Intravenous transplantation of bone marrow mesenchymal stem cells promotes neural regeneration after traumatic brain injury

To investigate the supplement of lost nerve cells in rats with traumatic brain injury by intravenous administration of allogenic bone marrow mesenchymal stem cells, this study established a Wistar rat model of traumatic brain injury by weight drop impact acceleration method and administered 3 × 106 rat bone marrow mesenchymal stem cells via the lateral tail vein. At 14 days after cell transplantation, bone marrow mesenchymal stem cells differentiated into neurons and astrocytes in injured rat cerebral cortex and rat neurological function was improved significantly. These findings suggest that intravenously administered bone marrow mesenchymal stem cells can promote nerve cell regeneration in injured cerebral cortex, which supplement the lost nerve cells.

Effects of variations of voltage and pH value on the shear strength of soil and durability of different electrodes and piles during electrokinetic phenomenon

Electrokinetic(EK)treatment is an effective method in accelerating the consolidation and improving the geotechnical properties of fine-grained soils.This method stabilizes the soil and increases the bearing capacity of piles by improving the soil shear strength.Changing the soil p H,due to the occurrence of chemical reactions of electrolysis in the soil,can increase its shear strength.However,the electrodes used in this method corrode due to the change in the soil p H,which in turn reduces the electrical potential.Electrode corrosion and loss of electrical potential can significantly reduce the efficiency of the EK method.In addition,when using the EK method to increase the bearing capacity of piles,changing the p H can cause corrosion and damage to the piles.One of the most important factors influencing the change in the p H of soil is the voltage applied during the EK process.It was reported that increasing the voltage affects the intensity of chemical reactions and electroosmotic flow and thus increases the efficiency of EK.However,very limited research has been conducted on the effect of voltage on the performance of EK method.In the present study,the effects of three voltages on soil p H and corrosion resistance of four types of electrodes including iron(Ir),stainless steel(St),copper(Co),and aluminium(Al)were studied.In addition,the effects of p H variations on the corrosion rate of three types of piles including steel pile(SP),reinforced cement concrete pile(RCCP),and reinforced lime-cement concrete pile(RLCCP)were investigated.It was observed that increasing the voltage from a specific limit had no effect on the intensity of electrolysis reactions and the soil p H adjacent to the electrodes did not change more than a specific limit.Moreover,increasing the voltage to higher than 35 V(i.e.45 V)did not increase the volume of drained water from the soil,but caused more electric current than the allowable current for Ir,St,and Al electrodes,and the corrosion intensity of these electrodes increased significantly.RCCP reduced the soil p H to 2.4 within 7 d of curing due to severe corrosion(13%corrosion rate).The soil p H values adjacent to RCCP and RLCCP within 28 d of curing reduced to 3.7 and 3.8,respectively,but the two piles were not damaged.In general,the results of this research showed that selecting an optimized voltage had a significant effect on the efficiency of EK,and increasing the voltage did not always lead to increase in the efficiency of EK process.