Three-dimensional crystal plasticity and HR-EBSD analysis of the local stress-strain fields induced during twin propagation and thickening in magnesium alloys

Present work focuses on analysis of the stress and strain fields inside and around the individual {10–12} twin in magnesium alloy. The 3D crystal plasticity model represents twin as an ellipsoidal inclusion surrounded by the matrix. Five different twin thicknesses and three different lateral twin lengths are used for stress/strain analysis. The simulations are complemented with experimental observations using high-resolution electron backscattered diffraction. The simulations and experiments show a similar distribution of the shear stress and the spatial activity of individual slip systems(basal, prismatic, pyramidal). Plasticity induced inside the twin is dominantly caused by the prismatic dislocations slip and does not influence twin back stress which is identical to pure elastic twin. The twin with larger lateral dimension requires lower equilibrium stress which suggests anisotropic twin propagation and increased thickness of such twins. The lateral twin propagation is mostly influenced by prismatic and pyramidal slip in the twin vicinity. The twin thickness can reach a maximal level that is driven by the critical resolved shear stress values for dislocation slip with the significant influence of basal slip.

Hot deformation of Mg-Y-Zn alloy with a low content of the LPSO phase studied by in-situ synchrotron radiation diffraction

The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffraction technique.Tests were conducted at temperatures between room temperature and 350℃.Detailed microstructure investigation was provided by scanning electron microscopy,particularly the backscattered electron imaging and electron backscatter diffraction technique.The results show that twinning lost its dominance and kinking of the LPSO phase became more pronounced with increasing deformation temperature.No cracks of the LPSO phase and no debonding r at the interface between the LPSO phase and the Mg matrix were observed at temperatures above 200℃.At 350℃,the LPSO phase lost its strengthening effect and the deformation of the alloy was mainly realized by the dynamic recrystallization of the Mg matrix.

In-situ study of the microstructure evolution during tension of a Mg-Y-Zn-Al alloy processed by rapidly solidified ribbon consolidation technique

Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stacking faults forming cluster arranged layers(CALs)and nanoplates(CANaPs),or complete long period stacking ordered(LPSO)phase.In order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)alloy.For uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 h.The heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile loading.On the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical strength.The maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation maps.It was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CANaPs/LPSO plates.