High‐sensitivity distributed dynamic strain sensing by combining Rayleigh and Brillouin scattering

The phase-sensitive optical time-domain reflectometry(φ-OTDR)is a good candidate for distributed dynamic strain sensing,due to its high sensitivity and fast measurement,which has already been widely used in intrusion monitoring,geophysical exploration,etc.For the frequency scanning basedφ-OTDR,the phase change manifests itself as a shift of the intensity distribution.The correlation between the reference and measured spectra is employed for relative strain demodulation,which has imposed the continuous measurement for the absolute strain demodulation.Fortunately,the Brillouin optical time domain analysis(BOTDA)allows for the absolute strain demodulation with only one measurement.In this work,the combination of theφ-OTDR and BOTDA has been proposed and demonstrated by using the same set of frequency-scanning optical pulses,and the frequency-agile technique is also introduced for fast measurements.A 9.9 Hz vibration with a strain range of 500 nεhas been measured under two different absolute strains(296.7μεand 554.8με)by integrating the Rayleigh and Brillouin information.The sub-micro strain vibration is demonstrated by theφ-OTDR signal with a high sensitivity of 6.8 nε,while the absolute strain is measured by the BOTDA signal with an accuracy of 5.4με.The proposed sensor allows for dynamic absolute strain measurements with a high sensitivity,thus opening a door for new possibilities which are yet to be explored.

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Brillouin optical time-domain analysis(BOTDA)requires frequency mapping of the Brillouin spectrum to obtain environmental information(e.g.,temperature or strain)over the length of the sensing fiber,with the finite frequencysweeping time-limiting applications to only static or slowly varying strain or temperature environments.To solve this problem,we propose the use of an optical chirp chain probe wave to remove the requirement of frequency sweeping for the Brillouin spectrum,which enables distributed ultrafast strain measurement with a single pump pulse.The optical chirp chain is generated using a frequency-agile technique via a fast-frequency-changing microwave,which covers a larger frequency range around the Stokes frequency relative to the pump wave,so that a distributed Brillouin gain spectrum along the fiber is realized.Dynamic strain measurements for periodic mechanical vibration,mechanical shock,and a switch event are demonstrated at sampling rates of 25 kHz,2.5 MHz and 6.25 MHz,respectively.To the best of our knowledge,this is the first demonstration of distributed Brillouin strain sensing with a wide-dynamic range at a sampling rate of up to the MHz level.

Weak laser pulse signal amplification based on a fiber Brillouin amplifier

We propose a high-gain and frequency-selective amplifier for a weak optical signal based on stimulated Brillouin scattering in a single mode fiber. To be able to satisfy the needs of high gain and high signal-to-noise ratio laser pulse amplification, different fiber lengths and core diameters are used to fulfill this experiment. In the experiment, a 430 nW （peak power） pulsed signal is amplified by 70 dB with a signal-to-noise ratio of 14 dB. The small size, high gain, low cost, and low noise of the fiber Brillouin amplifier make it a promising weak signal amplification method for practical applications such as lidar.

Non-destructive and distributed measurement of optical fiber diameter with nanometer resolution based on coherent forward stimulated Brillouin scattering

Precise control and measurement of the optical fiber diameter are vital for a range of fields,such as ultra-high sensitivity sensing and high-speed optical communication.Nowadays,the measurement of fiber diameter relies on point measurement schemes such as microscopes,which suffer from a tradeoff between the resolution and field of view.Handling the fiber can irreversibly damage the fiber samples,especially when multi-point measurements are required.To overcome these problems,we have explored a novel technique in which the mechanical properties of fibers are reflected by forward stimulated Brillouin scattering(FSBS),from which the diameters can be demodulated via the acoustic dispersion relation.The distributed FSBS spectra with narrow linewidths were recorded via the optimized optomechanical time-domain analysis system using coherent FSBS,thereby achieving a spatial resolution of 1 m over a fiber length of tens of meters.We successfully obtained the diameter distribution of unjacketed test fibers with diameters of 125μm and 80μm.The diameter accuracy was verified by high-quality scanning electron microscope images.We achieved a diameter resolution of 3.9 nm,virtually independent of the diameter range.To the best of our knowledge,this is the first demonstration of non-destructive and distributed fiber diameter monitoring with nanometer resolution.

High-performance optical chirp chain BOTDA by using a pattern recognition algorithm and the differential pulse-width pair technique

Optical chirp chain Brillouin optical time-domain analysis(OCC-BOTDA) has the capabilities of fast measurement, high Brillouin threshold, and freedom from the nonlocal effect;at the same time, however, it also has problems introduced by transient stimulated Brillouin scattering. The influence of the transient interaction is reflected as the broadened asymmetric Brillouin spectrum, the ghost peak, and the frequency shift of the main peak. This introduces difficulty in computing the fiber Brillouin frequency shift with good measurement accuracy. Besides, the OCC modulation causes additional noise due to the uneven amplitude response for different frequency components. In this work, we propose a high-performance OCC-BOTDA using the principal component analysis(PCA) based pattern recognition algorithm and differential pulse-width pair(DPP) technique.After building the Brillouin spectrum database(i.e., all patterns), the fiber intrinsic Brillouin frequency shift can be recognized by the PCA algorithm from a nonstandard Brillouin spectrum profile, resulting in good measurement accuracy. Meanwhile, the DPP technique, subtracting between two Brillouin signals generated by two wide-width pump pulses, is utilized to reduce the OCC modulation noise and avoid the pulse self-phase modulation effect in long-range BOTDA sensing. In the experiment, a temperature measurement with 1.3 MHz measurement precision, 4 m spatial resolution, and 5 s measurement time is achieved over a 100 km single-mode fiber.

Hundred-Joule-level,nanosecond-pulse Nd:glass laser system with high spatiotemporal beam quality

A 100-J-level Nd:glass laser system in nanosecond-scale pulse width has been constructed to perform as a standard source of high-fluence-laser science experiments. The laser system, operating with typical pulse durations of 3–5 ns and beam diameter 60 mm, employs a sequence of successive rod amplifiers to achieve 100-J-level energy at 1053 nm at3 ns. The frequency conversion can provide energy of 50-J level at 351 nm. In addition to the high stability of the energy output, the most valuable of the laser system is the high spatiotemporal beam quality of the output, which contains the uniform square pulse waveform, the uniform flat-top spatial fluence distribution and the uniform flat-top wavefront.