Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

Development of a high-strength Mg alloy with superior ductility through a unique texture modification from equal channel angular pressing

In the current study,a homogenous ultra-fine grained microstructure with average grain size of 1.0μm is achieved in the Mg-Zn-Ca-Mn alloy through the reduplicative equal channel angular pressing(ECAP)at 300℃,and the mechanical properties are remarkably improved,with room-temperature yield strength of 269.6 MPa and elongation of 22.7%.The twinning deformation results in a discontinuous recrystallization behavior in the initial stage of ECAP.With further deformation,the continuously dynamic recrystallization contributes to an obvious grain refinement effect.The activation of non-basal slip system leads to the formation of a unique basal texture,which is related to the elevated ECAP temperature and the decreased grain size.Both grain refinement and texture modification derived from ECAP process result in the increase of yield strength,while the cracked secondary phase particles are beneficial to the enhanced ductility,through reducing the stress concentration and hindering premature failure.

A comparison study of Ce/La and Ca microalloying on the bio-corrosion behaviors of extruded Mg-Zn alloys

The influences of Ca and Ce/La microalloying on the microstructure evolution and bio-corrosion resistances of extruded Mg-Zn alloys have been systematically investigated in the current study.Compared with single Ca or Ce/La addition,the Ca-Ce/La cooperative microalloying results in an outstanding grain refinement,because the fine secondary phase particles effectively hinder the recrystallized grain growth.The coarse Ca2Mg6Zn3 phases promote the formation of Ca3(PO4)2 or hydroxyapatite particles during the immersion process and accelerate the dissolution of the corrosion product film,which destroys its integrity and results in the deterioration of anti-corrosive performance.The Ce/La elements can be dispersed within the conventional Mg7Zn3 phases,which reduce the internal galvanic corrosion between Mg matrix and the secondary phases,leading to an obvious improvement of corrosion resistance.Therefore,the Ca-Ce/La cooperative microalloying achieves a homogenous fine-grained microstructure and improves the protective ability of surface film,which will pave a new avenue for the design of biomedical Mg alloys in the coming future.

NUMERICAL ANALYSIS OF HEAT TRANSFER DURING LASER CLADDING TO SYNTHESIZE TiCp/Al COMPOSITE

Based on the continuum model for binary solid-liquid phase change system, the math-ematic model to simulate the process of laser cladding in situ synthesis TiCp/Al composite on the surface of aluminum alloy was formulated. The additive source method was employed to treat with the heat release of synthetic reaction in powder mixture at certain temperatures, and also to solve the momentum and heat transfer caused by the relative movement between laser beam and the specimen. Two different types of driving forces for flow were considered in the model, i.e., the buoyancy force and the surface tension gradient at the laser pool surface. The three-dimensional transient temperature field simulation program was developed being based upon the commercial software PHOENICS. The calculated and observed fusion boundaries were compared and very good agreement was obtained.

Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging

In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechanisms of microstructure evolution and texture modification are systematically investigated.The activation of tension twinning occurs during the initial MDF stage,due to the coarse-grained structure of the as-cast alloy.With increasing MDF passes,the continuous dynamic recrystallization(CDRX)results in a fine equiaxed-grain structure.The typical non-basal texture is formed in the as-MDFed alloy for 6 passes,with the(0001)planes inclined 60°–70°to forged direction and 10°–20°to transverse direction,respectively.A good balance between the strength(~194.9 MPa)and ductility(~24.9%)has been achieved,which can be ascribed to the grain refinement,non-basal texture and fine precipitate particles.The damping capacity is remarkably improved after MDF processing,because the severe deformation increases the dislocation density,which effectively enlarges the sweep areas of mobile dislocations.