High entropy metallic glass nanoparticles(HEMG NPs)are very promising materials for energy conversion due to the wide tuning possibilities of electrochemical potentials offered by their multimetallic character combine...High entropy metallic glass nanoparticles(HEMG NPs)are very promising materials for energy conversion due to the wide tuning possibilities of electrochemical potentials offered by their multimetallic character combined with an amorphous structure.Up until now,the generation of these HEMG NPs involved tedious synthesis procedures where the generated particles were only available on highly specialized supports,which limited their widespread use.Hence,more flexible synthetic approaches to obtain colloidal HEMG NPs for applications in energy conversion and storage are highly desirable.We utilized pulsed laser ablation of bulk high entropy alloy targets in acetonitrile to generate colloidal carbon-coated CrCoFeNiMn and CrCoFeNiMnMo HEMG NPs.An in-depth analysis of the structure and elemental distribution of the obtained nanoparticles down to single-particle levels using advanced transmission electron microscopy(TEM),energy-dispersive X-ray spectroscopy(EDX),X-ray diffraction(XRD),and Xray photoelectron spectroscopy(XPS)methods revealed amorphous quinary and senary alloy phases with slight manganese oxide/hydroxide surface segregation,which were stabilized within graphitic shells.Studies on the catalytic activity of the corresponding carbon-HEMG NPs during oxygen evolution and oxygen reduction reactions revealed an elevated activity upon the incorporation of moderate amounts of Mo into the amorphous alloy,probably due to the defect generation by atomic size mismatch.Furthermore,we demonstrate the superiority of these carbon-HEMG NPs over their crystalline analogies and highlight the suitability of these amorphous multi-elemental NPs in electrocatalytic energy conversion.展开更多
Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications owing to their enhanced catalytic,optical,and magnetic properties,which are often better than their ...Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications owing to their enhanced catalytic,optical,and magnetic properties,which are often better than their monometallic counterparts.Most of their properties strongly depend on their chemical composition,crystallographic structure,and phase distribution.However,little is known of how their crystal structure,on the nanoscale,transforms over time at elevated temperatures,even though this knowledge is highly relevant in case nanoparticles are used in,e.g.,high-temperature catalysis.Au-Fe is a promising bimetallic system where the low-cost and magnetic Fe is combined with catalytically active and plasmonic Au.Here,we report on the in s/fi;temporal evolution of the crystalline ordering in Au-Fe nanoparticles,obtained from a modern laser ablation in liquids synthesis.Our in-depth analysis,complemented by dedicated atomistic simulations,includes a detailed structural characterization by X-ray diffraction and transmission electron microscopy as well as atom probe tomography to reveal elemental distributions down to a single atom resolution.We show that the Au-Fe nanoparticles initially exhibit highly complex internal nested nanostructures with a wide range of compositions,phase distributions,and size-depended microstrains.The elevated temperature induces a diffusion-controlled recrystallization and phase merging,resulting in the formation of a single face-centered-cubic ultrastructure in contact with a body-centered cubic phase,which demonstrates the metastability of these structures.Uncovering these unique nanostructures with nested features could be highly attractive from a fundamental viewpoint as they could give further insights into the nanoparticle formation mechanism under non-equilibrium conditions.Furthermore,the in situ evaluation of the crystal structure changes upon heating is potentially relevant for high-temperature process utilization of bimetallic nanoparticles,e.g.,during catalysis.展开更多
Alginate is a widely used hydrogel in tissue engineering owing to its simple and non-cytotoxic gelation process, ease of use, and abundance. However, unlike hydrogels derived from mammalian sources such as collagen, a...Alginate is a widely used hydrogel in tissue engineering owing to its simple and non-cytotoxic gelation process, ease of use, and abundance. However, unlike hydrogels derived from mammalian sources such as collagen, alginate does not contain cell adhesion Iigands. Here, we present a novel laser ablation technique for the in situ embedding of gold and iron nanoparticles into hydrogels. We hypothesized that integration of metal nanoparticles in alginate could serve as an alternative material because of its chemical biofunctionalization ability （coupling of RGD ligands） to favor cell adhesion. Cytocompatibility and biofunctionality of the gels were assessed by cell culture experiments using fibroblasts and endothelial cells. Nanoparticles with an average particle size of 3 nm （gold） and 6 nm （iron） were generated and stably maintained in alginate for up to 6 months. Using an extrusion system, several centimeter-long alginate tubes with an outer diameter of approximately 3 mm and a wall thickness of approximately 150 μm were manufactured. Confocal microscopy revealed homogeneously distributed nanoparticle agglomerates over the entire tube volume. Endothelial cells seeded on iron-loaded gels showed significantly higher viability and an increased degree of spreading, and the number of attached cells was also elevated in comparison to the control and gold-loaded alginates. We conclude that laser-based in situ integration of iron nanoparticles （40.01 wt.%） in alginate is a straightforward method to generate composite materials that favor the adhesion of endothelial cells. In addition, we show that nanoparticle integration does not impair the alginate＇s gelation and 3D biofabrication properties.展开更多
文摘High entropy metallic glass nanoparticles(HEMG NPs)are very promising materials for energy conversion due to the wide tuning possibilities of electrochemical potentials offered by their multimetallic character combined with an amorphous structure.Up until now,the generation of these HEMG NPs involved tedious synthesis procedures where the generated particles were only available on highly specialized supports,which limited their widespread use.Hence,more flexible synthetic approaches to obtain colloidal HEMG NPs for applications in energy conversion and storage are highly desirable.We utilized pulsed laser ablation of bulk high entropy alloy targets in acetonitrile to generate colloidal carbon-coated CrCoFeNiMn and CrCoFeNiMnMo HEMG NPs.An in-depth analysis of the structure and elemental distribution of the obtained nanoparticles down to single-particle levels using advanced transmission electron microscopy(TEM),energy-dispersive X-ray spectroscopy(EDX),X-ray diffraction(XRD),and Xray photoelectron spectroscopy(XPS)methods revealed amorphous quinary and senary alloy phases with slight manganese oxide/hydroxide surface segregation,which were stabilized within graphitic shells.Studies on the catalytic activity of the corresponding carbon-HEMG NPs during oxygen evolution and oxygen reduction reactions revealed an elevated activity upon the incorporation of moderate amounts of Mo into the amorphous alloy,probably due to the defect generation by atomic size mismatch.Furthermore,we demonstrate the superiority of these carbon-HEMG NPs over their crystalline analogies and highlight the suitability of these amorphous multi-elemental NPs in electrocatalytic energy conversion.
文摘Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications owing to their enhanced catalytic,optical,and magnetic properties,which are often better than their monometallic counterparts.Most of their properties strongly depend on their chemical composition,crystallographic structure,and phase distribution.However,little is known of how their crystal structure,on the nanoscale,transforms over time at elevated temperatures,even though this knowledge is highly relevant in case nanoparticles are used in,e.g.,high-temperature catalysis.Au-Fe is a promising bimetallic system where the low-cost and magnetic Fe is combined with catalytically active and plasmonic Au.Here,we report on the in s/fi;temporal evolution of the crystalline ordering in Au-Fe nanoparticles,obtained from a modern laser ablation in liquids synthesis.Our in-depth analysis,complemented by dedicated atomistic simulations,includes a detailed structural characterization by X-ray diffraction and transmission electron microscopy as well as atom probe tomography to reveal elemental distributions down to a single atom resolution.We show that the Au-Fe nanoparticles initially exhibit highly complex internal nested nanostructures with a wide range of compositions,phase distributions,and size-depended microstrains.The elevated temperature induces a diffusion-controlled recrystallization and phase merging,resulting in the formation of a single face-centered-cubic ultrastructure in contact with a body-centered cubic phase,which demonstrates the metastability of these structures.Uncovering these unique nanostructures with nested features could be highly attractive from a fundamental viewpoint as they could give further insights into the nanoparticle formation mechanism under non-equilibrium conditions.Furthermore,the in situ evaluation of the crystal structure changes upon heating is potentially relevant for high-temperature process utilization of bimetallic nanoparticles,e.g.,during catalysis.
文摘Alginate is a widely used hydrogel in tissue engineering owing to its simple and non-cytotoxic gelation process, ease of use, and abundance. However, unlike hydrogels derived from mammalian sources such as collagen, alginate does not contain cell adhesion Iigands. Here, we present a novel laser ablation technique for the in situ embedding of gold and iron nanoparticles into hydrogels. We hypothesized that integration of metal nanoparticles in alginate could serve as an alternative material because of its chemical biofunctionalization ability （coupling of RGD ligands） to favor cell adhesion. Cytocompatibility and biofunctionality of the gels were assessed by cell culture experiments using fibroblasts and endothelial cells. Nanoparticles with an average particle size of 3 nm （gold） and 6 nm （iron） were generated and stably maintained in alginate for up to 6 months. Using an extrusion system, several centimeter-long alginate tubes with an outer diameter of approximately 3 mm and a wall thickness of approximately 150 μm were manufactured. Confocal microscopy revealed homogeneously distributed nanoparticle agglomerates over the entire tube volume. Endothelial cells seeded on iron-loaded gels showed significantly higher viability and an increased degree of spreading, and the number of attached cells was also elevated in comparison to the control and gold-loaded alginates. We conclude that laser-based in situ integration of iron nanoparticles （40.01 wt.%） in alginate is a straightforward method to generate composite materials that favor the adhesion of endothelial cells. In addition, we show that nanoparticle integration does not impair the alginate＇s gelation and 3D biofabrication properties.
