A 4 Gbps transmitter for a 12-bit 250 MSPS pipelined ADCs is presented. A low power current mode （CM） output driver with reverse scaling technique is proposed. A high speed, low power combined serializer is implemen...A 4 Gbps transmitter for a 12-bit 250 MSPS pipelined ADCs is presented. A low power current mode （CM） output driver with reverse scaling technique is proposed. A high speed, low power combined serializer is implemented to convert 12 bit parallel data into a serial data stream. The whole transmitter is used in a 12-bit 250 MSPS pipelined ADC for the digital output buffer and fabricated in 180 nm 1.8 V 1PSM CMOS technology. Test results show that the transmitter provides an eye height greater than 800 mV for data rates of both 2 Gbps and 4 Gbps, the 12-bit 250 MSPS ADC achieves the SNR of 69.92 dBFS and SFDR of 81.17 dB with 20.1 MHz input at full sampling speed. The ADC with the 4 Gbps transmitter consumes the power consumption of 395 mW, where the power consumption of transmitter is 75 mW. The ADC occupies an area of 2.5 × 3.2 mm2, where the active area of the transmitter block is 0.5× 1.2 mm2.展开更多
基金supported by the National Science Foundation of China(No.61474092)Key Project of Natural Science of Anhui Provincial Department of Education(No.KJ2017A396)
文摘A 4 Gbps transmitter for a 12-bit 250 MSPS pipelined ADCs is presented. A low power current mode （CM） output driver with reverse scaling technique is proposed. A high speed, low power combined serializer is implemented to convert 12 bit parallel data into a serial data stream. The whole transmitter is used in a 12-bit 250 MSPS pipelined ADC for the digital output buffer and fabricated in 180 nm 1.8 V 1PSM CMOS technology. Test results show that the transmitter provides an eye height greater than 800 mV for data rates of both 2 Gbps and 4 Gbps, the 12-bit 250 MSPS ADC achieves the SNR of 69.92 dBFS and SFDR of 81.17 dB with 20.1 MHz input at full sampling speed. The ADC with the 4 Gbps transmitter consumes the power consumption of 395 mW, where the power consumption of transmitter is 75 mW. The ADC occupies an area of 2.5 × 3.2 mm2, where the active area of the transmitter block is 0.5× 1.2 mm2.
