期刊文献+
共找到18篇文章
< 1 >
每页显示 20 50 100
基于声信号递归Hilbert变换的轴承故障诊断研究
1
作者 郝旺身 李继康 +2 位作者 董辛旻 娄永威 徐平 《机床与液压》 北大核心 2024年第4期195-199,共5页
轴承缺陷检测与损伤程度检测一直是旋转机械领域内非常重视的问题,虽然目前针对振动信号的研究已经取得相当好的结果,但是对于难以安装振动传感器的情况,诊断效果仍需改进。针对强背景噪声下故障轴承产生的声音,提出一种基于递归Hilber... 轴承缺陷检测与损伤程度检测一直是旋转机械领域内非常重视的问题,虽然目前针对振动信号的研究已经取得相当好的结果,但是对于难以安装振动传感器的情况,诊断效果仍需改进。针对强背景噪声下故障轴承产生的声音,提出一种基于递归Hilbert变换和一维卷积神经网络的诊断方法来提取抽象特征并进行模式识别。卷积神经网络结构中引入了全局平均池化层来加速网络的运行。最后,通过数据集验证了所提方法的有效性,与其他常用分类方法进行对比,验证了该方法的优越性。结果表明:所提算法不仅能够准确识别轴承的损伤部位,而且能够准确区分部件的损伤程度。 展开更多
关键词 声学检测 损伤检测 递归Hilbert变换 深度学习 卷积神经网络
下载PDF
基于声振融合的二次EWT-CNN刀具磨损监测
2
作者 郝旺身 娄永威 +2 位作者 董辛旻 李继康 娄本池 《组合机床与自动化加工技术》 北大核心 2024年第2期8-12,共5页
为了实现加工过程中对刀具磨损状态的监测,提出一种基于协同过滤融合的方法。首先,对工作刀具振动信号和声音信号进行特征相关性分析后进行数据层融合;然后,将得到的声振融合信号进行二次经验小波变换(EWT)后去噪重构;最后,将重构信号... 为了实现加工过程中对刀具磨损状态的监测,提出一种基于协同过滤融合的方法。首先,对工作刀具振动信号和声音信号进行特征相关性分析后进行数据层融合;然后,将得到的声振融合信号进行二次经验小波变换(EWT)后去噪重构;最后,将重构信号进行信号增强并送入CNN实现特征提取及刀具故障识别。通过对不同故障类型的麻花钻头进行故障识别实验,在声音、振动以及声振融合信号和不同信号去噪重构方法的对比下,该方法对不同故障类型的钻头作出了98.96%的高识别率。验证了所提方法在刀具故障识别方面的优越性。 展开更多
关键词 声振融合信号 刀具磨损 故障识别 经验小波变换 卷积神经网络
下载PDF
基于特征选择与Transformer的涡扇发动机剩余使用寿命预测
3
作者 刘耕鑫 董辛旻 +1 位作者 张瑞博 陈阳 《机床与液压》 北大核心 2024年第7期208-213,共6页
针对传统剩余使用寿命预测模型难以解决长时依赖问题以及不同特征组合对模型预测精度影响大的问题,提出一种基于特征选择与Transformer的剩余使用寿命预测模型。首先利用以互信息为理论基础的最大相关最小冗余特征选择算法,捕获特征与... 针对传统剩余使用寿命预测模型难以解决长时依赖问题以及不同特征组合对模型预测精度影响大的问题,提出一种基于特征选择与Transformer的剩余使用寿命预测模型。首先利用以互信息为理论基础的最大相关最小冗余特征选择算法,捕获特征与标签、特征与特征的关系,得到最佳特征组合;然后以Transformer的编码器为主体并加入门控卷积单元组成预测模型,使模型可以充分捕捉全局信息且提高运算效率的基础上也更加注重局部信息;通过网格搜索与粒子群算法确定模型超参数。最后将最优特征组合的变量数据输入模型实现涡扇发动机剩余使用寿命预测。利用此方法在C-MAPSS数据集进行验证,并进行对比实验,结果表明预测误差与模型效率均有一定改进。 展开更多
关键词 剩余使用寿命 最大相关最小冗余 特征选择 互信息 Transformer模型
下载PDF
机械工程控制基础课程思政探索
4
作者 雷文平 郝旺身 +2 位作者 董辛旻 陈磊 王丽雅 《科教文汇》 2023年第12期155-158,共4页
为了贯彻课程思政的创新教育理念,将课程思政融入机械工程控制基础课程教学,以立德树人为根本育人目标,以提升学生“思政素养”“科学素养”和“文化素养”为课程的思政目标,对课程的思政元素进行了深入的挖掘和提炼,通过提升教学设计... 为了贯彻课程思政的创新教育理念,将课程思政融入机械工程控制基础课程教学,以立德树人为根本育人目标,以提升学生“思政素养”“科学素养”和“文化素养”为课程的思政目标,对课程的思政元素进行了深入的挖掘和提炼,通过提升教学设计能力、创新课堂教学方法、扩展教学实践场域等多重手段,实现专业育人与育才的统一。 展开更多
关键词 机械工程控制基础 课程思政 思政素养 科学素养 文化素养
下载PDF
木犀草素通过逆转OPCML基因甲基化抑制乳腺癌MDA-MB-231细胞增殖 被引量:11
5
作者 董欣敏 郑媞 +3 位作者 张子英 白喜玲 李华 张剑 《南方医科大学学报》 CAS CSCD 北大核心 2020年第4期550-555,共6页
目的观察木犀草素对MDA-MB-231乳腺癌细胞增殖以及对OPCML基因表达的影响。方法体外培养MDA-MB-231细胞,加入终浓度为0(对照组)以及5、10和20μmol/L的木犀草素处理孵育24 h或48 h后,MTT法检测细胞的增殖,流式细胞术检测细胞凋亡;并提... 目的观察木犀草素对MDA-MB-231乳腺癌细胞增殖以及对OPCML基因表达的影响。方法体外培养MDA-MB-231细胞,加入终浓度为0(对照组)以及5、10和20μmol/L的木犀草素处理孵育24 h或48 h后,MTT法检测细胞的增殖,流式细胞术检测细胞凋亡;并提取胞内总mRNA和蛋白,以实时定量PCR和Western blot检测OPCML的mRNA及蛋白变化;同时采用甲基化特异性PCR(MSP)检测OPCML启动子区域的甲基化水平,并分析细胞内甲基化酶的活性。结果 MTT结果显示,MDAMB-231细胞经5、10以及20μmol/L木犀草素孵育24 h后,随着浓度的递增,细胞活性逐渐降低(P<0.05)。流式细胞术结果也显示,不同浓度木犀草素可不同程度诱导MDA-MB-231细胞凋亡(P<0.05)。此外,木犀草素能以剂量依赖性方式诱导MDAMB-231细胞表达OPCML mRNA和蛋白(P<0.05)。MSP结果也显示,木犀草素可显著下调OPCML启动子的甲基化状态,上调非甲基化OPCML的水平,并能降低细胞内甲基化酶的活性(P<0.05)。结论木犀草素可抑制MDA-MB-231乳腺癌细胞的增殖,其机制可能与影响OPCML基因的表达以及甲基化水平有关。 展开更多
关键词 木犀草素 乳腺癌 OPCML 甲基化
下载PDF
基于Huber的鲁棒高阶容积卡尔曼滤波算法 被引量:5
6
作者 秦康 董新民 陈勇 《计算机工程与应用》 CSCD 北大核心 2017年第7期21-29,53,共10页
为提高随机变量非高斯分布时高阶容积卡尔曼滤波(High-degree Cubature Kalman Filter,HCKF)算法的鲁棒性,提出了一种基于Huber方法的鲁棒高阶容积卡尔曼滤波算法。从近似贝叶斯估计角度解释了Huber方法作用于卡尔曼滤波算法的本质是对... 为提高随机变量非高斯分布时高阶容积卡尔曼滤波(High-degree Cubature Kalman Filter,HCKF)算法的鲁棒性,提出了一种基于Huber方法的鲁棒高阶容积卡尔曼滤波算法。从近似贝叶斯估计角度解释了Huber方法作用于卡尔曼滤波算法的本质是对新息进行截断平均,通过在现有滤波框架内利用Huber方法对观测量进行预处理,并将处理后的观测量进行标准的HCKF量测更新,实现了HCKF算法的鲁棒化。所提算法无需通过统计线性回归模型对系统的非线性量测模型进行近似,高阶容积变换的优势得到充分利用,从而在保持鲁棒性的前提下提高了算法的滤波精度。单变量非平稳增长模型和再入飞行器目标跟踪问题验证了该算法在鲁棒性和滤波精度方面的优势。 展开更多
关键词 Huber方法 高斯滤波 高阶容积准则 鲁棒性 滤波精度
下载PDF
基于空间平滑差分的鲁棒自适应波束形成 被引量:3
7
作者 郝旺身 刘雨曦 +4 位作者 冀科伟 张二亮 董辛旻 李继康 赵露露 《电子测量技术》 北大核心 2022年第9期50-55,共6页
针对当采样协方差矩阵中包含期望信号时,模型失配会使MVDR自适应波束形成算法性能大幅下降的问题,本文提出一种基于空间平滑差分算法(SSDA)的鲁棒自适应波束形成算法。该算法首先通过空间平滑差分算法获得源数目先验知识,再对MVDR空间... 针对当采样协方差矩阵中包含期望信号时,模型失配会使MVDR自适应波束形成算法性能大幅下降的问题,本文提出一种基于空间平滑差分算法(SSDA)的鲁棒自适应波束形成算法。该算法首先通过空间平滑差分算法获得源数目先验知识,再对MVDR空间功率谱进行波峰搜索得到期望信号,最后再从采样协方差矩阵中去除期望信号协方差矩阵。仿真结果表明,在高信噪比输入的情况下,改进后的算法在去除期望信号后其输出信干噪比有了很大提升,比MVDR算法提高了2~3倍。 展开更多
关键词 鲁棒自适应波束形成 空间平滑差分 源数估计 协方差矩阵重构
下载PDF
Pax-8在腹膜恶性间皮瘤及高分化乳头状间皮瘤中异常表达的免疫组织化学分析
8
作者 李杜娟 康红 +2 位作者 董新敏 黄珊珊 连立飞 《中国组织化学与细胞化学杂志》 CAS CSCD 2021年第3期265-270,共6页
目的观察配对盒基因8抗原(paired box gene 8,Pax-8)在腹膜恶性间皮瘤(malignant peritonealmesothelioma,MPM)、高分化乳头状间皮瘤(well-differentiated papillary mesothelioma,WDPM)中的表达,探讨Pax-8在MPM、WDPM与卵巢浆液性肿瘤(... 目的观察配对盒基因8抗原(paired box gene 8,Pax-8)在腹膜恶性间皮瘤(malignant peritonealmesothelioma,MPM)、高分化乳头状间皮瘤(well-differentiated papillary mesothelioma,WDPM)中的表达,探讨Pax-8在MPM、WDPM与卵巢浆液性肿瘤(ovarian serous tumors,OST)鉴别中的诊断价值。方法收集MPM病例32例,WDPM 12例,良性多囊性间皮瘤6,腺瘤样瘤15例,反应性间皮12例,通过免疫组织化学方法检测这些病变中Pax-8的表达,并分析临床病理学特点。结果5例MPM(15.6%,5/32)表达Pax-8,3例弥漫性中-强阳性,2例局灶性弱-中度阳性;7例WDPM(58.3%,7/12)表达Pax-8,5例弥漫性中-强阳性,2例局灶性弱-中度阳性;1例良性多囊性间皮瘤(16.7%,1/6)Pax-8表达呈局灶性弱-中度阳性;15例腺瘤样瘤均不表达Pax-8;6例反应性间皮(50%,6/12)表达Pax-8,3例弥漫性中-强阳性,3例局灶性弱-中度阳性。结论Pax-8对MPM、WDPM与OST鉴别诊断的价值有限,尤其对于WDPM与交界性或低级别浆液性肿瘤的鉴别不可靠,需要多个标记联合使用,以降低误诊的风险。 展开更多
关键词 恶性间皮瘤 腹膜 Pax-8 高分化乳头状间皮瘤 免疫组织化学
下载PDF
飞控系统及其故障的非线性模型建立与仿真平台开发
9
作者 李永林 董新民 +1 位作者 王瑛 张婷 《机床与液压》 北大核心 2018年第7期109-113,共5页
针对飞控系统进行动态特性和故障特性分析;基于模型故障检测方法研究的需要,开展了飞控系统及其故障的非线性建模与仿真平台开发的研究。定义了典型的飞控系统结构,建立了舵机、力综合臂、传感器和作动器的数学模型,进行了飞控系统各部... 针对飞控系统进行动态特性和故障特性分析;基于模型故障检测方法研究的需要,开展了飞控系统及其故障的非线性建模与仿真平台开发的研究。定义了典型的飞控系统结构,建立了舵机、力综合臂、传感器和作动器的数学模型,进行了飞控系统各部分典型故障模式分析,建立了飞控系统各部分故障的数学模型。以MATLAB/Simulink为工具开发了飞控系统及其故障的仿真平台,可方便地完成系统及其故障的动态特性仿真。仿真试验验证了飞控系统及其故障数学模型和仿真试验平台的合理性。 展开更多
关键词 飞控系统 故障 建模 SIMULINK 仿真平台
下载PDF
基于FR-4的压电能量采集器参数研究
10
作者 郝旺身 李伟 +3 位作者 刘雨曦 冀科伟 董辛旻 李晨阳 《压电与声光》 CAS 北大核心 2021年第2期231-235,共5页
为了进一步研究非线性材料基底对于压电能量采集器输出性能的影响,该文对以FR-4绝缘板为基底的悬臂梁式压电能量采集器的结构参数进行优化研究。在正交实验和单因素实验方案的指导下,通过仿真及实验验证得出各参数对采集器输出影响的一... 为了进一步研究非线性材料基底对于压电能量采集器输出性能的影响,该文对以FR-4绝缘板为基底的悬臂梁式压电能量采集器的结构参数进行优化研究。在正交实验和单因素实验方案的指导下,通过仿真及实验验证得出各参数对采集器输出影响的一般规律。结果表明,基底厚度对结构固有频率影响最大,贡献率达到了91.98%。悬臂梁长L、厚S和宽H改变时,输出响应曲线呈现出非线性特性;而末端质量m与输出性能间则存在近似线性的关系。实验中,当L=80 mm,S=13 mm,H=1 mm,m=1 g时,输出功率可达37μW。通过方差分析结果表明,末端质量对输出性能的影响最大,梁宽对输出性能的影响次之,梁长对输出性能的影响最小。 展开更多
关键词 压电悬臂梁 FR-4 聚偏氟乙烯(PVDF) 输出响应 参数优化
下载PDF
基于联合评价的微滴检测芯片微通道结构优化
11
作者 董辛旻 张洪溧 +2 位作者 徐刚 梁帅 余仁辉 《郑州大学学报(工学版)》 CAS 北大核心 2022年第4期47-52,共6页
为探究通过检测仪器间隔时间短、连续相试剂消耗量小、单列间距小的微滴检测芯片,建立了微通道仿真几何模型,并进行模型有效性验证实验。利用Fluent仿真软件,对正交试验中16种不同结构尺寸的微滴检测芯片进行数值模拟,将主观赋权法与客... 为探究通过检测仪器间隔时间短、连续相试剂消耗量小、单列间距小的微滴检测芯片,建立了微通道仿真几何模型,并进行模型有效性验证实验。利用Fluent仿真软件,对正交试验中16种不同结构尺寸的微滴检测芯片进行数值模拟,将主观赋权法与客观赋权法相结合,形成组合赋权法对评价指标赋权,采用理想解法(TOPSIS)、秩和比法(RSR)对数值模拟结果进行联合评价,得出16种结构的优劣次序。评价结果表明,连续相通道宽度为80μm、离散相通道宽度为90μm、两相流体交汇出口宽度为100μm、通道深度为50μm的结构最优,可以得到微滴序列间距小、单个微滴检测间隔时间较短、连续相液体消耗较小的经济性较优的微滴检测芯片。 展开更多
关键词 微滴检测芯片 通道结构 组合赋权 秩和比法 联合评价
下载PDF
SGMD-MOMEDA滚动轴承故障特征提取方法研究
12
作者 曹亚磊 杜应军 +3 位作者 韦广 董辛旻 高丽鹏 刘雨曦 《机械强度》 CAS CSCD 北大核心 2022年第6期1279-1285,共7页
针对滚动轴承的振动信号因非线性、非平稳且信噪比低而造成故障特征难以提取的问题,基于辛几何模态分解(Symplectic Geometry Mode Decomposition, SGMD)和多点最优最小熵解卷积调整(Multipoint Optimal Minimum Entropy Deconvolution ... 针对滚动轴承的振动信号因非线性、非平稳且信噪比低而造成故障特征难以提取的问题,基于辛几何模态分解(Symplectic Geometry Mode Decomposition, SGMD)和多点最优最小熵解卷积调整(Multipoint Optimal Minimum Entropy Deconvolution Adjusted, MOMEDA)理论,提出了SGMD-MOMEDA故障提取方法。首先,使用SGMD对故障信号进行分解,得到一列的辛几何分量(Symplectic Geometry Components, SGC);其次,依据相关性准则选取SGC进行信号重构,并确定MOMEDA分解参数;最后,使用MOMEDA方法对重构信号进行处理以提高信噪比,并利用包络谱分析对处理后的信号提取故障特征。仿真和实验结果表明,该方法能够准确地提取滚动轴承的故障频率,且与经验模态分解(Empirical Mode Decomposition, EMD)方法的对比结果显示了SGMD方法作为预处理其分解结果更加准确,在故障诊断领域具有较大的应用价值。 展开更多
关键词 辛几何模态分解 辛几何分量 多点最优最小熵解卷积调整 特征提取 滚动轴承故障诊断
下载PDF
Dynamic modeling of a hose-drogue aerial refueling system and integral sliding mode backstepping control for the hose whipping phenomenon 被引量:19
13
作者 Wang Haitao dong xinmin +1 位作者 Xue Jianping Liu Jiaolong 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2014年第4期930-946,共17页
Dynamic modeling of a hose-drogue aerial refueling system(HDARS) and an integral sliding mode backstepping controller design for the hose whipping phenomenon(HWP) during probe-drogue coupling are studied. Firstly,... Dynamic modeling of a hose-drogue aerial refueling system(HDARS) and an integral sliding mode backstepping controller design for the hose whipping phenomenon(HWP) during probe-drogue coupling are studied. Firstly, a dynamic model of the variable-length hose-drogue assembly is built for the sake of exploiting suppression methods for the whipping phenomenon.Based on the lumped parameter method, the hose is modeled by a series of variable-length links connected with frictionless joints. A set of iterative equations of the hose's three-dimensional motion is derived subject to hose reeling in/out, tanker motion, gravity, and aerodynamic loads accounting for the effects of steady wind, atmospheric turbulence, and tanker wake. Secondly,relying on a permanent magnet synchronous motor and high-precision position sensors, a new active control strategy for the HWP on the basis of the relative position between the tanker and the receiver is proposed. Considering the strict-feedback configuration of the permanent magnet synchronous motor, a rotor position control law based on the backstepping method is designed to insure global stability. An integral of the rotor position error and an exponential sliding mode reaching law of the current errors are applied to enhance control accuracy and robustness. Finally,the simulation results show the effectiveness of the proposed model and control laws. 展开更多
关键词 Aerial refueling BACKSTEPPING Hose drogue assembly Permanent magnet synchronous motor Sliding mode Whipping phenomenon
原文传递
Real-time drogue recognition and 3D locating for UAV autonomous aerial refueling based on monocular machine vision 被引量:15
14
作者 Wang Xufeng Kong Xingwei +2 位作者 Zhi Jianhui Chen Yong dong xinmin 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2015年第6期1667-1675,共9页
Drogue recognition and 3D locating is a key problem during the docking phase of the autonomous aerial refueling (AAR). To solve this problem, a novel and effective method based on monocular vision is presented in th... Drogue recognition and 3D locating is a key problem during the docking phase of the autonomous aerial refueling (AAR). To solve this problem, a novel and effective method based on monocular vision is presented in this paper. Firstly, by employing computer vision with red-ring-shape feature, a drogue detection and recognition algorithm is proposed to guarantee safety and ensure the robustness to the drogue diversity and the changes in environmental condi- tions, without using a set of infrared light emitting diodes (LEDs) on the parachute part of the dro- gue. Secondly, considering camera lens distortion, a monocular vision measurement algorithm for drogue 3D locating is designed to ensure the accuracy and real-time performance of the system, with the drogue attitude provided. Finally, experiments are conducted to demonstrate the effective- ness of the proposed method. Experimental results show the performances of the entire system in contrast with other methods, which validates that the proposed method can recognize and locate the drogue three dimensionally, rapidly and precisely. 展开更多
关键词 Autonomous aerial refueling Drogue 3D locating Drogue attitudemeasurement Drogue detection Drogue recognition Monocular machine vision
原文传递
Drogue detection for autonomous aerial refueling based on convolutional neural networks 被引量:10
15
作者 Wang Xufeng dong xinmin +2 位作者 Kong Xingwei Li Jianmin Zhang Bo 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2017年第1期380-390,共11页
Drogue detection is a fundamental issue during the close docking phase of autonomous aerial refueling(AAR). To cope with this issue, a novel and effective method based on deep learning with convolutional neural netw... Drogue detection is a fundamental issue during the close docking phase of autonomous aerial refueling(AAR). To cope with this issue, a novel and effective method based on deep learning with convolutional neural networks(CNNs) is proposed. In order to ensure its robustness and wide application, a deep learning dataset of images was prepared by utilizing real data of ‘‘Probe and Drogue" aerial refueling, which contains diverse drogues in various environmental conditions without artificial features placed on the drogues. By employing deep learning ideas and graphics processing units(GPUs), a model for drogue detection using a Caffe deep learning framework with CNNs was designed to ensure the method's accuracy and real-time performance. Experiments were conducted to demonstrate the effectiveness of the proposed method, and results based on real AAR data compare its performance to other methods, validating the accuracy, speed, and robustness of its drogue detection ability. 展开更多
关键词 Autonomous aerial refueling Computer vision Convolutional neural net-works Deep learning Drogue detection
原文传递
Constrained adaptive neural network control of an MIMO aeroelastic system with input nonlinearities 被引量:7
16
作者 Gou Yiyong Li Hongbo +1 位作者 dong xinmin Liu Zongcheng 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2017年第2期796-806,共11页
A constrained adaptive neural network control scheme is proposed for a multi-input and multi-output(MIMO) aeroelastic system in the presence of wind gust,system uncertainties,and input nonlinearities consisting of i... A constrained adaptive neural network control scheme is proposed for a multi-input and multi-output(MIMO) aeroelastic system in the presence of wind gust,system uncertainties,and input nonlinearities consisting of input saturation and dead-zone.In regard to the input nonlinearities,the right inverse function block of the dead-zone is added before the input nonlinearities,which simplifies the input nonlinearities into an equivalent input saturation.To deal with the equivalent input saturation,an auxiliary error system is designed to compensate for the impact of the input saturation.Meanwhile,uncertainties in pitch stiffness,plunge stiffness,and pitch damping are all considered,and radial basis function neural networks(RBFNNs) are applied to approximate the system uncertainties.In combination with the designed auxiliary error system and the backstepping control technique,a constrained adaptive neural network controller is designed,and it is proven that all the signals in the closed-loop system are semi-globally uniformly bounded via the Lyapunov stability analysis method.Finally,extensive digital simulation results demonstrate the effectiveness of the proposed control scheme towards flutter suppression in spite of the integrated effects of wind gust,system uncertainties,and input nonlinearities. 展开更多
关键词 Aeroelastic system Constrained control Flutter suppression Input nonlinearities RBFNNs
原文传递
Modeling and simulation of a time-varying inertia aircraft in aerial refueling 被引量:5
17
作者 Wang Haitao dong xinmin +2 位作者 Xue Jianping Liu Jiaolong Wang Jian 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2016年第2期335-345,共11页
Studied in this paper is dynamic modeling and simulation application of the receiver aircraft with the time-varying mass and inertia property in an integrated simulation environment which includes two other significan... Studied in this paper is dynamic modeling and simulation application of the receiver aircraft with the time-varying mass and inertia property in an integrated simulation environment which includes two other significant factors, i.e., a hose-drogue assembly dynamic model with the variable-length property and the wind effect due to the tanker's trailing vortices. By extending equations of motion of a fixed weight aircraft derived by Lewis et al., a new set of equations of motion for a receiver in aerial refueling is derived. The equations include the time-varying mass and inertia property due to fuel transfer and the fuel consumption by engines, and the fuel tanks have a rectangle shape rather than a mass point. They are derived in terms of the translational and rotational position and velocity of the receiver with respect to an inertial reference frame. A linear quadratic regulator (LQR) controller is designed based on a group of linearized equations under the initial receiver mass condition. The equations of motion of the receiver with a LQR con- troller are implemented in the integrated simulation environment for autonomous approaching and station-keeping of the receiver in simulations. 展开更多
关键词 Aerial refueling Equations of motion:Hose-rogue assembly Time-varying inertia Whipping phenomenon
原文传递
异常表达CD20的结外NK/T细胞淋巴瘤二例并文献复习 被引量:2
18
作者 李杜娟 阚云珍 +3 位作者 徐紫光 康红 董新敏 孔令非 《中华血液学杂志》 CAS CSCD 北大核心 2020年第4期336-339,共4页
CD20通常被认为是B细胞淋巴瘤最常用的特异性标志物,也是利妥昔单抗的治疗靶点。结外NK/T细胞淋巴瘤(ENKTCL)异常表达CD20在临床中极为罕见。本文报道2例异常表达CD20的ENKTCL患者,并结合文献复习分析此类罕见淋巴瘤的临床病理学特征、... CD20通常被认为是B细胞淋巴瘤最常用的特异性标志物,也是利妥昔单抗的治疗靶点。结外NK/T细胞淋巴瘤(ENKTCL)异常表达CD20在临床中极为罕见。本文报道2例异常表达CD20的ENKTCL患者,并结合文献复习分析此类罕见淋巴瘤的临床病理学特征、分子遗传学改变及预后。病例资料例1,男,67岁,2018年11月13日患者以"双侧鼻塞2年,加重2个月"入院。患者2年前无诱因出现双侧鼻塞,不伴流涕、头痛、头晕,无发热、咳嗽、鼻出血,无盗汗及体重减轻,抗炎治疗效果不佳。2个月前鼻塞症状加重。 展开更多
关键词 异常表达 利妥昔单抗 双侧鼻塞 临床病理学特征 鼻塞症状 抗炎治疗 CD20 病例资料
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部