Micromechanical analysis on tensile properties prediction of discontinuous randomized zalacca fibre/high-density polyethylene composites under critical fibre length

In this research,the tensile properties'performance of compression moulded discontinuous randomized zalacca fibre/high-density polyethylene under critical fibre length was analysed by means of experimental method and micromechanical models.These investigations were used to verify the tensile properties models toward the effect of fibre length and volume fraction on the composites.The experimental results showed that the tensile properties of composites had significantly increased due to the enhancement of fibre length.On the contrary,a decline in the tensile properties was observed with the increase of volume fraction.A comparison was made between the available experimental results and the performances of Tsai-Pagano,Christensen and Cox-Krechel models in their prediction of composites elastic modulus.The results showed that the consideration of fibre's elastic anisotropy in the Cox-Krenchel model had yielded a good prediction of the composites modulus,nevertheless the models could not accurately predict the composites modulus for fibre length study.

Investigation of Agave cantala-based composite fibers as prosthetic socket materials accounting for a variety of alkali and microcrystalline cellulose treatments

This study was aimed to determine the mechanical strength of composites made from Agave cantala with an unsaturated polyester matrix and microcrystalline cellulose.Cantala fiber(CF)was treated with 6%Na OH with immersion times of 0 h(UF),3 h(AK3),6 h(AK6),9 h(AK9),and12 h(AK12).Thermogravimetric analysis(TGA)analysis shows that treated CF has higher thermal stability than CF without treatment.Cantala fiber was tested by X-ray diffraction.After alkali treatment with a 6-h soaking,it had a crystallinity index of 73.65%.Scanning electron microscopy(SEM)showed that the fibers were cleaner after alkali treatment because hemicellulose,wax,and other impurities were removed.Examination of the contact angle and surface energy showed that treated CF has smaller contact angles and greater surface energy.