期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
基于顶吹熔池熔炼工艺协同处理含铜污泥
1
作者 陈士朝 丁银贵 +3 位作者 张欣 管子豪 刘杰 朱彩飞 《有色金属(冶炼部分)》 CAS 北大核心 2023年第4期14-19,共6页
含铜污泥兼具环境危害和资源回收的双重属性,顶吹熔池熔炼工艺作为一种先进的火法冶炼工艺具有清洁高效等特点,在处理含铜污泥方面具有巨大的潜力。分析了含铜污泥的无害化和资源化技术现状,阐述了一种基于顶吹熔池熔炼技术的含铜危险... 含铜污泥兼具环境危害和资源回收的双重属性,顶吹熔池熔炼工艺作为一种先进的火法冶炼工艺具有清洁高效等特点,在处理含铜污泥方面具有巨大的潜力。分析了含铜污泥的无害化和资源化技术现状,阐述了一种基于顶吹熔池熔炼技术的含铜危险废物资源化利用工艺,该工艺生产效率较高,床能力达到30 t/(m^(2)·d),铜回收率大于98%,贵金属回收率大于95%。经过高温熔炼后铜等有价金属以粗铜的形式回收,熔渣水淬得到玻璃态炉渣,烟气经过“二次燃烧+回收余热+SNCR脱硝+急冷塔+石灰-活性炭喷射+布袋除尘+湿法脱硫+电除雾”工艺后达标排放,完全消除了含铜危险废物中重金属、持久有机污染物、SO_(2)、NO_(x)、卤化物等污染物。 展开更多
关键词 含铜污泥 顶吹熔池熔炼 资源化 无害化
下载PDF
废线路板富氧顶吹熔池熔炼实践 被引量:7
2
作者 周立杰 刘风华 +2 位作者 邹结富 丁银贵 陈士朝 《有色金属(冶炼部分)》 CAS 北大核心 2020年第9期35-38,共4页
介绍了废线路板富氧顶吹熔池熔炼技术在中节能(汕头)再生资源技术有限公司应用的情况,并对试生产中遇到的问题进行了分析,提出了对今后生产的改进意见。
关键词 废线路板 富氧顶吹 熔池熔炼 工业实践
下载PDF
大规模岩土爆破工程施工技术 被引量:7
3
作者 丁银贵 孙钰杰 《工程爆破》 CSCD 2020年第1期43-47,共5页
针对大规模、高强度岩土爆破工程难度大的特点,以舟山绿色石化基地8000万方岩土爆破工程为背景,通过采用等边三角形布孔斜线起爆网路、径向耦合-不耦合装药轴向孔底空气间隔定向卸压爆破装药技术、预留孔底保护层缓冲爆破等施工关键技术... 针对大规模、高强度岩土爆破工程难度大的特点,以舟山绿色石化基地8000万方岩土爆破工程为背景,通过采用等边三角形布孔斜线起爆网路、径向耦合-不耦合装药轴向孔底空气间隔定向卸压爆破装药技术、预留孔底保护层缓冲爆破等施工关键技术,提高了岩石破碎效果,大块率降低了10%~30%,爆破振速降低了15%~25%,同时也有效地保护了边坡和建基面岩体,对类似大规模岩土爆破工程的施工有一定的指导意义。 展开更多
关键词 大规模岩土爆破 施工技术 爆破参数 装药结构 起爆方式 爆破效果
下载PDF
废旧印刷电路板熔池熔炼技术节能降碳分析 被引量:3
4
作者 丁银贵 陈士朝 +3 位作者 黄文 赵海 朱彩飞 邹结富 《有色金属(冶炼部分)》 CAS 北大核心 2022年第9期77-82,共6页
分析了废旧印刷电路板主要种类的理化特性,结合顶吹熔池熔炼技术的优势,在控制入炉料热值为8.5~9.5 MJ/kg时,通过增加富氧空气使炉料中的有机质充分燃烧,基本能够实现自热熔炼。经过计算,粗铜能耗为220 kgce/t,与矿铜相比可节约2520 kgc... 分析了废旧印刷电路板主要种类的理化特性,结合顶吹熔池熔炼技术的优势,在控制入炉料热值为8.5~9.5 MJ/kg时,通过增加富氧空气使炉料中的有机质充分燃烧,基本能够实现自热熔炼。经过计算,粗铜能耗为220 kgce/t,与矿铜相比可节约2520 kgce/t,减少CO_(2)排放6.60 t/t,与再生铜相比节约170 kgce/t,减少CO_(2)排放459 kg/t。废旧印刷电路板熔池熔炼技术示范工程实际生产过程中,维持进料时间在2.5~3.0 h时,除停炉放渣及停炉期间需补加燃料外,正常生产时,超过80%生产时间能够实现自热熔炼。 展开更多
关键词 废旧印刷电路板 熔池熔炼 热值 节能降碳
下载PDF
毗连海岸岩礁深孔爆破设计与施工技术 被引量:1
5
作者 王林桂 丁银贵 +2 位作者 张中雷 孙钰杰 廖敏敏 《工程爆破》 CSCD 2019年第2期31-37,共7页
为了解决毗连海岸岩礁深孔爆破因地形变化大、水深较浅,施工船舶难以进入,且受潮汐影响大,候潮作业施工效率低的问题,采用一种新的处理毗连海岸岩礁爆破施工方法,即利用简易围堰—填沙成陆的方式将近岸岩礁填筑成陆地,将水下爆破转为露... 为了解决毗连海岸岩礁深孔爆破因地形变化大、水深较浅,施工船舶难以进入,且受潮汐影响大,候潮作业施工效率低的问题,采用一种新的处理毗连海岸岩礁爆破施工方法,即利用简易围堰—填沙成陆的方式将近岸岩礁填筑成陆地,将水下爆破转为露天深孔爆破。在创造的陆地施工工作面上进行钻孔、插管、装药、爆破,取得了良好的爆破效果,爆堆整体隆起,最高达3 m,爆区前排紧邻围堰侧往前推出约4~5 m,后排紧邻山体侧往前推出约1~2 m。运用这种先成陆后实施岩礁深孔爆破的方法,规避了风、浪、潮汐、水流、水深等因素对施工的影响,极大地减少了安全隐患,同时利用陆地大型设备的优势,也提高了施工效率、降低了施工成本。 展开更多
关键词 毗连海岸 岩礁 深孔爆破 设计与施工
下载PDF
Comprehensive Utilization of Paigeite Ore Using Iron Nugget Making Process 被引量:18
6
作者 ding yin-gui WANG Jing-song +2 位作者 WANG Guang MA Sai XUE Qing-guo 《Journal of Iron and Steel Research(International)》 SCIE CAS CSCD 2012年第6期9-13,共5页
The feasibility of paigeite ore treatment with iron nugget making process is proved. The isothermal reduc- tion experiments at laboratory scale were carried out, using carbon bearing pellets which were made of boron c... The feasibility of paigeite ore treatment with iron nugget making process is proved. The isothermal reduc- tion experiments at laboratory scale were carried out, using carbon bearing pellets which were made of boron contai- ning iron concentrate and pulverized coal mainly, from 1 623 to 1 723 K with different heating time. The results indi- cated that iron nugget making process depends mainly on heating time and temperature. And the iron nugget and slag can separate in a clean manner at 1 673 K for 15 min. For the iron nugget, the C content is 3.57% (mass percent) and B is 0. 065~ (mass percent). The B203 content of slag is 20.01~/00, and the boron was concentrated into one phase which is identified as suanite (Mg2BaOs) during the solidification. With an extraction ratio of 80~ under the atmospheric conditions, the activity of boron in slag is good. The boron-rich slag can be used to extract boric or boric acid and alleviate the shortage of boron resource. Through series of calculation and analysis related, it can be conclu- ded that the recovery ratio of Fe and boron are about 98% and 97% respectively. The results show that this method is feasible and effective on the utilization of paigeite ore. 展开更多
关键词 boron containing iron concentrate carbon bearing pellets iron nugget boron-rich slag
原文传递
Reduction Characteristics and Kinetics of Bayanobo Complex Iron Ore Carbon Bearing Pellets 被引量:8
7
作者 ding yin-gui WANG Jing-song +2 位作者 SHE Xue-feng WANG Guang XUE Qing-guo 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2013年第5期28-33,共6页
The kinetics of isothermal reduction of the carbon bearing pellets, which were mainly composed of Bayanobo complex iron ore and pulverized coal, was investigated by thermogravimetry at the temperature of 1 273-1 673 K... The kinetics of isothermal reduction of the carbon bearing pellets, which were mainly composed of Bayanobo complex iron ore and pulverized coal, was investigated by thermogravimetry at the temperature of 1 273-1 673 K. The effects of xC/xO and the atmospheres on the extent of reduction also were investigated. The results indicate that the fractional reaction increased proportionally with temperature increasing and heating temperature is the significant influence factor to the reaction of carbon bearing pellets. The optimum xC/xO is 1.2 and the effect of atmosphere on the reduction of iron oxides is almost negligible. The results can be interpreted that the reaction was initially controlled by a mixed controlled mechanism of carbon gasification and interface chemical reaction, and in the later stage, interface chemical reaction became the rate-controlling step. Apparent activation energy values of reduction at different levels of fractional reaction were calculated. Before F (fraction of reaction)=0.5, the apparent activation energy ranges from 66.39 to 75.64 kJ/mol, while after F=0.5, the apparent activation energy is 80.98 to 85.37 kJ/mol. 展开更多
关键词 Bayanobo complex iron ore carbon bearing pellet thermogravimetry apparent activation energy
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部