Experimental researches on adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus were conducted. Results showed that performances of three filter media were all in line with Langmuir...Experimental researches on adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus were conducted. Results showed that performances of three filter media were all in line with Langmuir isotherm, and activated alumina adsorptive performance was much better than silica sand and an-thracite coal for phosphorus removal. The adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus was 3333μg/g, 49μg/g and 100μg/g respectively. Activated alumina displayed adsorp-tive function well for phosphorus, because its inner porosity, specific surface area and surface isoelectric pH value were all higher than those of other two filter media. While activated alumina was used as filter material in water treatment process, phosphorus would be removed strongly because of adsorptive characteristic of activated alumina.展开更多
We focused on the need for the phosphorus removal in water plant process. As for surface water plant, the enhancement of phosphorus removal in purification process can raise the biological stability of effluent potabl...We focused on the need for the phosphorus removal in water plant process. As for surface water plant, the enhancement of phosphorus removal in purification process can raise the biological stability of effluent potable water. This study conducted the effect of two water treatment processes for phosphorus removal, including the PAC + AAL (the treatment process using poly aluminum chloride and activated aluminum oxide) and PFS + AAL (the treatment process using poly ferric sulfate and activated aluminum oxide). The aim is to use the adsorption capacity of activated aluminum oxide to increase the removal of phosphorus in filtration process. The result showed that the two processes both can remove the phosphorus concentration to reach below 10 μg/L, and the PAC + AAL is the better process.展开更多
文摘Experimental researches on adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus were conducted. Results showed that performances of three filter media were all in line with Langmuir isotherm, and activated alumina adsorptive performance was much better than silica sand and an-thracite coal for phosphorus removal. The adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus was 3333μg/g, 49μg/g and 100μg/g respectively. Activated alumina displayed adsorp-tive function well for phosphorus, because its inner porosity, specific surface area and surface isoelectric pH value were all higher than those of other two filter media. While activated alumina was used as filter material in water treatment process, phosphorus would be removed strongly because of adsorptive characteristic of activated alumina.
文摘We focused on the need for the phosphorus removal in water plant process. As for surface water plant, the enhancement of phosphorus removal in purification process can raise the biological stability of effluent potable water. This study conducted the effect of two water treatment processes for phosphorus removal, including the PAC + AAL (the treatment process using poly aluminum chloride and activated aluminum oxide) and PFS + AAL (the treatment process using poly ferric sulfate and activated aluminum oxide). The aim is to use the adsorption capacity of activated aluminum oxide to increase the removal of phosphorus in filtration process. The result showed that the two processes both can remove the phosphorus concentration to reach below 10 μg/L, and the PAC + AAL is the better process.
