Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechan...Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechanical and biological properties, in order to mimic the natural tissue, these properties are directly related to the architecture and their degree of porosity, as well as the size of their pores and their interconnectivity. In this perspective, the 3D printing stands out, where the structure is obtained layer by layer, according to a predetermined computational model which provides a greater control of architecture and scaffold geometry and overcomes, in this way, the limitations of traditional techniques of scaffolds manufacturing. In this way, the objective of this seminar is to present the state of the art of the polymer scaffolds produced by 3D printing and applied to bone tissue regeneration, highlighting the advantages and limitations of this process.展开更多
In this study, poly(vinyl alcohol) (PVA)-based nanocomposites consisting of metallic oxide nanoparticles (TiO2, ZnO, ZrO2) were obtained from an aqueous solution of 7% PVA, in order to compare the microstructural, and...In this study, poly(vinyl alcohol) (PVA)-based nanocomposites consisting of metallic oxide nanoparticles (TiO2, ZnO, ZrO2) were obtained from an aqueous solution of 7% PVA, in order to compare the microstructural, and physical properties of bionanocomposite films reinforced with various loading contents (0.1%, 0.2% and 0.3% w/w). They were evaluated regarding their molecular toughness through Nuclear Magnetic Resonance (NMR), regarding their chemical structural through Fourier Transform Infrared Spectroscopy (FTIR), regarding their crystallinity throught X-ray Diffraction (XRD), and regarding termal properties through Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The NMR results showed that the smallest concentrations of these oxides have a tendency to disperse better in the polymeric matrix, improving the structural toughness. Besides, changes in the termal resistance of the material were found with the use of TGA and DSC.展开更多
Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellul...Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellular adherence, proliferation and differentiation. Consequently, scaffolds are frequently used in tissue engineering with the intention of assisting the regeneration of a damaged tissue, and a major application in bone regeneration. An ideal scaffold needs to be biodegradable, biocompatible, and needs to match the biomechanical properties of bone. Polymers are widely used in this field because they fulfil the first two requirements. However, no polymeric material can achieve mechanical properties similar to the bone. For that reason, polymeric nanocomposites, which consist of ceramic/metallic nanoparticles dispersed in a polymer matrix, are being considered for bone scaffold fabrication in order to overcome this problem, since nanoparticles are known to improve composite mechanical strength, and enhance other properties.展开更多
Polymers containing nanoparticles dispersed and distributed in the matrix can be used for control of drug release. In this work, hydrophilic matrix systems were prepared using poly(vinyl alcohol) and unmodified clay c...Polymers containing nanoparticles dispersed and distributed in the matrix can be used for control of drug release. In this work, hydrophilic matrix systems were prepared using poly(vinyl alcohol) and unmodified clay containing the same amount of cephalexin. The materials were obtained through in situ polymerization and were characterized by the conventional technique of FTIR and NMR relaxometry, through determination of proton spin-lattice relaxation time, in order to understand the molecular behavior of the new materials. The NMR relaxometry data showed that the new materials containing low quantities of clay (0.25% and 0.75%) and the same amount of cephalexin (0.5 g) had very good dispersion and distribution of the clay and drug in the polymer matrix. The combination of clay and cephalexin formed a more homogenous material with a narrow domain curve and low relaxation values. The material containing 0.25% clay presented a mixed morphology, with part exfoliated and part intercalated, as could be seen from the relaxation domain distribution, which was larger than that for material with 0.75% clay.展开更多
文摘Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechanical and biological properties, in order to mimic the natural tissue, these properties are directly related to the architecture and their degree of porosity, as well as the size of their pores and their interconnectivity. In this perspective, the 3D printing stands out, where the structure is obtained layer by layer, according to a predetermined computational model which provides a greater control of architecture and scaffold geometry and overcomes, in this way, the limitations of traditional techniques of scaffolds manufacturing. In this way, the objective of this seminar is to present the state of the art of the polymer scaffolds produced by 3D printing and applied to bone tissue regeneration, highlighting the advantages and limitations of this process.
文摘In this study, poly(vinyl alcohol) (PVA)-based nanocomposites consisting of metallic oxide nanoparticles (TiO2, ZnO, ZrO2) were obtained from an aqueous solution of 7% PVA, in order to compare the microstructural, and physical properties of bionanocomposite films reinforced with various loading contents (0.1%, 0.2% and 0.3% w/w). They were evaluated regarding their molecular toughness through Nuclear Magnetic Resonance (NMR), regarding their chemical structural through Fourier Transform Infrared Spectroscopy (FTIR), regarding their crystallinity throught X-ray Diffraction (XRD), and regarding termal properties through Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The NMR results showed that the smallest concentrations of these oxides have a tendency to disperse better in the polymeric matrix, improving the structural toughness. Besides, changes in the termal resistance of the material were found with the use of TGA and DSC.
文摘Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellular adherence, proliferation and differentiation. Consequently, scaffolds are frequently used in tissue engineering with the intention of assisting the regeneration of a damaged tissue, and a major application in bone regeneration. An ideal scaffold needs to be biodegradable, biocompatible, and needs to match the biomechanical properties of bone. Polymers are widely used in this field because they fulfil the first two requirements. However, no polymeric material can achieve mechanical properties similar to the bone. For that reason, polymeric nanocomposites, which consist of ceramic/metallic nanoparticles dispersed in a polymer matrix, are being considered for bone scaffold fabrication in order to overcome this problem, since nanoparticles are known to improve composite mechanical strength, and enhance other properties.
文摘Polymers containing nanoparticles dispersed and distributed in the matrix can be used for control of drug release. In this work, hydrophilic matrix systems were prepared using poly(vinyl alcohol) and unmodified clay containing the same amount of cephalexin. The materials were obtained through in situ polymerization and were characterized by the conventional technique of FTIR and NMR relaxometry, through determination of proton spin-lattice relaxation time, in order to understand the molecular behavior of the new materials. The NMR relaxometry data showed that the new materials containing low quantities of clay (0.25% and 0.75%) and the same amount of cephalexin (0.5 g) had very good dispersion and distribution of the clay and drug in the polymer matrix. The combination of clay and cephalexin formed a more homogenous material with a narrow domain curve and low relaxation values. The material containing 0.25% clay presented a mixed morphology, with part exfoliated and part intercalated, as could be seen from the relaxation domain distribution, which was larger than that for material with 0.75% clay.
