An oscillator(OSC)with a metamaterial resonator based on high-Q is designed to improve the phase noise in Kband.The proposed metamaterial resonator is a lattice structure resonator(LSR)that is designed to be high-Q by...An oscillator(OSC)with a metamaterial resonator based on high-Q is designed to improve the phase noise in Kband.The proposed metamaterial resonator is a lattice structure resonator(LSR)that is designed to be high-Q by a strong coupling of E-field at the resonance frequency.Thus the output of OSC is about 12.5dBm at the f0.The phase noise is 109.477dBc/Hz at 100kHz offset frequency.展开更多
We propose a novel resonator that can reduce magnetic field leakage using a ferrite plate. The proposed resonator consists of a rectangular loop, a ferrite plate, and an L-matching network. The ferrite plate is used a...We propose a novel resonator that can reduce magnetic field leakage using a ferrite plate. The proposed resonator consists of a rectangular loop, a ferrite plate, and an L-matching network. The ferrite plate is used as an H-field reflector to direct more H-field to each resonator, and the L-matching network is employed to match the 50 Ω of the feed cable at 13.56 MHz. Two identical resonators with dimensions of 30 cm × 15 cm are separated by 50 cm, and the resulting transmission efficiency is about ?12.3 dB at 13.56 MHz. This is about 4.2 dB higher than the resonators without the ferrite plate.展开更多
文摘An oscillator(OSC)with a metamaterial resonator based on high-Q is designed to improve the phase noise in Kband.The proposed metamaterial resonator is a lattice structure resonator(LSR)that is designed to be high-Q by a strong coupling of E-field at the resonance frequency.Thus the output of OSC is about 12.5dBm at the f0.The phase noise is 109.477dBc/Hz at 100kHz offset frequency.
文摘We propose a novel resonator that can reduce magnetic field leakage using a ferrite plate. The proposed resonator consists of a rectangular loop, a ferrite plate, and an L-matching network. The ferrite plate is used as an H-field reflector to direct more H-field to each resonator, and the L-matching network is employed to match the 50 Ω of the feed cable at 13.56 MHz. Two identical resonators with dimensions of 30 cm × 15 cm are separated by 50 cm, and the resulting transmission efficiency is about ?12.3 dB at 13.56 MHz. This is about 4.2 dB higher than the resonators without the ferrite plate.