To better understand the evolution characteristics of bed porous structure during iron ore sintering,X-ray computed tomography scanning technology was used to analyze the pore parameters in different areas of the sint...To better understand the evolution characteristics of bed porous structure during iron ore sintering,X-ray computed tomography scanning technology was used to analyze the pore parameters in different areas of the sintering bed.A pore skeleton structure model was established to study the characteristics of the airflow channels in different zones.The absolute permeability of different areas was calculated through simulation,and the corresponding streamline and pressure drop distribution were analyzed.The results show that the porosity of raw material zone,high-temperature zone,and sintered zone increases gradually,which are 37.69%,46.41%,and 55.57%,respectively.The absolute permeability calculation results of the raw material zone and sintered zones are 792.49μm^(2) and 20560.80μm^(2),while the tortuosity is 1.77 and 1.45,respectively.Compared with the raw material zone,the flow streamline in the sintered zone is thicker and denser,the airflow resistance and the pressure drop are minor.展开更多
基金supported by National Natural Science Foundation of China (grant No.52036008).
文摘To better understand the evolution characteristics of bed porous structure during iron ore sintering,X-ray computed tomography scanning technology was used to analyze the pore parameters in different areas of the sintering bed.A pore skeleton structure model was established to study the characteristics of the airflow channels in different zones.The absolute permeability of different areas was calculated through simulation,and the corresponding streamline and pressure drop distribution were analyzed.The results show that the porosity of raw material zone,high-temperature zone,and sintered zone increases gradually,which are 37.69%,46.41%,and 55.57%,respectively.The absolute permeability calculation results of the raw material zone and sintered zones are 792.49μm^(2) and 20560.80μm^(2),while the tortuosity is 1.77 and 1.45,respectively.Compared with the raw material zone,the flow streamline in the sintered zone is thicker and denser,the airflow resistance and the pressure drop are minor.