Various characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller surface-area measurements, thermogravimetry–d...Various characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller surface-area measurements, thermogravimetry–differential scanning calorimetry, X-ray diffraction, and infrared spectroscopy, were used to study the mineral structure and surface characteristics of high-iron hydrargillite. Gibbsite, goethite, and hematite were found to be the main mineral components of hydrargillite, whereas the goethite and hematite were closely clad to the surface of the multilayer gibbsite crystals. Compared with the synthetic gibbsite, the hydrargillite contained more structural micropores generated by the mineral evolution during the mineralization process. The gibbsite in hydrargillite contained less crystal water compared with the synthetic gibbsite, and it was a typical polymorphic structure. The isomorphous substitution of Al and Fe was observed in goethite. The dissolution-controlling step of hydrargillite was the ionic diffusion speed because of the goethite and hematite that closely covered and encapsulated the gibbsite crystals.展开更多
The dissolution performance of black aluminum dross(BAD)in cryolite electrolyte is key to its recovery by molten salt electrolysis.The stable operation of the electrolyzer depends mainly on the rapid dissolution of BA...The dissolution performance of black aluminum dross(BAD)in cryolite electrolyte is key to its recovery by molten salt electrolysis.The stable operation of the electrolyzer depends mainly on the rapid dissolution of BAD in Na_(3)AlF_(6)-AlF_(3)-Al_(2)O_(3)electrolyte system.In this paper,the dissolution performance and behavior of BAD and its main components in the cryolite system were studied,and the saturation solubility of aluminum nitride in this system was determined.The dissolution performance of BAD in cryolite electrolyte before and after denitration was compared,and the effects of temperature,cryolite ratio,and the doping ratio of BAD and alumina on the dissolution rate were investigated.The obtained results showed that aluminum nitride was the main factor affecting the dissolution performance of BAD in the electrolyte.Aluminum nitride was partly converted toα-Al_(2)O_(3)after addition to the electrolyte,and the convertedα-Al_(2)O_(3)was partially dissolved in the cryolite electrolyte,while the remaining precipitated and accumulated at the bottom with aluminum nitride.Aluminum nitride was almost insoluble in the cryolite electrolyte,with 0.0022%solubility.A higher proportion ofα-Al_(2)O_(3)in BAD was negatively influenced its solubility in the cryolite electrolyte.The dissolution rate of BAD in cryolite electrolytes was effectively improved by mixing BAD withγ-Al_(2)O_(3).展开更多
基金Project(2019YFC1908400)supported by the National Key Research and Development Program of ChinaProject(2018BDE02050)supported by the Key Research and Development Program of Ningxia Hui Autonomous Region,China+1 种基金Project(2302018FRF-TP-18-095A1)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2018-XY-14)supported by the Special Funds for Scientific and Technological Consultation of Academicians,China。
基金financially supported by the National Natural Science Foundation of China (No.51104041)
文摘Various characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller surface-area measurements, thermogravimetry–differential scanning calorimetry, X-ray diffraction, and infrared spectroscopy, were used to study the mineral structure and surface characteristics of high-iron hydrargillite. Gibbsite, goethite, and hematite were found to be the main mineral components of hydrargillite, whereas the goethite and hematite were closely clad to the surface of the multilayer gibbsite crystals. Compared with the synthetic gibbsite, the hydrargillite contained more structural micropores generated by the mineral evolution during the mineralization process. The gibbsite in hydrargillite contained less crystal water compared with the synthetic gibbsite, and it was a typical polymorphic structure. The isomorphous substitution of Al and Fe was observed in goethite. The dissolution-controlling step of hydrargillite was the ionic diffusion speed because of the goethite and hematite that closely covered and encapsulated the gibbsite crystals.
基金financially supported by the National Key Research and Development Program of China(No.2019YFC1908403)the National Research Foundation from the government of the Republic of Korea(Nos.2022K1A3A1A20014496 and 2022R1F1A1074707)。
文摘The dissolution performance of black aluminum dross(BAD)in cryolite electrolyte is key to its recovery by molten salt electrolysis.The stable operation of the electrolyzer depends mainly on the rapid dissolution of BAD in Na_(3)AlF_(6)-AlF_(3)-Al_(2)O_(3)electrolyte system.In this paper,the dissolution performance and behavior of BAD and its main components in the cryolite system were studied,and the saturation solubility of aluminum nitride in this system was determined.The dissolution performance of BAD in cryolite electrolyte before and after denitration was compared,and the effects of temperature,cryolite ratio,and the doping ratio of BAD and alumina on the dissolution rate were investigated.The obtained results showed that aluminum nitride was the main factor affecting the dissolution performance of BAD in the electrolyte.Aluminum nitride was partly converted toα-Al_(2)O_(3)after addition to the electrolyte,and the convertedα-Al_(2)O_(3)was partially dissolved in the cryolite electrolyte,while the remaining precipitated and accumulated at the bottom with aluminum nitride.Aluminum nitride was almost insoluble in the cryolite electrolyte,with 0.0022%solubility.A higher proportion ofα-Al_(2)O_(3)in BAD was negatively influenced its solubility in the cryolite electrolyte.The dissolution rate of BAD in cryolite electrolytes was effectively improved by mixing BAD withγ-Al_(2)O_(3).
