A novel X-ray source based on tiny target bremsstrahlung and a low energy tabletop synchrotron was developed in Japan. In this paper, its brilliance formula is deducted and compared with BEAMnrc (EGS4) simulation. The...A novel X-ray source based on tiny target bremsstrahlung and a low energy tabletop synchrotron was developed in Japan. In this paper, its brilliance formula is deducted and compared with BEAMnrc (EGS4) simulation. The brilliance of a tiny target bremsstrahlung X-ray prototype is discussed.展开更多
As the first satellite of the China national geophysical field observation series of stllite missions,the China Seismo--Electromagnetic Satellite(CSES)was designed upon an optimized CAST2000 platform for a sun synchro...As the first satellite of the China national geophysical field observation series of stllite missions,the China Seismo--Electromagnetic Satellite(CSES)was designed upon an optimized CAST2000 platform for a sun synchronous orbit.Onboard CSES,there are total eight types of scientific payloads including the Search-coil Magnetometer,Electric Field Detector,High Precision Magnetometer,GNSS Occupation Receiver,Plasma Analyzer,Langmuir Probe,Energetic Particle Detector Package,and a Three-band Transmitter to individually acquire the global eletromagnetic field,elec-tromagnetic waves,ionospheric plasma parameters as well as energetic particles.Up to now,CSES has been operating normally in orbit for 2 years.By using the various sensor data acquired by CSES,we have achieved scientfic research in the areas of the global geomagnetic field modeling,space weather,earthquake event analysis,the Lithosphere-Atmo-sphere-lonosphere coupling mechanism and so on..展开更多
The China Seismo-Electromagnetic Satellite(CSES) mission was proposed in 2003 and approved in 2013 after ten years' scientific and engineering demonstrations. To meet the requirement of scientific objectives, the ...The China Seismo-Electromagnetic Satellite(CSES) mission was proposed in 2003 and approved in 2013 after ten years' scientific and engineering demonstrations. To meet the requirement of scientific objectives, the satellite is designed to be in a sunsynchronous orbit with an altitude of 507 km and descending node time of 14:00 LT. The CSES satellite carries 8 instruments,including search-coil magnetometer(SCM), electric field detector(EFD), high precision magnetometer(HPM), GNSS occultation receiver(GOR), plasma analyzer package(PAP), langmuir probe(LAP), high energetic particle package(HEPP) and detector(HEPD), and tri-band beacon(TBB), among which HEPD is provided by Italian Space Agency. The CSES satellite was launched successfully on February 2, 2018, and is planned to operate for 5 years. The CSES mission is the first satellite in China to measure geophysical fields, which will have a lot of application prospects in the study of seismology, geophysics, space sciences, and so on.展开更多
The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a pro...The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a program to build an SRF Accelerating Unit. This unit contains a 9-cell 1.3 GHz superconducting cavity, a short cryomodule, a high power input coupler, a tuner and a low level RF system. This program also includes the SRF laboratory upgrade, which will permit the unit to be built and tested at IHEP. The unit will be used for the 1.3 GHz SRF system integration study, high power horizontal test and possible beam test in the future. In this paper, we report the recent R&D status of this program. The first large grain low-loss shape 9-cell superconducting RF cavity made by IHEP reached 20 MV/m in the first vertical test in July, 2010. The prototype tuner and low level RF (LLRF) system are under test. The high power input coupler and cryomodule are under fabrication. Several key SRF facilities for 9-cell cavity surface treatment and pre-tuning were successfully commissioned and are in operation.展开更多
Beijing Electron-Positron Collider Upgrade (BEPCII) adopts two 500 MHz superconducting cavities (SCCs) in each ring for higher accelerated gradient, higher Q and lower impedance (Wang et al. The proceedings of SRF'...Beijing Electron-Positron Collider Upgrade (BEPCII) adopts two 500 MHz superconducting cavities (SCCs) in each ring for higher accelerated gradient, higher Q and lower impedance (Wang et al. The proceedings of SRF'07). There's no spare cavity due to the limited time and funding during BEPCII construction. If any serious trouble happened on either one of the two cavities and could not be recovered in a short time, the operation of BEPCII facility will be affected. Therefore, since 2009 three spare cavities have been fabricated in China to ensure reliable operation, and two of them have been successfully vertically tested in January and July 2011. This paper will briefly present the manufacture, post-process and vertical test performance of the 500 MHz spare cavities.展开更多
文摘A novel X-ray source based on tiny target bremsstrahlung and a low energy tabletop synchrotron was developed in Japan. In this paper, its brilliance formula is deducted and compared with BEAMnrc (EGS4) simulation. The brilliance of a tiny target bremsstrahlung X-ray prototype is discussed.
基金This work made use of the data from CSES mission(ttp://www.leos.ac.cn/).a project funded by China National Space Adminitration(CNSA)and China Earth-quake Administration(CEA)This scientific application of CSES data in this paper is supported by the National Key R&D Pro-gram of China(Grant No.2018YFC 1503500)the APSCO Earthquake Research Project Phase II and ISSI-BJ(IT2019-33)project.
文摘As the first satellite of the China national geophysical field observation series of stllite missions,the China Seismo--Electromagnetic Satellite(CSES)was designed upon an optimized CAST2000 platform for a sun synchronous orbit.Onboard CSES,there are total eight types of scientific payloads including the Search-coil Magnetometer,Electric Field Detector,High Precision Magnetometer,GNSS Occupation Receiver,Plasma Analyzer,Langmuir Probe,Energetic Particle Detector Package,and a Three-band Transmitter to individually acquire the global eletromagnetic field,elec-tromagnetic waves,ionospheric plasma parameters as well as energetic particles.Up to now,CSES has been operating normally in orbit for 2 years.By using the various sensor data acquired by CSES,we have achieved scientfic research in the areas of the global geomagnetic field modeling,space weather,earthquake event analysis,the Lithosphere-Atmo-sphere-lonosphere coupling mechanism and so on..
基金supported by the State Key R&D Project(Grant No.2016YFE0122200)the Civil Aerospace Scientific Research Projects“Data calibration and validation for CSES”
文摘The China Seismo-Electromagnetic Satellite(CSES) mission was proposed in 2003 and approved in 2013 after ten years' scientific and engineering demonstrations. To meet the requirement of scientific objectives, the satellite is designed to be in a sunsynchronous orbit with an altitude of 507 km and descending node time of 14:00 LT. The CSES satellite carries 8 instruments,including search-coil magnetometer(SCM), electric field detector(EFD), high precision magnetometer(HPM), GNSS occultation receiver(GOR), plasma analyzer package(PAP), langmuir probe(LAP), high energetic particle package(HEPP) and detector(HEPD), and tri-band beacon(TBB), among which HEPD is provided by Italian Space Agency. The CSES satellite was launched successfully on February 2, 2018, and is planned to operate for 5 years. The CSES mission is the first satellite in China to measure geophysical fields, which will have a lot of application prospects in the study of seismology, geophysics, space sciences, and so on.
文摘The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC and future XFEL and ERL projects in China. With the aim to develop 1.3 GHz SRF technology, IHEP has started a program to build an SRF Accelerating Unit. This unit contains a 9-cell 1.3 GHz superconducting cavity, a short cryomodule, a high power input coupler, a tuner and a low level RF system. This program also includes the SRF laboratory upgrade, which will permit the unit to be built and tested at IHEP. The unit will be used for the 1.3 GHz SRF system integration study, high power horizontal test and possible beam test in the future. In this paper, we report the recent R&D status of this program. The first large grain low-loss shape 9-cell superconducting RF cavity made by IHEP reached 20 MV/m in the first vertical test in July, 2010. The prototype tuner and low level RF (LLRF) system are under test. The high power input coupler and cryomodule are under fabrication. Several key SRF facilities for 9-cell cavity surface treatment and pre-tuning were successfully commissioned and are in operation.
文摘Beijing Electron-Positron Collider Upgrade (BEPCII) adopts two 500 MHz superconducting cavities (SCCs) in each ring for higher accelerated gradient, higher Q and lower impedance (Wang et al. The proceedings of SRF'07). There's no spare cavity due to the limited time and funding during BEPCII construction. If any serious trouble happened on either one of the two cavities and could not be recovered in a short time, the operation of BEPCII facility will be affected. Therefore, since 2009 three spare cavities have been fabricated in China to ensure reliable operation, and two of them have been successfully vertically tested in January and July 2011. This paper will briefly present the manufacture, post-process and vertical test performance of the 500 MHz spare cavities.
