Dissolution mechanism of a deep-buried sandstone reservoir in a deep water area:A case study from Baiyun Sag,Zhujiang River(Pearl River)Mouth Basin

Dissolution mechanism and favorable reservoir distribution prediction are the key problems restricting oil and gas exploration in deep-buried layers.In this paper,the Enping Formation and Zhuhai Formation in Baiyun Sag of South China Sea was taken as a target.Based on the thin section,scanning electron microscopy,X-ray diffraction,porosity/permeability measurement,and mercury injection,influencing factors of dissolution were examined,and a dissolution model was established.Further,high-quality reservoirs were predicted temporally and spatially.The results show that dissolved pores constituted the main space of the Paleogene sandstone reservoir.Dissolution primarily occurred in the coarse-and medium-grained sandstones in the subaerial and subaqueous distributary channels,while dissolution was limited in fine-grained sandstones and inequigranular sandstones.The main dissolved minerals were feldspar,tuffaceous matrix,and diagenetic cement.Kaolinization of feldspar and illitization of kaolinite are the main dissolution pathways,but they occur at various depths and temperatures with different geothermal gradients.Dissolution is controlled by four factors,in terms of depositional facies,source rock evolution,overpressure,and fault activities,which co-acted at the period of 23.8–13.8 Ma,and resulted into strong dissolution.Additionally,based on these factors,high-quality reservoirs of the Enping and Zhuhai formations are predicted in the northern slope,southwestern step zone,and Liuhua uplift in the Baiyun Sag.

Benchmarking calculations of excitation energies and transition properties with spectroscopic accuracy of highly charged ions used for the fusion plasma and astrophysical plasma

Atomic radiative data such as excitation energies, transition wavelengths, radiative rates, and level lifetimes with high precision are the essential parameters for the abundance analysis, simulation, and diagnostics in fusion and astrophysical plasmas. In this work, we mainly focus on reviewing our two projects performed in the past decade. One is about the ions with Z■30 that are generally of astrophysical interest, and the other one is about the highly charged krypton(Z = 36)and tungsten(Z = 74) ions that are relevant in research of magnetic confinement fusion. Two different and independent methods, namely, multiconfiguration Dirac–Hartree–Fock(MCDHF) and the relativistic many-body perturbation theory(RMBPT) are usually used in our studies. As a complement/extension to our previous works for highly charged tungsten ions with open M-shell and open N-shell, we also mainly focus on presenting and discussing our complete RMBPT and MCDHF calculations for the excitation energies, wavelengths, electric dipole(E1), magnetic dipole(M1), electric quadrupole(E2), and magnetic quadrupole(M2) transition properties, and level lifetimes for the lowest 148 levels belonging to the 3l3configurations in Al-like W61+. We also summarize the uncertainties of our systematical theoretical calculations, by cross-checking/validating our datasets from our RMBPT and MCDHF calculations, and by detailed comparisons with available accurate observations and other theoretical calculations. The data are openly available in Science Data Bank at https://doi.org/10.57760/sciencedb.10569.

Absolute dielectronic recombination rate coefficients of highly charged ions at the storage ring CSRm and CSRe

Dielectronic recombination(DR)is one of the dominant electron-ion recombination mechanisms for most highly charged ions(HCIs)in cosmic plasmas,and thus,it determines the charge state distribution and ionization balance therein.To reliably interpret spectra from cosmic sources and model the astrophysical plasmas,precise DR rate coefficients are required to build up an accurate understanding of the ionization balance of the sources.The main cooler storage ring(CSRm)and the experimental cooler storage ring(CSRe)at the Heavy-Ion Research Facility in Lanzhou(HIRFL)are both equipped with electron cooling devices,which provide an excellent experimental platform for electron-ion collision studies for HCIs.Here,the status of the DR experiments at the HIRFL-CSR is outlined,and the DR measurements with Na-like Kr25^(+)ions at the CSRm and CSRe are taken as examples.In addition,the plasma recombination rate coefficients for Ar12^(+),14^(+),Ca14^(+),16^(+),17^(+),Ni19^(+),and Kr25^(+)ions obtained at the HIRFL-CSR are provided.All the data presented in this paper are openly available at https://doi.org/10.57760/sciencedb.j00113.00092.

异辛醇改性三氯氧钒催化体系催化乙烯/丙烯共聚合

以异辛醇改性三氯氧钒(VOCl_3·3(2-ethyl-hexanol))为催化剂前体,倍半乙基铝(EASC)为助催化剂,三氯乙酸乙酯(ETCA)为活化剂进行乙烯/丙烯共聚合,并与传统VOCl_3体系进行对比。考察了EASC和ETCA用量、反应温度对聚合的影响。随EASC用量的增加,2种催化体系活性均先增加后下降,VOCl_3·3(2-ethyl-hexanol)和VOCl_3体系分别在[Al]/[V]比为40和30时达到最高催化活性6. 15 kg EPR/g V·h和4. 97 kg EPR/g V·h。2种催化体系活性均随聚合温度的升高呈下降的趋势,VOCl_3·3(2-ethyl-hexanol)体系的下降幅度低于VOCl_3体系,表明异辛醇有效地稳定了生成的活性中心。差示扫描量热分析和核磁共振碳谱分析表明以VOCl_3·3(2-ethyl-hexanol)体系所合成的共聚物较VOCl_3体系有更高的丙烯插入率和更为无规的结构。

Zwitterionic polymer-coated porous poly(vinyl acetate–divinyl benzene)microsphere: A new support for enhanced performance of immobilized lipase

Enzyme immobilization has attracted great attention for improving the performance of enzymes in industrial applications.This work was designed to create a new support for Candida rugosa lipase(CRL)immobilization.A porous poly(vinyl acetate–divinyl benzene)microsphere coated by a zwitterionic polymer,poly(maleic anhydride-alt-1-octadecene)and N,N-dimethylethylenediamine derivative,was developed for CRL immobilization via hydrophobic binding.The catalytic activity,reaction kinetics,stabilities and reusability of the immobilized CRL were investigated.It demonstrated the success of the zwitterionic polymer coating and subsequent CRL immobilization on the porous microsphere.The immobilized lipase(p2-MS-CRL)reached27.6 mg·g^-1 dry carrier and displayed a specific activity 1.5 times higher than free CRL.The increase of Vmax and decrease of Kmwere also observed,indicating the improvement of catalytic activity and enzyme-substrate affinity of the immobilized lipase.Besides,p2-MS-CRL exhibited significantly enhanced thermal stability and pH tolerance.The improved performance was considered due to the interfacial activation regulated by the hydrophobic interaction and stabilization effect arisen by the zwitterionic polymer coating.This study has thus proved the advantages of the zwitterionic polymer-coated porous carrier for lipase immobilization and its potential for further development in various enzyme immobilizations.

Fabrication and characterization of epoxylated zwitterionic copolymergrafted silica nanoparticle as a new support for lipase immobilization

Our previous work proved that the thermal stability of Candida rugosa lipase(CRL)immobilized on zwitterionic polymer(poly(carboxybetaine methacrylate))grafted silica nanoparticle(SNP)was much higher than that on poly(glycidyl methecrylate)(pGMA)grafted SNP,while the latter showed significantly increased activity.Inspired by the research,we have herein proposed to synthesize copolymers of zwitterionic sulfobetaine methacrylate(SBMA)and GMA for CRL immobilization.The copolymers were grafted onto SNP surface at three GMA/SBMA(G/S)molar ratios(G100/S0,G50/S50,G10/S90),followed by the covalent coupling of CRL to the surface copolymers.The immobilized CRLs on the corresponding supports were denoted as p(G100-S0)-CRL,p(G50-S50)-CRL and p(G10-S90)-CRL.The enzyme loading increased with the increase of GMA content in the copolymer,while the activity varied with the grafted copolymer composition.Kinetic study proved the improvement of enzyme-substrate affinity after immobilization.In comparison to p(G100-S0)-CRL,p(G50-S50)-CRL and p(G10-S90)-CRL presented remarkably enhanced thermal stability and pH tolerance,and p(G10-S90)-CRL showed the highest stability.These results suggest that the copolymer design is promising for development as a versatile platform for enzyme immobilization.

Association between essential hypertension and polymorphisms of beta 1 adrenergic receptor gene G1165C (Gly389Arg) in Chinese Mongolian population

BACKGROUND： The prevalences of hypertension, cerebrovascular diseases, etc. are higher in Mongolian population because of the influence of various factors including genetics, geography, diet, etc. Therefore, it is helpful to develop researches on the genetics of various diseases including hypertension in Mongolian population. OBJECTIVE： To analyze the association between the polymorphism of beta1 adrenergic receptor （β1-AR） gene G1165C （Arg389Gly）, an important candidate gene for various diseases of cardiovascular system, and essential hypertension in Mongolian population. DESIGN ： A cross-sectional study SETTINGS： Department of Neurology, the First Affiliated Hospital of Inner Mongolia Medical College; Wulate Houqi Red Cross Society. PARTICIPANTS： The survey was carried out from February 2003 to March 2005. Totally 239 Mongolian residents, whose blood relations of 3 generations were all Mongolians, were selected from Wulate Houqi, Inner Mongolia, and they were all informed with the survey and detected items. Based on the diagnostic standard of hypertension set by WHO in 1999, the subjects were divided into two groups according to the level blood pressure： ① Normal blood pressure group （n=117）： systolic blood pressure （SBP） 〈 140 mm Hg （1 mm Hg =0.133 kPa）, diastolic blood pressure （DBP） 〈 90 mm Hg, and those having histories of cerebrovascular disease, heart disease, diseases of liver, kidney and tiroides, and diabetes mellitus were excluded. ② Essential hypertension group （n=122）： including 51 patients with simple high SBP. All the enrolled subjects had no blood relationship with each other, and had no history of miscegenation. METHODS ： The body height, body mass, waist circumference and blood lipids were measured routinely, and their habits of smoking and drinking were also investigated. Penpheral venous blood （5 mL） was drawn, the genome DNA was extracted, and the polymorphisms of the β1-AR Gl165C （Gly389Arg） genotype were detected with the Sequenom system. Polymerase chain reaction （PCR） experiment and SNP detection were performed in Huada Gene Laboratory of Bejing, then the univariate analysis of variance was applied in the sample comparison among groups, and the chi-square test was used to compare the genotypes and allele frequencies. The odd ratio （OR） and 95% confidence interval （CO were calculated. MAIN OUTCOME MEASURES： The distributions of β1-AR Gl165C （Gly389Arg） genotypes and alleles were observed. RESULTS： A11 the 239 subjects were involved in the analysis of results, and no one missed, ①Comparison of β1-AR G1165C （Gly389Arg） genotypes and allele distnbutions： In Mongolian population, the frequencies of CC and GG＋GC genotypes at β1-AR G1165C （Gly389Arg） site in the essential hypertension group （72%, 28%） were not significantly different from those in the normal blood pressure group （67%, 33%） （xz=0.841, P=-0.359; OR 0.773, 95%Cl： 0.445-1.342）; The frequencies of C and G alleles also had no significant differences between the essential hypertension group （85%, 15%） and the normal blood pressure group （82%, 18%） （x^2=1.136, P=-0.287; OR： 0.769, 95%Cl： 0.747-1.248）. ②The frequencies of CC and GG＋GC genotypes at β1-AR G1165C （Gly389Arg） site had no significant differences between the patients with simple high SBP （71%, 29%） and the normal blood pressure group （x^2=0.250, P=-0.617; OR： 0.833, 95%C/： 0.408-1.703）; The frequencies of C and G alleles were not significantly different between the patients with simple high SBP （86%, 14%） and the normal blood pressure group （x^2=0.670, P=-0.413; OR 0.766, 95%Cl： 0.404-1.453）. CONCLUSION： In Mongolian population, the distributions of the genotypes and alleles of β1-AR Gl165C （Gly389Arg） have no obvious differences between the subjects with normal blood pressure and the patients with essential hypertension （including simple SBP increase）, which suggests that G1165C （Glu389Asp） site of β1-AR gene may be not a genetic mark of essential hypertension and simple high SBP in Mongolian population.

Cross-classes domain inference with network sampling for natural resource inventory

There are two distinct types of domains,design-and cross-classes domains,with the former extensively studied under the topic of small-area estimation.In natural resource inventory,however,most classes listed in the condition tables of national inventory programs are characterized as cross-classes domains,such as vegetation type,productivity class,and age class.To date,challenges remain active for inventorying cross-classes domains because these domains are usually of unknown sampling frame and spatial distribution with the result that inference relies on population-level as opposed to domain-level sampling.Multiple challenges are noteworthy:(1)efficient sampling strategies are difficult to develop because of little priori information about the target domain;(2)domain inference relies on a sample designed for the population,so within-domain sample sizes could be too small to support a precise estimation;and(3)increasing sample size for the population does not ensure an increase to the domain,so actual sample size for a target domain remains highly uncertain,particularly for small domains.In this paper,we introduce a design-based generalized systematic adaptive cluster sampling(GSACS)for inventorying cross-classes domains.Design-unbiased Hansen-Hurwitz and Horvitz-Thompson estimators are derived for domain totals and compared within GSACS and with systematic sampling(SYS).Comprehensive Monte Carlo simulations show that(1)GSACS Hansen-Hurwitz and Horvitz-Thompson estimators are unbiased and equally efficient,whereas thelatter outperforms the former for supporting a sample of size one;(2)SYS is a special case of GSACS while the latter outperforms the former in terms of increased efficiency and reduced intensity;(3)GSACS Horvitz-Thompson variance estimator is design-unbiased for a single SYS sample;and(4)rules-ofthumb summarized with respect to sampling design and spatial effect improve precision.Because inventorying a mini domain is analogous to inventorying a rare variable,alternative network sampling procedures are also readily available for inventorying cross-classes domains.

Evaluating alternative hypotheses behind biodiversity and multifunctionality relationships in the forests of Northeastern China

Background:The importance of biodiversity in maintaining multiple ecosystem functions has been widely accepted.However,the specific mechanisms affecting biodiversity and ecosystem multifunctionality(BEMF)relationships in forests are largely unknown.This is particularly evident for the macroscale of a large forested landscape.Methods:Based on 412 one-tenth hectare field plots distributed over forested areas across northeastern China,we evaluated three alternative hypotheses explaining the relationships between BEMF,namely:niche complementarity,mass ratio,and vegetation quantity effect.We used Rao's quadratic entropy and community weighted mean trait values to quantify forest“biodiversity”.These two variables represent two complementary aspects of functional properties,which are in line with niche complementary and mass ratio effects,respectively.Results:Ecosystem multifunctionality was negatively associated with the community weighted mean values of acquisitive traits(a proxy of mass ratio effect).Rao's quadratic entropy(a proxy of niche complementarity)had no relationship with ecosystem multifunctionality.Higher stand biomass greatly increased ecosystem multifunctionality,which is in line with the vegetation quantity effect.Our results confirm that in the temperate forests of northeastern China,the relationship of BEMF was primarily affected by vegetation quantity,followed by mass ratio effects.Conclusions:The results of this study contribute to a better understanding of the main drivers of ecosystem multifunctionality in forest ecosystems.The results of this study provide additional evidence to support the vegetation quantity and mass ratio hypotheses in forest ecosystems.

Conjugation of a zwitterionic polymer with dimethyl chains to lipase significantly increases the enzyme activity and stability

Enzyme-polymer conjugates are complex molecules with great practical significance.This work was designed to develop a novel enzyme-polymer conjugate by covalently coupling a zwitterionic polymer with side dimethyl chains(pID)to Candida rugosa lipase(CRL)via the reaction between the anhydrides of polymer chains with the amino groups of the enzyme.The resulting two CRL-pID conjugates with different pID grafting densities were investigated in term of the catalytic activity,stability and structural changes.In comparison with native CRL,both the CRL conjugates displayed 2.2 times higher activity than the native enzyme,and showed an increase in the maximum reaction rate(V_(max))and a decrease in the Michaelis constant(K_(m)),thus resulting in about three-fold increases in the catalytic efficiency(k_(cat)/K_(m)).These are mainly attributed to the activation of lipase by the hydrophobic alky side chains.Moreover,the thermostability and pH tolerance of the lipase conjugates were significantly enhanced due to the stabilizing effect of the zwitterion moieties.For instance,a five-fold increase of the enzyme half-life at 50℃ for the high-pID conjugated CRL was observed.Spectroscopic studies reveal that the pID conjugation protected the enzyme in the changes in its microenvironment and conformation,well correlating with enhanced activity and stability of lipase conjugates.The findings indicate that enzyme conjugation to the zwitterionic polymer is promising for improving enzyme performance and deserves further development.

Drivers of tree demographic trade-offs in a temperate forest

Background: The demographic trade-offs(i.e. growth and survival) play important roles in forest dynamics and they are driven by multiple factors, including species’ inherent life-history strategies(such as shade-tolerance and mycorrhizal type), neighborhood interactions(such as conspecific negative density dependence, CNDD), and abiotic environment pressures. Although studies found that CNDD occurred in tropical and temperate forest,attempts to identify how the variations in CNDD control their impacts on growth and survival remain debate. In the present study, we conducted an extensive field survey, and analyzed demographic rates from 24 co-occurring temperate tree species, in order to test the importance of CNDD in shaping the growth-survival trade-offs.Results: Our study found that density dependence and environmental filtering were strong predictors for individual growth-survival trade-offs, while they showed variations across shade-intolerant and ectomycorrhizal species, as well as saplings and juveniles with more negative CNDD. Species growth showed positive relationship with mortality. And our results also support the fact that CNDD drives species growth-survival trade-offs at the community level with environmental stress.Conclusions: Our study indicates that biotic interactions such as density dependence and environment filtering played an important role in growth-survival trade-offs, and confirmed that the Janzen-Connell hypothesis in temperate forest was associated with species life-history strategies. In addition, shade-tolerance, mycorrhizal type and life-stage of forest species responded differently to CNDD, thus providing insights regarding different community assembly mechanisms and their interactions. Therefore, it is important to take species survival with growth and species life-history strategies into account when focusing on forest dynamics.

Genetic predisposition to essential hypertension in a Mongolian population Detecting the C825T polymorphism of the G-protein beta 3 subunit gene

BACKGROUND： The prevalences of hypertension, cerebrovascular diseases, etc. are higher in Mongolian population because of the influence of various factors including genetics, geography, diet, etc. Therefore, it is helpful for prevention to develop researches on the genetics of various diseases including hypertension in Mongolian population. OBJECTIVE： To analyze the association between C825T polymorphisms of G-protein beta 3 subunit gene （GNB3）, the important candidate gene of various disease of cardiovascular system, and Mongolian patients with essential hypertension. DESIGN： A comparative observation. SETTINGS： Department of Neurology, the First Affiliated Hospital of Inner Mongolia Medical College; Wulate Houqi Red Cross Society. PARTICIPANTS： Totally 267 Mongolian residents, whose blood relations of 3 generations were all Mongolians, were selected from Wulate Houqi, Inner Mongolia. The patients were screened based on the diagnostic standard of hypertension set by WHO in 1999, and the enrolled subjects were divided into two groups according to the level of blood pressure： ① Normal blood pressure group （n =124）： 64 males and 60 females, systolic blood pressure （SBP） 〈 140 mm Hg （1 mm Hg=0.133 kPa）, diastolic blood pressure （DBP） 〈 90 mm Hg;②Essential hypertension group （n =143）： 71 males and 72 females, including 60 patients with simple high SBP （SBP ranged 145 to 195 mm Hg, whereas DBP 〈 90 mm Hg）. METHODS： Peripheral venous blood （5 mL） was drawn from all the subjects, the genome DNA was extracted, and the polymorphisms of the GNB3 C825T genotype were detected with the Sequenom system. Polyrnerase chain reaction （PCR） experiment and SNP detection were performed in Beijing Huada gene laboratory. Then the univariate analysis of variance was applied in the sample comparison among groups, and the chi-square test was used to compare the genotypes and allele frequencies. The odd ratio （OR） and 95% confidence interval （CI） were calculated. MAIN OUTCOME MEASURES： The distributions of GNB3 C825T genotypes and alleles were observed. RESULTS： All the 267 Mongolian subjects were involved in the analysis of results.① GNB3 C825T genotypes： In Mongolian population, the frequencies of CC, CT and TT genotypes at GNB3 C825T site in the essential hypertension group （48%, 41%, 11%） were not obvious different from those in the normal blood pressure group （43%, 47%, 10%, x^2 =0.162, P =0.688; OR：1.176, 95%CI： 0.533- 2.592）, whereas there were also no obvious differences between the simple high SBP group （57%, 35%, 8%） and the normal blood pressure group （x^2 =0.733, P =0.392; OR：1.957, 95%CI： 0.623- 6.143）. ②GNB3 C825T alleles： In Mongolian population, The frequencies of C and T alleles in the essential hypertension group （69%, 31%） were not obviously different from those in the normal blood pressure group （67%, 33%, x^2 =0.094, P = 0.759; OR：0.945, 95%CI：0.657 - 1.358）, whereas there were also no obvious differences between the simple high SBP group （74%, 26%） and the normal blood pressure group （ x^2 =2.133, P =0.144; OR：0.697, 95%CI： 0.428- 1.133）. CONCLUSION： GNB3 C825T site may be not a genetic marker of essential hypertension and simple high SBP in Mongolian population.

A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction

Craniomaxillofacial reconstruction implants,which are extensively used in head and neck surgery,are conventionally made in standardized forms.During surgery,the implant must be bended manually to match the anatomy of the individual bones.The bending process is time-consuming,especially for inexperienced surgeons.Moreover,repetitive bending may induce undesirable internal stress concentration,resulting in fatigue under masticatory loading in v iv o and causing various complications such as implant fracture,screw loosening,and bone resorption.There have been reports on the use of patient-specific 3D-printed implants for craniomaxillofacial reconstruction,although few reports have considered implant quality.In this paper,we present a systematic approach for making 3D-printed patientspecific surgical implants for craniomaxillofacial reconstruction.The approach consists of three parts:First,an easy-to-use design module is developed using Solidworks®software,which helps surgeons to design the implants and the axillary fixtures for surgery.Design engineers can then carry out the detailed design and use finite-element modeling(FEM)to optimize the design.Second,the fabrication process is carried out in three steps:0 testing the quality of the powder;(2)setting up the appropriate process parameters and running the 3D printing process;and (3)conducting post-processing treatments(i.e.,heat and surface treatments)to ensure the quality and performance of the implant.Third,the operation begins after the final checking of the implant and sterilization.After the surgery,postoperative rehabilitation follow-up can be carried out using our patient tracking software.Following this systematic approach,we have successfully conducted a total of 41 surgical cases.3D-printed patient-specific implants have a number of advantages;in particular,their use reduces surgery time and shortens patient recovery time.Moreover,the presented approach helps to ensure implant quality.

Analytical Framework for Market-oriented DSR Flexibility Integration and Management

Integration and management of the flexibility of Demand Side Resources (DSR) in today’s energy systems plays a significant role in building up a sustainable society. However, the challenges of understanding, predicating and handling the uncertainties associated this subject to a great extent hamper its development. In this paper, an analytical framework based on a multi-portfolio setup in presence of a deregulated power market is proposed to address such challenges by adopting the thinking in modern portfolio theory (MPT). A Numerical example that targets on analyzing the risk and return for various flexibility pricing strategies are presented to illustrate some features of the framework.

Smoking and Alzheimer's disease among Mongolian and Han Chinese aged 55 years and over living in the Inner Mongolia farming area of China

Residents aged 55 years or older from 27 communities and two settlements in Xilingol League of Inner Mongolia were selected for participation in an Alzheimer＇s disease epidemiological investigation from June 2008 to June 2009, including 3 259 Mongolians and 5 887 Han Chinese. The Mongolian subjects in the Alzheimer＇s disease group were at age of 55 years or older （on average）, and more of them were male, illiterate and/or had a history of coronary artery disease and/or diabetes compared with the Mongolian subjects in the non-Alzheimer＇s disease group. The Han Chinese subjects in the AIzheimer＇s disease group were at age of 55 years or older （on average） and more of them were women, illiterate and/or had a history of coronary artery disease, and less of them had a history of alcohol consumption compared with the non-Alzheimefs disease group. Non-conditional multivariate stepwise logistic regression identified that male gender, increasing age and having a history of diabetes and/or coronary heart disease were associated with higher odds of Alzheimer＇s disease among Mongolians while having an educational background was associated with lower odds （OR = 0.259, 95%C/0.174-0.386）. Among the Han Chinese subjects, male gender, increasing age and having a history of coronary heart disease and/or hypertension was associated with higher odds of Alzheimer＇s disease, while having an educational background was associated lower odds （OR = 0.271, 95%C/0.192-0.381）. The results also indicated that extremely heavy smoking may be a risk factor for Alzheimer＇s disease in Mongolian males aged over 55 years. There was no significant difference in smoking habits between the Mongolian and Han Chinese subjects with Alzheimer＇s disease.

Mismatch between species distribution and climatic niche optima in relation to functional traits

Background:Forecasts of climate change impacts on biodiversity often assume that the current geographical distributions of species match their niche optima.However,empirical evidence has challenged this assumption,suggesting a mismatch.We examine whether the mismatch is related to functional traits along temperature or precipitation gradients.Methods:The observed distributions of 32 tree species in northeast China were evaluated to test this mismatch.Bayesian models were used to estimate the climatic niche optima,i.e.the habitats where the highest species growth and density can be expected.The mismatch is defined as the difference between the actual species occurrence in an assumed niche optimum and the habitat with the highest probability of species occurrence.Species’functional traits were used to explore the mechanisms that may have caused the mismatches.Results:Contrasting these climatic niche optima with the observed species distributions,we found that the distribution-niche optima mismatch had high variability among species based on temperature and precipitation gradients.However,these mismatches depended on functional traits associated with competition and migration lags only in temperature gradients.Conclusions:We conclude that more relevant research is needed in the future to quantify the mismatch between species distribution and climatic niche optima,which may be crucial for future designs of forested landscapes,species conservation and dynamic forecasting of biodiversity under expected climate change.

Influence of nonlinear spatial distribution of stress and strain on solving problems of solid mechanics

The stress and the strain should be defined as statistical variables averaged over the representative volume elements for any real continuum system.It is shown that their nonlinear spatial distributions undermine the classical framework of solid mechanics and may cause non-ignorable errors to the solutions.With considering the high-order gradients of the stress and the strain,a two-step solution scheme is proposed to compensate for the influence.Through a revisit to three simple but typical problems,i.e.,the hole size-dependence of the fracture strength of perforated plates,the indentation depth-dependence of the measured elastic modulus by micro-indentation tests,and the tensile necking of metallic materials as well as hyperelastic materials,the effect of the nonlinear spatial distribution of stress and strain on solving these problems is illustrated.The observed size effect and the instability of deformation can be quantitatively explained if the effect is properly considered by the proposed method.

Forest observational studies-an essential infrastructure for sustainable use of natural resources

This contribution complements Forest Ecosystems＇ Thematic Series on ＂Forest Observational Studies＂. We provide essential clarification regarding the definition and purpose of long-term field studies, review some of the extensive literature and discuss different approaches to collecting field data. We also describe two newly established forest observational networks that serve to illustrate the scope and diversity of forest field studies. The first is a large-scale network of forest observational studies in prominent natural forest ecosystems in China. The second example demonstrates observational studies in mixed and uneven-aged pine-oak forests which are selectively managed by local communities in Mexico. We summarize the potential for analysing and modeling forest ecosystems within interdisciplinary projects and provide argumentation in favour of long-term institutional commitment to maintaining forest observational field studies.

A General Framework of Reversible Data Hiding with Controlled Contrast Enhancement

This paper proposes a two-step general framework for reversible data hiding(RDH)schemes with controllable contrast enhancement.The first step aims at preserving visual perception as much as possible on the basis of achieving high embedding capacity(EC),while the second step is used for increasing image contrast.In the second step,some peak-pairs are utilized so that the histogram of pixel values is modified to perform histogram equalization(HE),which would lead to the image contrast enhancement.However,for HE,the utilization of some peak-pairs easily leads to over-enhanced image contrast when a large number of bits are embedded.Therefore,in our proposed framework,contrast over-enhancement is avoided by controlling the degree of contrast enhancement.Since the second step can only provide a small amount of data due to controlled contrast enhancement,the first one helps to achieve a large amount of data without degrading visual quality.Any RDH method which can achieve high EC while preserve good visual quality,can be selected for the first step.In fact,Gao et al.’s method is a special case of our proposed framework.In addition,two simple and commonly-used RDH methods are also introduced to further demonstrate the generalization of our framework.

Bioinformatics and Expression Analysis of CaERF Gene in Capsicum

AP2/ERF transcription factor is a kind of plant-specific transcription factor,which is widely involved in the whole process of plant growth and development,and has important regulatory effects in plant secondary metabolism.In this study,the CaERF gene was cloned from Capsicum annuum by RT-PCR.The bioinformatics and expression analysis revealed that the CDS region of this gene is 795 bp in length,encoding 264 amino acids,and the molecular weight and isoelectric point of the protein are 30.1 KD and 5.74,respectively;the gene encodes a 58-amino acid DNA-binding domain AP2 at 533-706,which is closest to Capsicum chinense in genetics;and the gene is expressed early in the fruit development from 16 to 20 d after flowering,and related to the level of pun 1 gene expression.The cloning and expression analysis of CaERF transcription factor gene laid a foundation for further study on the regulation of capsaicin synthesis.