The effects of deformation parameters and cooling rates on the aging behavior of AZ80+0.4%Ce

The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion unit.The deformed cylindrical specimens were cooled at a cooling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was weakened.Both continuous and discontinuous dynamic recrystallization mechanisms were involved in contributing to the grain refinement for all specimens investigated.And a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow cooling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface section.For specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were predominant.After aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those decorating the grain boundaries,changed the competition pictures for the LPS and precipitates of other shapes after aging.Interestingly,LPS dominated the areas for the center section of the specimens after aging regardless of deformation temperatures.Low temperature deformation with high SRPC followed by rapid cooling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.

Evolution of microstructure and texture of AZ80 magnesium alloy under hot torsion with constant decreasing temperature rate

Hot torsion tests for AZ80 magnesium alloy were carried out in the temperature range of 380℃-260℃,with a constant decreasing temperature rate of 10℃/s in order to weaken the basal texture and refine the grains.The results indicated that the average grain sizes were refined forming gradient structure with increasing specimen radial position from center(12.2-5.4μm),and that the initial basal texture intensity of the extruded magnesium alloy was weakened from 46.2 to 8.3.Furthermore,the extension twins(ETs)could be disintegrated from the twins forming separated twins with smaller sizes.Interestingly,ETs with the same twin variant intersecting with each other could be coalesced forming grains with similar orientation,while ETs with different twin variants were separated by twins boundaries contributing to grain refinement.Moreover,in addition to the conventional continuous dynamic recrystallized(CDRX)grains with 30˚orientation rotated around C-axis of the parent grains,CDRXed grains with 30˚rotation around a-axis and random rotation axis were also discerned.Besides,the CDRX evolution induced twins were also elaborated,exhibiting the complex competition between CDRX and twining.Hot torsion deformation with constant decreasing temperatures rate is an effective way of grain refinement and texture modification.

Identification of Fusarium wilt resistance gene SiRLK1 in Sesamum indicum L.

Sesame Fusarium wilt(SFW),caused by Fusarium oxysporum f.sp.sesami(Fos),is one of the most devastating diseases affecting sesame cultivation.Deciphering the genetic control of SFW resistance is pivotal for effective disease management in sesame.An inheritance study on a cross between the highly resistant variety Yuzhi 11 and the highly susceptible accession Sp1 using a Fos pathogenicity group 1 isolate indicated that resistance was conferred by a single dominant allele.The target locus was located in a 1.24 Mb interval on chromosome 3 using a combination of cross-population association mapping and bulked segregant analysis.Fine genetic mapping further narrowed the interval between 21,350 and 21,401 kb.The locus Sindi_0812400 was identified as the SFW resistance gene and officially designated SiRLK1.This gene encodes a specific malectin/receptor-like protein kinase with three putative tandem kinase domains and is considered a kinase fusion protein.Sequence analysis revealed that a high proportion(49.44%)of variants within the locus was located within the kinase domainⅢ,and several of which were evidently associated with the diversity in SFW response,indicating the critical role of kinase domainⅢin expression of disease resistance.These findings provide valuable information for further functional analysis of SFW resistance genes and marker-assisted resistance breeding in sesame.