Modeling the efects of fracture infll on frequency‑dependent anisotropy and AVO response of a fractured porous layer

In a fractured porous hydrocarbon reservoir,wave velocities and refections depend on frequency and incident angle.A proper description of the frequency dependence of amplitude variations with ofset(AVO)signatures should allow efects of fracture inflls and attenuation and dispersion of fractured media.The novelty of this study lies in the introduction of an improved approach for the investigation of incident-angle and frequency variations-associated refection responses.The improved AVO modeling method,using a frequency-domain propagator matrix method,is feasible to accurately consider velocity dispersion predicted from frequency-dependent elasticities from a rock physics modeling.And hence,the method is suitable for use in the case of an anisotropic medium with aligned fractures.Additionally,the proposed modeling approach allows the combined contributions of layer thickness,interbedded structure,impedance contrast and interferences to frequency-dependent refection coefcients and,hence,yielding seismograms of a layered model with a dispersive and attenuative reservoir.Our numerical results show bulk modulus of fracture fuid signifcantly afects anisotropic attenuation,hence causing frequencydependent refection abnormalities.These implications indicate the study of amplitude versus angle and frequency(AVAF)variations provides insights for better interpretation of refection anomalies and hydrocarbon identifcation in a layered reservoir with vertical transverse isotropy(VTI)dispersive media.

Design and preliminary test of tritiated water online detector system based on plastic scintillators

In this study,an online detector system based on plastic scintillators is designed to monitor the activity of tritiated water in the liquid effluents of nuclear power plants.The feasibility of the detector is verified via simulation on Geant4,and the optimal detector structure size is determined.A back-end electronics system is designed and an experimental measurement platform forβ-rays based on a ^(40)KCl solution is constructed.Thirteen ^(40)KC solutions with different activities ranging from 10 to4500 Bq/L are measured,and 1300 V is determined as the optimal operating high voltage of the photomultiplier tubes.A linear fit is performed in 10-min counts,and the maximum linear goodness of fit(R^(2))achieved is 0.9992.Long-term stability measurements are performed for two detectors,one filled with air and the other with a ^(40)KCl solution exhibiting an activity of 2000 Bq/L.The relative deviation of the counts of the detector system every 10 min is 0.998%when the ^(40)KCl solution is used,and the maximum Gaussian R^(2) of the counts is 0.9849.

Simulation results of the online tritiated water measurement system

Currently,the liquid scintillation method is widely used to measure the activity of tritiated water in the primary circuit of nuclear power plants,which leads to the continuous production of radioactive waste during measurement.In addition,the real-time activity information of tritiated water cannot be obtained.To solve this problem,herein we present an online tritiated water measurement method based on plastic scintillators that used the optical transport process in the Geant 4 software toolkit to build a model of plastic scintillation detection for tritiated water.Through simulation,the basic geometric dimensions of the detector were determined.In this dimension,using one detector to measure for 3 h,when the tritiated water activity was 100 Bq/L,its resolution was 16%(16 Bq/L).In addition,calculations were performed for the presence of other background signals to obtain the minimum detectable concentration.