Recent Progress in Improving Rate Performance of Cellulose-Derived Carbon Materials for Sodium-Ion Batteries

Cellulose-derived carbon is regarded as one of the most promising candidates for high-performance anode materials in sodium-ion batteries;however,its poor rate performance at higher current density remains a challenge to achieve high power density sodium-ion batteries.The present review comprehensively elucidates the structural characteristics of cellulose-based materials and cellulose-derived carbon materials,explores the limitations in enhancing rate performance arising from ion diffusion and electronic transfer at the level of cellulose-derived carbon materials,and proposes corresponding strategies to improve rate performance targeted at various precursors of cellulose-based materials.This review also presents an update on recent progress in cellulose-based materials and cellulose-derived carbon materials,with particular focuses on their molecular,crystalline,and aggregation structures.Furthermore,the relationship between storage sodium and rate performance the carbon materials is elucidated through theoretical calculations and characterization analyses.Finally,future perspectives regarding challenges and opportunities in the research field of cellulose-derived carbon anodes are briefly highlighted.

High-efficiently doping nitrogen in kapok fiber-derived hard carbon used as anode materials for boosting rate performance of sodium-ion batteries

The engineering of plant-based precursor for nitrogen doping has become one of the most promising strategies to enhance rate capability of hard carbon materials for sodium-ion batteries;however,the poor rate performance is mainly caused by lack of pyridine nitrogen,which often tends to escape because of high temperature in preparation process of hard carbon.In this paper,a high-rate kapok fiber-derived hard carbon is fabricated by cross-linking carboxyl group in 2,6-pyridinedicarboxylic acid with the exposed hydroxyl group on alkalized kapok with assistance of zinc chloride.Specially,a high nitrogen doping content of 4.24%is achieved,most of which are pyridine nitrogen;this is crucial for improving the defect sites and electronic conductivity of hard carbon.The optimized carbon with feature of high nitrogen content,abundant functional groups,degree of disorder,and large layer spacing exhibits high capacity of 401.7 mAh g^(−1)at a current density of 0.05 A g^(−1),and more importantly,good rate performance,for example,even at the current density of 2 A g^(−1),a specific capacity of 159.5 mAh g^(−1)can be obtained.These findings make plant-based hard carbon a promising candidate for commercial application of sodium-ion batteries,achieving high-rate performance with the enhanced pre-cross-linking interaction between plant precursors and dopants to optimize aromatization process by auxiliary pyrolysis.

A Novel Hierarchical Porous 3D Structured Vanadium Nitride/Carbon Membranes for High-performance Supercapacitor Negative Electrodes

Transition-metal nitrides exhibit wide potential windows and good electrochemical performance, but usually experience imbalanced practical applications in the energy storage field due to aggregation, poor circulation stability, and complicated syntheses. In this study, a novel and simple multiphase polymeric strategy was developed to fabricate hybrid vanadium nitride/carbon(VN/C) membranes for supercapacitor negative electrodes, in which VN nanoparticles were uniformly distributed in the hierarchical porous carbon 3D networks. The supercapacitor negative electrode based on VN/C membranes exhibited a high specific capacitance of 392.0 F g^(-1) at 0.5 A g^(-1) and an excellent rate capability with capacitance retention of 50.5% at 30 A g^(-1). For the asymmetric device fabricated using Ni(OH)_2//VN/C membranes, a high energy density of 43.0 Wh kg^(-1) at a power density of800 W kg^(-1) was observed. Moreover, the device also showed good cycling stability of 82.9% at a current density of 1.0 A g^(-1) after 8000 cycles. This work may throw a light on simply the fabrication of other high-performance transition-metal nitridebased supercapacitor or other energy storage devices.

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes: Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.

Selenium-doped cathode materials with polyaniline skeleton for lithium-organosulfur batteries

Sulfur-containing polymer(SCP)is considered as an outstanding cathode material for lithium-sulfur batteries.However,undesirable soluble polysulfides may shuttle in electrolyte,concluding long-chain Li_(2)S_(n)(n>4)and short-chain Li2Sn(n≤4),as well as the sluggish conversion kinetics are yet to be solved to enhance the performance of lithium-sulfur batteries.Here Se-doped sulfurized polyaniline with adjusted sulfur-chain-S_(x)-(x≤6)contribute to ensure the absence of long-chain polysulfides,and the skeleton with quinoid imine can endow strongly adsorption towards short-chain polysulfides by the reversible transition between deprotonated/protonated imine(-NH^(+)=and-N=),which offer double insurance against suppressing“shuttle effect”.Furthermore,Se atoms are doped into sulfurized polysulfides to accelerate the redox conversion and take a frontier orbital theory-oriented view into catalytic mechanism.Se-doped sulfurized polyaniline as active materials for lithium-organosulfur batteries delivers good electrochemical performance,including high rate,reversible specific capacity(680 mA h g^(-1)at 0.1 A g^(-1)),and lower capacity decay rate only of 0.15%with near 100%coulomb efficiency during long-term cycle.This work provides a valuable guiding ideology and promising solution for the chemistry-oriented structure design and practical application for lithium-organosulfur batteries.

Microporous carbon nanofibers prepared by combining electrospinning and phase separation methods for supercapacitor

Microporous carbon nanofibers (MCNFs) derived from polyacrylonitrile nanofibers were fabricated via electrospinning technology and phase separation in the presence of polyvinylpyrrolidone (PVP). PVP together with a mixed solvent of N, N-Dimethylformamide and dimethyl sulfoxide was used as pore forming agent. The influences of PVP content in casting solution on the structure and electrochemical performance of the MCNFs were also investigated. The highest capacitance of 200 F/g was obtained on a three-electrode system at a scan rate of 0.5 A/g. The good performance was owing to the high specific surface area and the large amount of micro-pores, which enhanced the absorption and the transportation efficiency of electrolyte ion during charge/discharge process. This research indicated that the combination of electrospinning and phase separation technology could be used to fabricate microporous carbon nanofibers as electrode materials for supercapacitors with high specific surface area and outstanding electrochemical performance. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Novel Hybrid Nanoparticles of Vanadium Nitride/Porous Carbon as an Anode Material for Symmetrical Supercapacitor

Hybrid materials of vanadium nitride and porous carbon nanoparticles(VN/PCNPs) were fabricated by a facile pyrolysis process of vanadium pentoxide(V_2O_5) xerogel and melamine at relatively low temperature of 800 °C for supercapacitor application. The effects of the feed ratio of V_2O_5 to melamine(r), and nitrogen flow rate on the microstructure and electrochemical performance were also investigated. It was found that the size of the as-synthesized nanoparticles is about 20 nm. Both r value and N_2 flow rate have enormous impacts on morphology and microstructure of the nanoparticle, which correspondingly determined the electrochemical performance of the material. The VN/C hybrid nanoparticles exhibited high capacitive properties, and a maximum specific capacitance of 255.0 Fg^(-1) was achieved at a current density of 1.0 Ag^(-1) in 2 M KOH aqueous electrolyte and the potential range from 0 to -1.15 V. In addition,symmetrical supercapacitor fabricated with the as-synthesized VN/PCNPs presents a high specific capacitance of 43.5 F g^(-1) at 0.5 A g^(-1) based on the entire cell, and an energy density of 8.0 Wh kg^(-1) when the power density was 575 W kg^(-1). Even when the power density increased to 2831.5 W kg^(-1), the energy density still remained 6.1 Wh kg^(-1).

Hollow Carbon Microspheres/MnO_2 Nanosheets Composites:Hydrothermal Synthesis and Electrochemical Behaviors

This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy reveal that MnO2 nanosheets homogeneously grow onto the surface of micro-HC to form a loose-packed microstructure. The quantity of MnO2 required in the electrode layer has thereby been reduced significantly, and higher specific capacitances have been achieved. The micro-HC/nano-MnO2 electrode presents a high capacitance of 239.0 F g-1 at a current density of 5 m A cm-2, which is a strong promise for high-rate electrochemical capacitive energy storage applications.

A bird nest-like manganese dioxide and its application as electrode in supercapacitors

A novel bird nest-like nanostructured MnO2(BNNS-MnO2) was prepared by a facile and cost-effective strategy. Their structures and morphologies were characterized by field emission scanning electron microscopy, transmission electron microscopy and powder X-ray diffraction. Capacitive behaviors were investigated by cyclic voltammetry and galvanostatic charge-discharge. The obtained nano-MnO2 possesses a well designed loose-assembled hierarchical nanoarchitecture with an appropriate crystallinity which gives rise to excellent performances as an electrode material for supercapacitors. A maximum specific capacitance of 917 F/g has been obtained at a current density of 5 mA/cm2 in 6 mol/L KOH aqueous solution, and a specific capacitance of 210 F/g has been maintained for 500 cycles. As the low cost of MnSO4 and KCr2O7 and the low reaction temperature, the present method avoids the requirements for complicated operations, time/energy-consuming and expensive reagents, and perhaps is ready for the industrialization of nano-MnO2 production.

A dandelion-like carbon microsphere/MnO_2 nanosheets composite for supercapacitors

This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy(SEM) and transmission electron microscopy(TEM) revealed that MnO2nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO2active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO2composite presented high capacitance of 181 F g-1and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na2SO4solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.

Energy Storage Mechanism of Vanadium Nitride via Intercalating Different Atomic Radius for Expanding Interplanar Spacing

As a promising anode material in supercapacitors,vanadium nitride has been widely concerned due to its ultra-high theoretical specific capacitance.However,its routine test capacitance value is still far from the theoretical value and its energy storage mechanism is controversial.In order to solve these two key problems,here we prepare interplanar spacing expanded vanadium nitride materials with different impurity atoms intercalation from two anionic precursors of vanadium-based metal organic frameworks with different functional groups.The obtained vanadium nitride reaches a higher specific capacitance;and further,through ex situ X-Ray diffraction and in situ Raman,the charge storage of vanadium nitride is contributed by two processes:the first benefit is from the K^(+) de/intercalation in the interplanar spacing,and the other one is derived from the redox reaction with OH−by adsorption on surface.Furthermore,both of the first principle calculation and extended experiments support this idea.We believe that such detailed research on the energy storage mechanism can provide a clear idea for the application of metal nitrides in supercapacitors and other energy storage devices.

Preparation of nano-PANI@MnO_2 by surface initiated polymerization method using as a nano-tubular electrode material:The amount effect of aniline on the microstructure and electrochemical performance

In this study,nano-polyanline and manganese oxide nanometer tubular composites（nano-PANI@MnO2）were prepared by a surface initiated polymerization method and used as electrochemical capacitor electrode materials; and the effect of aniline amount on the microstructure and electrochemical performance was investigated. The microstructures and surface morphologies of nano-PANI@MnO2 were characterized by X-ray diffraction,scanning electron microscopy and fourier transformation infrared spectroscope. The electrochemical performance of these composite materials was performed with cyclic voltammetry,charge–discharge test and electrochemical impedance spectroscopy,respectively. The results demonstrate that the feed ratio of aniline to MnO2 played a very important role in constructing the hierarchically nano-structure,which would,hence,determine the electrochemical performance of the materials. Using the templateassisted strategy and controlling the feed ratio of aniline to MnO2,the nanometer tubular structure of nanoPANI@MnO2 was obtained. A maximum specific capacitance of 386 F/g was achieved in aqueous 1 mol/L Na NO3 electrolyte with the potential range from 0 to 0.6 V（vs. SCE）.

Preparation and Properties of Guiqi Polysaccharides/Chitosan/Alginate Composite Hydrogel Microspheres

A series of the Guiqi polysaccharides/chitosan/alginate composite hydrogel microspheres(GPcM)with different particle sizes were prepared with Guiqi polysaccharides(GP),chitosan(CS)and sodium alginate(Alg).The optimum preparation process was also determined by single factor and orthogonal experiment analysis.The GPcM were characterized by fourier transform infrared spectroscopy(FT-IR),scanning electron microscope(SEM),drug loading efficiency test(LE),encapsulation efficiency test(EE)and in vitro release study.The results showed that the Guiqi polysaccharides chitosan hydrogel(GPCH)and sodium alginate hydrogel(SAH)formed a crossover system in GPcM.The GPcM have a uniform particle size ranging from 395.1μm to 841.5μm.The drug loading efficiency and encapsulation efficiency of the GPcM were 56.3%and 72.6%,respectively.The bovine serum albumin(BSA)loaded in the GPcM released slowly within 180 h.The results suggested that the GPcM may have potential application value in drug sustained and controlled release system.

Synthesis of amphiphilic tri-block copolymerpoly(vinylpyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinylpyrrolidone) for the modification of polyethersulfone membrane

Well-defined amphiphilic tri-block copolymer PVP-b-PMMA-b-PVP was prepared for the first time via successive reversible addition fragmentation chain transfer（RAFT） polymerization using carboxyl-terminated trithiocarbonate as the RAFT agent.The structure of the copolymer was characterized using FTIR,GPC and ~1H NMR.The block copolymer could be directly blended with polyethersulfone（PES） as a macromolecule additive using N-methyl-2-pyrrolidone（NMP） as the solvent to prepare membranes. The water contact angles for the modified membranes decreased obviously,and therefore,the protein adsorption amount on the membrane surface decreased.

Bioabsorbable fabrication of molybdenum nitride/carbon nanocomposites for supercapacitors and metal ion batteries with robust stability

Metal nitride is one of the best anode materials of the energy storage device;however,the low stability of the pure metal nitride limits its wide applications.In this work,a new method of bioabsorbable fabrication was developed for preparing molybdenum nitride that corporates into the porous carbon materials.The molybdenum ions in pollutions could be easily absorbed by Ligustrum quihoui,and the transportation,accumulation,and circulation of molybdenum ions in Ligustrum quihoui were studied.The obtained composite material of biochar and molybdenum nitride is employed as anode material of supercapacitors and batteries which exhibits good electrochemical performance,especially the rate and long lifespan aspects.Typically,it is found that the specific capacity is344 F·g^(-1)at current density of 0.5 A·g^(-1)in 2 mol·L^(-1)KOH,and the capacitance retention and coulomb efficiency are above 90%after 10,000 cycles.It should be noted that the novel approach combines fabricating anode materials with advanced nanostructure and suppressing the environmental problems with metal pollution at the same time.

Carboxylic bacterial cellulose fiber-based hydrogel electrolyte with imidazole-type ionic liquid for dendrite-free zinc metal batteries

Aqueous zinc metal batteries are regarded as the most promising energy storage system due to their advantages of high safety,low cost,and high theoretical capacity.However,the growth of dendrites and the occurrence of side reactions hinder the development of zinc metal batteries.Despite previous attempts to design advanced hydrogel electrolytes,achieving high mechanical performance and ionic conductivity of hydrogel electrolytes has remained challenging.In this work,a hydrogel electrolyte with an ionic crosslinked network is prepared by carboxylic bacterial cellulose fiber and imidazole-type ionic liquid,following by a covalent network of polyacrylamide.The hydrogel electrolyte possesses a superior ionic conductivity of 43.76 mS cm^(−1),leading to a Zn^(2+)migration number of 0.45,and high mechanical performance with an elastic modulus of 3.48 GPa and an elongation at breaking of 38.36%.More importantly,under the anion-coordination effect of the carboxyl group in bacterial cellulose and[BF4]−in imidazole-type ionic liquid,the solvation sheath of hydrated Zn^(2+)ions and the nucleation overpotential of Zn plating are regulated.The results of cycled testing show that the growth of zinc dendrites is effectively inhibited and the generation of irreversible by-products is reduced.With the carboxylic bacterial cellulose-based hydrogel electrolyte,the Zn||Zn symmetric batteries offer good cyclability as well as Zn||Ti batteries.

Mn,N co-doped Co nanoparticles/porous carbon as air cathode for highly efficient rechargeable Zn-air batteries Hide Author's Information

Oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are generally catalyzed by precious metals(Pt)and metal oxides(IrO_(2))which still have many shortages including expensive price,poor selectivity and undesirable stability.In this work,we report a Mn0-doped CoN_(x) on N-doped porous carbon(Mn-CoN_(x)/N-PC)composite from carbonizing metal-organic framework(MOF)derivative as the dual-functional catalyst to boost both the ORR and OER performances.Owing to the strong coordination effect between nitrogen and metal elements,the introduction of N can obviously improve the content of Co-N-C active sites for ORR.Meanwhile,the Mn-doping significantly regulates the electronic structure of the Co element and increases the content of Co^(0) which provide efficient OER active sites.Mn-CoN_(x)/N-PC catalyst delivers super dual-functional activity with a half-wave potential of 0.85 V,better than the 20%Pt/C catalyst(0.82 V).When used in Zn-air batteries for testing,Mn-CoN_(x)/N-PC electrocatalyst shows a high power density(145 mW·cm^(−2))and good cycle performance.

Sulfur-containing polymer cathode materials: From energy storage mechanism to energy density

Besides lithium-ion batteries, it is imperative to develop new battery energystorage system with high energy density. In conjunction with the developmentof Li-S batteries, emerging sulfur-containing polymers with tunable sulfur-chain length and organic groups gradually attract much attention as cathodematerials. This can avoid the problems that are impeding the development ofthe typical Li-S batteries, such as volume expansion, active material dissolu-tion, shuttle effect, and so on. This review aims to generalize the type ofsulfur-containing polymers and the working principles in Li-S batteries. Thesulfur-containing polymers (R-Sn-R) with different sulfur-chain length (n > 6,n ≤ 2, and 3 ≤ n ≤ 6) are summarized. It also discusses several organic groupssuch as phenyl rings, N-heterocycles, and unique structure with cross-linkednetworks and multi-micropores skeleton. This review also explores other strat-egies of sulfur-containing polymers in the rest of Li-S batteries, providing asummary of the advantages of sulfur-containing polymers, recent develop-ment, in-depth discussion of the mechanism in Li-S batteries, and organicgroup-structure-performance relationship. This review would have guidelinesfor future development of sulfur-containing polymers in Li-S batteries.

Hierarchical porous nanofibers of carbon@nickel oxide nanoparticles derived from polymer/block copolymer system

The triblock copolymer(PAA-b-PAN-b-PAA) iSs prepared by reversible addition-fragmentation chaintransfer polymerization,and then blended with polymer(PAN) and metal hydroxide(Ni(OH)2) as a precursor for heat-treatment.A composite material of hierarchical porous nanofibers and nickel oxide nanopa rticles(HPCF@NiO) is prepared by electrospinning combined with high-tempe rature carbonization.The effects of the ratio of PAA and PAA-b-PAN-b-PAA on the internal structure of nanofibers and their electrochemical properties as positive electrode materials are investigated.The experimental results show that when the ratio of PAA to PAA-b-PAN-b-PAA is 1.3 to 0.4,it has good pore structure and excellent electrochemical performance.At the current density of 1 A/g,the specific capacitance is 188.7 F/g and the potential window is -1 V to 0.37 V.The asymmetric supercapacitor assembled with activated carbon as the negative electrode materials has a specific capacitance of 21.2 F/g in 2 mol/L KOH and a capacitance retention of 85.7% after 12,500 cycles at different current density.