Occasionally, the Whipple shields are used for the protection of a space station and a satellite against the meteoroids and orbital debris. In the Whipple shields each layer of the shield depletes part of high speed p...Occasionally, the Whipple shields are used for the protection of a space station and a satellite against the meteoroids and orbital debris. In the Whipple shields each layer of the shield depletes part of high speed projectile en- ergy either by breaking the projectile or absorbing its energy. Similarly, this investigation uses the Whipple shields against the shaped charge to protect the light armour such as infantry fighting vehicles with a little modification in their design. The unsteady multiple interactions of shaped charge jet with the Whipple shield package against the steady homogeneous target is scrutinized to optimize the shield thickness. Sim- ulations indicate that the shield thickness of 0.75 mm offers an optimum configuration against the shaped charge. Exper- iments also support this evidence.展开更多
Single point incremental forming(SPIF)is an innovative sheet forming process with a high economic pay-off.The formability in this process can be maximized by executing forming with a tool of specific small radius,rega...Single point incremental forming(SPIF)is an innovative sheet forming process with a high economic pay-off.The formability in this process can be maximized by executing forming with a tool of specific small radius,regarded as threshold critical radius.Its value has been reported as 2.2 mm for 1 mm thick sheet materials.However,with a change in the forming conditions specifically in the sheet thickness and step size,the critical radius is likely to alter due to a change in the bending condition.The main aim of the present study is to undertake this point into account and develop a relatively generic condition.The study is composed of experimental and numerical investigations.The maximum wall angle(θmax)without sheet fracturing is regarded as sheet formability.A number of sheet materials are formed to fracture and the trends correlating formability with normalized radius(i.e.,R/To where R is the tool-radius and To is the sheet thickness)are drawn.These trends confirm that there is a critical tool-radius(Rc)that maximizes the formability in SPIF.Furthermore,it is found that the critical radius is not fixed rather it shows dependence on the sheet thickness such that Rc=βTo,whereβvaries from 2.2 to 3.3 as the thickness increases from 1 mm to 3 mm.The critical radius,however,remains insensitive to variation in step size ranging from 0.3 mm to 0.7 mm.This is also observed that the selection of tool with R<Rc narrows down the formability window not only on the higher side but also on the lower side.The higher limit,as revealed by the experimental and FEA results,diminishes due to excessive shearing because of in-plane biaxial compression,and the lower limit reduces due to pillowing in the bottom of part.The new tool-radius condition proposed herein study would be helpful in maximizing the formability of materials in SPIF without performing experimental trials.展开更多
A new measurement of the reactor antineutrino flux and energy spectrum by the Daya Bay reactor neutrino experiment is reported. The antineutrinos were generated by six 2.9 GWth nuclear reactors and detected by eight a...A new measurement of the reactor antineutrino flux and energy spectrum by the Daya Bay reactor neutrino experiment is reported. The antineutrinos were generated by six 2.9 GWth nuclear reactors and detected by eight antineutrino detectors deployed in two near（560 m and 600 m flux-weighted baselines） and one far（1640 m flux-weighted baseline） underground experimental halls. With 621 days of data, more than 1.2 million inverse beta decay（IBD） candidates were detected. The IBD yield in the eight detectors was measured, and the ratio of measured to predicted flux was found to be 0.946±0.020（0.992±0.021） for the Huber＋Mueller（ILL＋Vogel） model. A 2.9σ deviation was found in the measured IBD positron energy spectrum compared to the predictions. In particular, an excess of events in the region of 4–6 MeV was found in the measured spectrum, with a local significance of 4.4σ. A reactor antineutrino spectrum weighted by the IBD cross section is extracted for model-independent predictions.展开更多
文摘Occasionally, the Whipple shields are used for the protection of a space station and a satellite against the meteoroids and orbital debris. In the Whipple shields each layer of the shield depletes part of high speed projectile en- ergy either by breaking the projectile or absorbing its energy. Similarly, this investigation uses the Whipple shields against the shaped charge to protect the light armour such as infantry fighting vehicles with a little modification in their design. The unsteady multiple interactions of shaped charge jet with the Whipple shield package against the steady homogeneous target is scrutinized to optimize the shield thickness. Sim- ulations indicate that the shield thickness of 0.75 mm offers an optimum configuration against the shaped charge. Exper- iments also support this evidence.
基金Fundamental Research Funds for the Central Universities[Grant No.NS2015055 and No.NP2020413]High-End Foreign Experts Project with Universities Directly under the Administration of Ministries and Commissions of the Central Government[Grant No.011951G19061]+1 种基金National Natural Science Foundation of China[Grant No.51105202]the Deanship of Scientific Research at King Saud University for funding this work through research group number RG-1439-027.
文摘Single point incremental forming(SPIF)is an innovative sheet forming process with a high economic pay-off.The formability in this process can be maximized by executing forming with a tool of specific small radius,regarded as threshold critical radius.Its value has been reported as 2.2 mm for 1 mm thick sheet materials.However,with a change in the forming conditions specifically in the sheet thickness and step size,the critical radius is likely to alter due to a change in the bending condition.The main aim of the present study is to undertake this point into account and develop a relatively generic condition.The study is composed of experimental and numerical investigations.The maximum wall angle(θmax)without sheet fracturing is regarded as sheet formability.A number of sheet materials are formed to fracture and the trends correlating formability with normalized radius(i.e.,R/To where R is the tool-radius and To is the sheet thickness)are drawn.These trends confirm that there is a critical tool-radius(Rc)that maximizes the formability in SPIF.Furthermore,it is found that the critical radius is not fixed rather it shows dependence on the sheet thickness such that Rc=βTo,whereβvaries from 2.2 to 3.3 as the thickness increases from 1 mm to 3 mm.The critical radius,however,remains insensitive to variation in step size ranging from 0.3 mm to 0.7 mm.This is also observed that the selection of tool with R<Rc narrows down the formability window not only on the higher side but also on the lower side.The higher limit,as revealed by the experimental and FEA results,diminishes due to excessive shearing because of in-plane biaxial compression,and the lower limit reduces due to pillowing in the bottom of part.The new tool-radius condition proposed herein study would be helpful in maximizing the formability of materials in SPIF without performing experimental trials.
基金Supported in part by the Ministry of Science and Technology of Chinathe United States Department of Energy,the Chinese Academy of Sciences+11 种基金the CAS Center for Excellence in Particle Physicsthe National Natural Science Foundation of Chinathe Guangdong provincial governmentthe Shenzhen municipal governmentthe China General Nuclear Power Groupthe Research Grants Council of the Hong Kong Special Administrative Region of Chinathe MOST and MOE in Taiwanthe U.S.National Science Foundationthe Ministry of Education,Youth and Sports of the Czech Republicthe Joint Institute of Nuclear Research in Dubna,Russiathe NSFC-RFBR joint research programthe National Commission for Scientific and Technological Research of Chile
文摘A new measurement of the reactor antineutrino flux and energy spectrum by the Daya Bay reactor neutrino experiment is reported. The antineutrinos were generated by six 2.9 GWth nuclear reactors and detected by eight antineutrino detectors deployed in two near（560 m and 600 m flux-weighted baselines） and one far（1640 m flux-weighted baseline） underground experimental halls. With 621 days of data, more than 1.2 million inverse beta decay（IBD） candidates were detected. The IBD yield in the eight detectors was measured, and the ratio of measured to predicted flux was found to be 0.946±0.020（0.992±0.021） for the Huber＋Mueller（ILL＋Vogel） model. A 2.9σ deviation was found in the measured IBD positron energy spectrum compared to the predictions. In particular, an excess of events in the region of 4–6 MeV was found in the measured spectrum, with a local significance of 4.4σ. A reactor antineutrino spectrum weighted by the IBD cross section is extracted for model-independent predictions.
