Polyethylene （PE） pipe, particularly high- density polyethylene （HDPE） pipe, has been successfully utilized to transport cooling water for both non-safety- and safety-related applications in nuclear power plant （...Polyethylene （PE） pipe, particularly high- density polyethylene （HDPE） pipe, has been successfully utilized to transport cooling water for both non-safety- and safety-related applications in nuclear power plant （NPP）. Though ASME Code Case N755, which is the first code case related to NPP HDPE pipe, requires a thorough nondestructive examination （NDE） of HDPE joints. However, no executable regulations presently exist because of the lack of a feasible NDE technique for HDPE pipe in NPP. This work presents a review of current developments in NDE technology for both HDPE pipe in NPP with a diameter of less than 400 mm and that of a larger size. For the former category, phased array ultrasonic technique is proven effective for inspecting typical defects in HDPE pipe, and is thus used in Chinese national standards GB/T 29460 and GB/T 29461. A defect- recognition technique is developed based on pattern recognition, and a safety assessment principle is summa- rized from the database of destructive testing. On the other hand, recent research and practical studies reveal that in current ultrasonic-inspection technology, the absence of effective ultrasonic inspection for large size was lack of consideration of the viscoelasticity effect of PE on acoustic wave propagation in current ultrasonic inspection technology. Furthermore, main technical problems were analyzed in the paper to achieve an effective ultrasonic test method in accordance to the safety and efficiency requirements of related regulations and standards. Finally, the development trend and challenges of NDE test technology for HDPE in NPP are discussed.展开更多
基金Acknowledgements The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China （Grant No. 51575480） and the Fundamental Research Funds for the Central Universities （Grant No. 2017FZA4012）.
文摘Polyethylene （PE） pipe, particularly high- density polyethylene （HDPE） pipe, has been successfully utilized to transport cooling water for both non-safety- and safety-related applications in nuclear power plant （NPP）. Though ASME Code Case N755, which is the first code case related to NPP HDPE pipe, requires a thorough nondestructive examination （NDE） of HDPE joints. However, no executable regulations presently exist because of the lack of a feasible NDE technique for HDPE pipe in NPP. This work presents a review of current developments in NDE technology for both HDPE pipe in NPP with a diameter of less than 400 mm and that of a larger size. For the former category, phased array ultrasonic technique is proven effective for inspecting typical defects in HDPE pipe, and is thus used in Chinese national standards GB/T 29460 and GB/T 29461. A defect- recognition technique is developed based on pattern recognition, and a safety assessment principle is summa- rized from the database of destructive testing. On the other hand, recent research and practical studies reveal that in current ultrasonic-inspection technology, the absence of effective ultrasonic inspection for large size was lack of consideration of the viscoelasticity effect of PE on acoustic wave propagation in current ultrasonic inspection technology. Furthermore, main technical problems were analyzed in the paper to achieve an effective ultrasonic test method in accordance to the safety and efficiency requirements of related regulations and standards. Finally, the development trend and challenges of NDE test technology for HDPE in NPP are discussed.
