The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means o...The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.展开更多
Decomposition of lead sulfide concentrates in nitric acidic solutions after ferric (Ⅲ) nitrate addition and mechanical preparation has been investigated. It was found out that the decomposition can be achieved in HNO...Decomposition of lead sulfide concentrates in nitric acidic solutions after ferric (Ⅲ) nitrate addition and mechanical preparation has been investigated. It was found out that the decomposition can be achieved in HNO3 solution (>1.5 mol·L^-1) at the temperature above 85℃. The leaching rate of lead can be increased by means of mechanochemical activation. The use of [Fe(NO3)3-HNO3-H2O] aqueous salt system allows the decomposition of lead sulfide concentrate at room temperature and in this case the concentration of HNO3 does not exceed 0.05-0.1 mol.L^-1, The degree of lead recovery into solution from PbS concentrate reaches 99.3%-99.6c70 with the mechanochemical activation of this concentrate. The insoluble residues after the leaching contain SiO2, S^0, FeCO3 and PbSO4.展开更多
The gold sorption from thiosulphate solutions on carbon sorbents and on anion exchangers was studied. It was shown that the anion exchangers AV-17-10P and AP-100 are the most effective and selective at pH=5-8. These a...The gold sorption from thiosulphate solutions on carbon sorbents and on anion exchangers was studied. It was shown that the anion exchangers AV-17-10P and AP-100 are the most effective and selective at pH=5-8. These anion exchangers can be recommended for the gold recovery from the industrial solutions.展开更多
文摘The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.
文摘Decomposition of lead sulfide concentrates in nitric acidic solutions after ferric (Ⅲ) nitrate addition and mechanical preparation has been investigated. It was found out that the decomposition can be achieved in HNO3 solution (>1.5 mol·L^-1) at the temperature above 85℃. The leaching rate of lead can be increased by means of mechanochemical activation. The use of [Fe(NO3)3-HNO3-H2O] aqueous salt system allows the decomposition of lead sulfide concentrate at room temperature and in this case the concentration of HNO3 does not exceed 0.05-0.1 mol.L^-1, The degree of lead recovery into solution from PbS concentrate reaches 99.3%-99.6c70 with the mechanochemical activation of this concentrate. The insoluble residues after the leaching contain SiO2, S^0, FeCO3 and PbSO4.
文摘The gold sorption from thiosulphate solutions on carbon sorbents and on anion exchangers was studied. It was shown that the anion exchangers AV-17-10P and AP-100 are the most effective and selective at pH=5-8. These anion exchangers can be recommended for the gold recovery from the industrial solutions.
