期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
INFLUENCE OF ZIRCONIUM ON MICROSTRUCTURE AND DAMPING CAPACITY OF ZA27 ALLOY
1
作者 J.C.Wang Z.M.Zhang +2 位作者 Y.L.Lu g.s.song G.C.Yang 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 1998年第3期230-234,共5页
To improve the damping capacities of metals and alloys, the microstructures and damping capacities of ZA27 alloy modified by Zr were studied, and the damping capacities at room tempemture were measured by using cantil... To improve the damping capacities of metals and alloys, the microstructures and damping capacities of ZA27 alloy modified by Zr were studied, and the damping capacities at room tempemture were measured by using cantilever beam techniques. The experiment results show that Zr can refine the Al-rich primary phase and improve the damping Capacities saliently. Compared with the un-modified one, the damping capacity of ZA27 alloy modified by 0.3wt%Zr received 90 percent increment. The high damping capacities are attributed primarily to grain ablement and the increasing of phase interfaces. 展开更多
关键词 ZA27 alloy damping capacity MODIFICATION MICROSTRUCTURE
下载PDF
Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging 被引量:4
2
作者 S.S.A.Shah D.Wu +1 位作者 R.S.Chen g.s.song 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2020年第2期243-251,共9页
A high strain rate multi-directional impact forging(MDIF) was applied to a solutionized Mg-Gd-Y-Zr alloy in the temperature range of 350-500℃.Results demonstrate that the dominant deformation mode is twinning at a te... A high strain rate multi-directional impact forging(MDIF) was applied to a solutionized Mg-Gd-Y-Zr alloy in the temperature range of 350-500℃.Results demonstrate that the dominant deformation mode is twinning at a temperature below 400℃,whereas at a medium temperature of 450℃ considerable continuous dynamic recrystallization was promoted by{10-12} extension twins.At a higher temperature of 500℃,twinning activation was suppressed.New DRX grains were observed but their sizes were much bigger than those resulting from the MDIFed 50 passes at 450℃,which are ascribed to the larger grain boundary mobility and atomic diffusion at 500℃.Moreover,a non-basal weak texture was gained afterward MDIF at each temperature,which is credited to the MDIF process and the minor strain applied in each pass. 展开更多
关键词 MAGNESIUM alloys TWINNING Dynamic RECRYSTALLIZATION FORGING Texture
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部