Effect of an adverse pressure gradient on the streamwise Reynolds stress profile maxima in a turbulent boundary layer

It is widely accepted that in a turbulent boundary layer （TBL） with adverse pressure gradient （APG） an outer peak usually appears in the profile of streamwise Reynolds stress. However, the effect of APG on this outer peak is not clearly understood. In this paper, the effect of APG is analysed using the numerical and experimental results in the literature. Because the effect of upstream flow is inherent in the TBL, we first analyse this effect in TBLs with zero pressure gradient on flat plates. Under the individual effect of upstream flow, an outer peak already appears in the profile of streamwise Reynolds stress when the TBL continues developing in the streamwise direction. The APG accelerates the appearance of the outer peak, instead of being a trigger.

Topological Studies of Three-dimensional Flows in a High Pressure Compressor Stator Blade Row without and with Boundary Layer Aspiration

This paper presents a numerical study of the flow topologies of three-dimensional （3D） flows in a high pressure compressor stator blade row without and with boundary layer aspiration on the hub wall. The stator blade is representative of the first stage operating under transonic inlet conditions and the blade design encourages development of highly complex 3D flows. The blade has a small tip clearance. The computational fluid dynamics （CFD） studies show progressive increase of hub corner stall with the increase in incidence. Aspiration is implemented on the hub wall via a slot in the comer between the hub wall and the suction surface. The CFD studies show aspiration to be sensitive to the suction flow rate; lower rate leads to very complex flow struc- tures and increased level of losses whereas higher rate renders aspiration effective for control of hub comer separation. The flow topologies are studied by trace of skin friction lines on the walls. The nature of flow can be explained by the topological rules of closed separation. Furthermore, a deeper analysis is done for a particular case with advanced criterion to test the non-degeneracy of critical points in the flow field.

A second-order numerical method for elliptic equations with singular sources using local flter

The presence of Dirac delta function in differential equation can lead to a discontinuity,which may degrade the accuracy of related numerical methods.To improve the accuracy,a secondorder numerical method for elliptic equations with singular sources is introduced by employing a local kernel flter.In this method,the discontinuous equation is convoluted with the kernel function to obtain a more regular one.Then the original equation is replaced by this fltered equation around the singular points,to obtain discrete numerical form.The unchanged equations at the other points are discretized by using a central difference scheme.1D and 2D examples are carried out to validate the correctness and accuracy of the present method.The results show that a second-order of accuracy can be obtained in the fltering framework with an appropriate integration rule.Furthermore,the present method does not need any jump condition,and also has extremely simple form that can be easily extended to high dimensional cases and complex geometry.