Torque Characteristics of High Torque Density Partitioned PM Consequent Pole Flux Switching Machines With Flux Barriers

Unique double salient structure of Permanent Magnet Flux Switching Machines(PMFSM)with both Concentrated Armature inding(CAW)and Permanent Magnet(PM)on stator attract researcher's interest for high speed brushless application when high torque density(T den)and power density(P den)are the primal requirements.However,despite of stator leakage flux,high rare-earth PM usage,PMFSM is subjected to slot effects due to presence of both PM and CAW in stator and partial saturation due to double salient structure which generates cogging torque(T cog),torque ripples(Trip)and lower average torque(T avg).To overcomne aforesaid demerits,this paper presents Partitioned PM(PPM)Consequent Pole Flux Switching Machine(PPM-CPFSM)with flux barriers to enhance flux mnodulation,curtail PM usage and diminish stator leakage flux which reduces slotting effects and partial saturation to ultimately reduces T cog and Trip In comparison with the existing state of the art,proposed PPM-CPFSM reduces 46.5390 of the total PM volumne and offer Tavg higher up to 88.8%,suppress Trip naximun up to 24.8%,diminish Tcog up to 22.74%and offer 2.45 times Tden and Pden.Furthermore,torque characteristics of proposed PPM-CPFSM is investigated utilizing space harmonics injection i.e.inverse cosine,inverse cosine with 3rd harmonics and rotor pole shaping techniques i.e.,ecce ntric circle,chanfering and notching.Detailed electromagnetic perfornance analysis reveals that harmonics injection suppressed Tcog maximun up to 83.5%,Trip up to 40.72%at the cost of 4.71%Tavg.Finally,rotor mnechanical stress analysis is utilized for rotor withstand capability and 3D-FEA based Coupled Elctromagnetic Thermal Analysis(CETA)for thermal behavior of the developed PPM CPFSM.CETA reveals that open space along PPM act as cooling duct that inprove heat dissipation.

Development of High Torque and High Power Density Hybrid Excitation Flux Switching Motor for Traction Drive in Hybrid Electric Vehicles

This paper presents design feasibility study and development of a new hybrid excitation flux switching motor (HEFSM) as a contender for traction drives in hybrid electric vehicles (HEVs). Initially, the motor general construction, the basic working principle and the design concept of the proposed HEFSM are outlined. Then, the initial drive performances of the proposed HEFSM are evaluated based on 2D-FEA, in which the design restrictions, specifications and target performances are similar with conventional interior permanent magnet synchronous motor (IPMSM) used in HEV. Since the initial results fail to achieve the target performances, deterministic design optimization approach is used to treat several design parameters. After several cycles of optimization, the proposed motor makes it possible to obtain the target torque and power of 333 Nm and 123 kW, respectively. In addition, due to definite advantage of robust rotor structure of HEFSM, rotor mechanical stress prediction at maximum speed of 12,400 r/min is much lower than the mechanical stress in conventional IPMSM. Finally, the maximum torque and power density of the final design HEFSM are approximately 11.41 Nm/kg and 5.55 kW/kg, respectively, which is 19.98% and 58.12% more than the torque and power density in existing IPMSM for Lexus RX400h.

Coupled Electromagnetic-thermal Analysis of Segmented PM Consequent Pole Flux Switching Machine

Compact stator structure of flux switching machines(FSMs)encompassing both permanent magnets(PMs)and armature winding slots(AWS)attract research interest whenever high power and density are the basic requirements.However,it also results in temperature rises owing to heat generation by electromagnetic power losses degrading the electromagnetic performance and affecting machine performance.In this study,a segmented permanent magnet(SPM)consequent pole FSM(SPM-CPFSM)is developed,which provides a stator cooling channel(duct)for improved heat dissipation to avoid demagnetization of PM as well as overheating.Furthermore,this study investigates detailed electromagnetic performance analysis and prediction of temperature variation in various machine parts owing to the heat generated by iron,copper,and magnet eddy current losses utilizing coupled electromagnetic-thermal analysis accounting for magnetic flux density variation.In comparison with the 2D analysis,the developed 3D coupled-field analysis more accurately predicts electromagnetic performance and temperature distribution.Analysis reveals that a cooling duct at the stator significantly assists in stator heat dissipation in the axial direction ensuring a safe operating condition of the PMs as well as machine parts to avoid overheating.