The 3D nanoimaging beamline at SSRF

Full-field transmission X-ray microscopy(TXM)is a powerful non-destructive three-dimensional(3D)imaging method with a nanoscale spatial resolution that has been used in most synchrotron facilities worldwide.An in-house-designed TXM system was constructed at the BL18B 3D nanoimaging beamline at the Shanghai Synchrotron Radiation Facility.The beamline operates from 5 to 14 keV and enables 20 nm spatial resolution imaging.The characterization details of the beamline are described in this paper.The performances in terms of spatial resolution,nano-CT,and nano-spectral imaging of the TXM beamline are also presented in this article.

Methodology development and application of X-ray imaging beamline at SSRF

This paper introduces some latest developments regarding the X-ray imaging methodology and applications of the X-ray imaging and biomedical application beamline(BL13W1)at Shanghai Synchrotron Radiation Facility in the past 5 years.The photon energy range of the beamline is 8–72.5 keV.Several sets of X-ray imaging detectors with different pixel sizes(0.19–24 lm)are used to realize X-ray microcomputed tomography(X-ray micro-CT)and X-ray in-line phase-contrast imaging.To satisfy the requirements of user experiments,new X-ray imaging methods and image processing techniques are developed.In vivo dynamic micro-CT experiments with living insects are performed in 0.5 s(sampling rate of 2 Hz,2 tomograms/s)with a monochromatic beam from a wiggler source and in 40 ms(sampling rate of 25 Hz,25 tomograms/s)with a white beam from a bending magnet source.A new X-ray imaging method known as move contrast X-ray imaging is proposed,with which blood flow and moving tissues in raw images can be distinguished according to their moving frequencies in the time domain.Furthermore,X-ray speckle-tracking imaging with twice exposures to eliminate the edge enhancement effect is developed.A high-precision quantification method is realized to measure complex three-dimensional blood vessels obtained via X-ray micro-CT.X-ray imaging methods such as three-dimensional X-ray diffraction microscopy,small-angle X-ray scattering CT,and X-ray fluorescence CT are developed,in which the X-ray micro-CT imaging method is combined with other contrast mechanisms such as diffraction,scattering,and fluorescence contrasts respectively.Moreover,an X-ray nano-CT experiment is performed with a 100 nm spatial resolution.Typical user experimental results from the fields of material science,biomedicine,paleontology,physics,chemistry,and environmental science obtained on the beamline are provided.

X-ray fluorescence microtomography based on polycapillary- focused X-rays from laboratory source

X-ray fluorescence microtomography(μXFCT)is a nondestructive analytical technique and has been widely used to nondestructively detect and quantify the elemental composition and distributions in samples. Usually, synchrotron radiation X-rays are used for μXFCT, due to its high flux density. In this paper, a laboratory-sourcebased μXFCT system was developed, in which a polycapillary lens is employed to focus the X-ray beam and improve the flux density. The maximum likelihood expectation maximization algorithm was used to reconstruct the computed tomography slices at a limited number of projections. The experimental results demonstrated that the developed system could reveal the elemental distribution inside the test sample, with an elemental sensitivity of 1000 ppm.

Fast valve power loss evaluation method for modular multi-level converter operating at high-frequency

There is no common accepted way for calculating the valve power loss of modular multilevel converter(MMC).Valve power loss estimation based on analytical calculation is inaccurate to address the switching power loss and valve power loss estimation based on detailed electro-magnetic simulation is of low speed.To solve this problem,a method of valve power loss estimation based on the detailed equivalent simulation model of MMC is proposed.Results of valve power loss analysis of 201-level 500MW MMC operating at 50Hz~1000Hz are presented.It is seen that the valve power loss of a MMC increased by 12,40 and 93%under 200Hz,500Hz and 1000Hz operating frequency.The article concludes that in a device with isolated inner AC system,MMC operating at higher frequency will be more competitive than typical 50Hz/60Hz MMC with moderate increase of operating power loss and significant reduction of the size of the AC components.