The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was syn...The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> (OH)<sub>2</sub>, Li<sub>2</sub>CO<sub>3</sub> as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi<sub>0.4985</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> Mg<sub>0.0015</sub>O<sub>2</sub> cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm<sup>3</sup>. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance.展开更多
Electrochemical impedance spectroscopy was employed to investigate the permeation of electrolyte ions in thioctic acid self-assembled monolayer when its structure was changed by the interaction of copper ions. The ion...Electrochemical impedance spectroscopy was employed to investigate the permeation of electrolyte ions in thioctic acid self-assembled monolayer when its structure was changed by the interaction of copper ions. The ion permeation was evaluated by using relatively low excitation frequencies, 0.2 Hz to 1000 Hz, and quantified by an extra resistive component in the equivalent circuit (RSAM). The extent of ion permeation affected by the electrode potentials and the electrolyte concentration were investigated. The experimental results verified that RSAM decreased ~70% by interaction with copper ions and that RSAM increased ~2 - 3 times when the electrolyte concentration was decreased by 10 times. This analysis can be performed without addition of redox species.展开更多
文摘The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> (OH)<sub>2</sub>, Li<sub>2</sub>CO<sub>3</sub> as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi<sub>0.4985</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> Mg<sub>0.0015</sub>O<sub>2</sub> cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm<sup>3</sup>. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance.
文摘Electrochemical impedance spectroscopy was employed to investigate the permeation of electrolyte ions in thioctic acid self-assembled monolayer when its structure was changed by the interaction of copper ions. The ion permeation was evaluated by using relatively low excitation frequencies, 0.2 Hz to 1000 Hz, and quantified by an extra resistive component in the equivalent circuit (RSAM). The extent of ion permeation affected by the electrode potentials and the electrolyte concentration were investigated. The experimental results verified that RSAM decreased ~70% by interaction with copper ions and that RSAM increased ~2 - 3 times when the electrolyte concentration was decreased by 10 times. This analysis can be performed without addition of redox species.
