Conventional electrode preparation techniques of supercapacitors such as tape casting or vacuum filtration often lead to the restacking or agglomeration of twodimensional(2 D)materials.As a result,tortuous paths are c...Conventional electrode preparation techniques of supercapacitors such as tape casting or vacuum filtration often lead to the restacking or agglomeration of twodimensional(2 D)materials.As a result,tortuous paths are created for the electrolyte ions and their adsorption onto the surfaces of the active materials can be prevented.Consequently,maintaining high rate performance while increasing the thickness of electrodes has been a challenge.Herein,a facile freeze-assisted tape-casting(Fa TC)method is reported for the scalable fabrication of flexible MXene(Ti3C2Tx)supercapacitor electrode films of up to 700μm thickness,exhibiting homogeneous ice-template microstructure composed of vertically aligned MXene walls within lamellar pores.The efficient ion transport created by the internal morphology allows for fast electrochemical charge–discharge cycles and near thickness-independent performance at up to 3000 m V s-1 for films of up to 300μm in thickness.By increasing the scan rate from 20 to 10,000 m V s-1,Ti3C2Tx films of 150μm in thickness sustain 50%of its specific capacitance(222.9 F g-1).When the film thickness is doubled to 300μm,its capacitance is still retained by 60%(at 213.3 F g-1)when the scan rate is increased from 20 to3000 m V s-1,with a capacitance retention above 97.7%for over 14,000 cycles at10 A g-1.They also showed a remarkably high gravimetric and areal power density of 150 k W kg-1 at 1000 A g-1 and 667 m W cm-2 at 4444 m A cm-2,respectively.Fa TC has the potential to provide industry with a viable way to fabricate electrodes formed from 2 D materials on a large scale,while providing promising performance for use in a wide range of applications,such as flexible electronics and wearable energy storage devices.展开更多
基金supported by the Henry Royce Institute for Advanced Materials,funded through EPSRC grants EP/R00661X/1,EP/S019367/1,EP/P025021/1,and EP/P025498/1the University of Manchester for the President’s Doctoral Scholar AwardEPSRC for funding through the grants EP/R023034/1 and EP/N032888/1
文摘Conventional electrode preparation techniques of supercapacitors such as tape casting or vacuum filtration often lead to the restacking or agglomeration of twodimensional(2 D)materials.As a result,tortuous paths are created for the electrolyte ions and their adsorption onto the surfaces of the active materials can be prevented.Consequently,maintaining high rate performance while increasing the thickness of electrodes has been a challenge.Herein,a facile freeze-assisted tape-casting(Fa TC)method is reported for the scalable fabrication of flexible MXene(Ti3C2Tx)supercapacitor electrode films of up to 700μm thickness,exhibiting homogeneous ice-template microstructure composed of vertically aligned MXene walls within lamellar pores.The efficient ion transport created by the internal morphology allows for fast electrochemical charge–discharge cycles and near thickness-independent performance at up to 3000 m V s-1 for films of up to 300μm in thickness.By increasing the scan rate from 20 to 10,000 m V s-1,Ti3C2Tx films of 150μm in thickness sustain 50%of its specific capacitance(222.9 F g-1).When the film thickness is doubled to 300μm,its capacitance is still retained by 60%(at 213.3 F g-1)when the scan rate is increased from 20 to3000 m V s-1,with a capacitance retention above 97.7%for over 14,000 cycles at10 A g-1.They also showed a remarkably high gravimetric and areal power density of 150 k W kg-1 at 1000 A g-1 and 667 m W cm-2 at 4444 m A cm-2,respectively.Fa TC has the potential to provide industry with a viable way to fabricate electrodes formed from 2 D materials on a large scale,while providing promising performance for use in a wide range of applications,such as flexible electronics and wearable energy storage devices.
