Titanium alloy has been a successful implant material owing to its excellent ratio of strength to weight, toughness, and bio-inert oxide surface. Significant progress has been made in improving the bioactivity of tita...Titanium alloy has been a successful implant material owing to its excellent ratio of strength to weight, toughness, and bio-inert oxide surface. Significant progress has been made in improving the bioactivity of titanium alloy by coating its oxide surface with calcium phosphates. In the present study, in situ coating was reported on Ti6Al4V(TC4) surface with calcium phosphate (Ca-P) bioceramics synthesized and synchronously cladded by laser beam. This coating was grown by first preplacing directly the raw powders, which contain 80% of CaHPO4 · 2H2O, 20% of CaCO3, and dram of rare earth (RE), on the TC4 surfaces, and then exposing the surfaces to the laser beam with a power density of 12. 73-15.27 MW · m^-2 and a scanning velocity of 10.5 m/s. The resultant coating was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis and Different-thermal Scanning (TG-DSC), and Energy Dispersive X-ray Detection (EDX). The results show that these laser ceramics include hydroxyapatite (HA), tricalcium phosphate (TCP), Ca2 P2 O7, and other Ca-P phases, and the interface between the coating and the TC4 substrate has tighter fixation, in which the chemical bonding is approved. These laser hybrid coatings are useful in enhancing the bioactivity of titanium alloy surfaces.展开更多
Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as ...Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.展开更多
Width spread is usually considered in hot rolling, nevertheless, it can be ignore in cold rolling. In order to control the crown and flatness better simultaneously and realize the decoupling of crown and flatness, the...Width spread is usually considered in hot rolling, nevertheless, it can be ignore in cold rolling. In order to control the crown and flatness better simultaneously and realize the decoupling of crown and flatness, the transverse displacement function of strip is defined and deduced. The factors that affects the width spread are analyzing with the function. According to the unchanged principle of volume before and after rolling, the flatness model which considers the width spread is deduced. Through the model, the transverse metal flowing of different stands and different thickness is analyzing, it is found that the width spread is biggest in cold rolling at the No. 1 stand because of the maximum thickness and reduction and the minimum deformation resistance. It gives a good foundation for the decoupling of crown and flatness.展开更多
基金Item Sponsored by National Natural Science Foundation of China(59571045)
文摘Titanium alloy has been a successful implant material owing to its excellent ratio of strength to weight, toughness, and bio-inert oxide surface. Significant progress has been made in improving the bioactivity of titanium alloy by coating its oxide surface with calcium phosphates. In the present study, in situ coating was reported on Ti6Al4V(TC4) surface with calcium phosphate (Ca-P) bioceramics synthesized and synchronously cladded by laser beam. This coating was grown by first preplacing directly the raw powders, which contain 80% of CaHPO4 · 2H2O, 20% of CaCO3, and dram of rare earth (RE), on the TC4 surfaces, and then exposing the surfaces to the laser beam with a power density of 12. 73-15.27 MW · m^-2 and a scanning velocity of 10.5 m/s. The resultant coating was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis and Different-thermal Scanning (TG-DSC), and Energy Dispersive X-ray Detection (EDX). The results show that these laser ceramics include hydroxyapatite (HA), tricalcium phosphate (TCP), Ca2 P2 O7, and other Ca-P phases, and the interface between the coating and the TC4 substrate has tighter fixation, in which the chemical bonding is approved. These laser hybrid coatings are useful in enhancing the bioactivity of titanium alloy surfaces.
基金Supported by Fundamental Research Funds for Central Universities(No.FRF-TP-12-067A)
文摘Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.
基金Supported by Beijing Higher Education Young Elite Teacher Project(No.YETP0369)
文摘Width spread is usually considered in hot rolling, nevertheless, it can be ignore in cold rolling. In order to control the crown and flatness better simultaneously and realize the decoupling of crown and flatness, the transverse displacement function of strip is defined and deduced. The factors that affects the width spread are analyzing with the function. According to the unchanged principle of volume before and after rolling, the flatness model which considers the width spread is deduced. Through the model, the transverse metal flowing of different stands and different thickness is analyzing, it is found that the width spread is biggest in cold rolling at the No. 1 stand because of the maximum thickness and reduction and the minimum deformation resistance. It gives a good foundation for the decoupling of crown and flatness.