Preparation of Multi-Wall Carbon Nanotubes/Graphene Composites with Cadmium Sulfide in Dye-Sensitized Solar Cells (DSSCs)

In the present work, Dye Sensitized Solar Cells (DSSCs) have been fabricated by utilizing a dense layer of photoelctrode cadmium sulfide thin film (CdS) as n-type, which prepared by spray coating, while p-type electrode was multi-wall carbon nanotubes/graphene (MWNT-G) composites. The experimental results showed the higher energy conversion efficiency for CdS/MWNT-G was 0.056% in comparison with the others, which were CdS/MWNT with 0.044% and CdS/G with 0.037% respectively, which referred to improvement in the conductivity by using MWNT-G. The microstructure and nanostructure of CdS, MWNT, G, and MWNT-G nanocomposite were carried out by employing Scanning Electron Microscopy (SEM). X-Ray Diffraction (XRD) has been used to get crystal size of CdS, Raman scattering, and optical absorption also used for characterizations the samples. This study promised to increase and enhance the conversion efficiency of photovoltaic devices.

Decision Support through Intelligent Agent Based Simulation and Multiple Goal Based Evolutionary Optimization

Agent based simulation has successfully been applied to model complex organizational behavior and to improve or optimize aspects of organizational performance. Agents, with intelligence supported through the application of a genetic algorithm are proposed as a means of optimizing the performance of the system being modeled. Local decisions made by agents and other system variables are placed in the genetic encoding. This allows local agents to positively impact high level system performance. A simple, but non trivial, peg game is utilized to introduce the concept. A multiple objective bin packing problem is then solved to demonstrate the potential of the approach in meeting a number of high level goals. The methodology allows not only for a systems level optimization, but also provides data which can be analyzed to determine what constitutes effective agent behavior.

An Effective of Dye Molecules with Cadmium Sulfide Nanorods in Dye Sensitized Solar Cell (DSSCs)

The aligned hexagonal cadmium sulfide nanorods (CdSNR) have been synthe-sized by hydrothermal technique at 200&#186C on fluorine tin oxide (FTO) sub-strates. Dye sensitized solar cells (DSSCs) based on the photoelectrode core-shell CdSNR array with conductive polymers nanocomposite of polyaniline (PANI) and poly(3,4-ethylenedioxyl-thiophene)/poly(styrene-sulfonate) (PEDOT:PSS) were fabricated and designed with different types of dye molecules. DSSCs were characterized utilizing scanning electron microscopy (SEM), Raman scattering, energy dispersive spectroscopy (EDS), UV-Vis absorption spectroscopy, X-ray diffraction (XRD), and photocurrent-voltage (J-V) characteristic. Results show that under illumination (AM 1.5 G), the high power conversion energy (PCE) was achieved for CdSNR/PANI-PEDOT:PSS device when it sensitized with ruthenium (II) (dye N-719) of 0.91% and a short circuit current density (Jsc) of 4.21 mA/cm2 in comparison with the other devices, which sensitized with natural dyes. The high performance of the CdSNR/PANI-PEDOT:PSS-N719 device attributed to the wide range of absorption and photostability for N719. This work shows that the CdSNR with N719 can be appropriate candidate for photovoltaics device for their low cost fabrication procedure and excellent absorption.