基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信...基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信号参数对检测范围和精度的影响;其次,根据光伏电池的动态模型和排布规律,搭建光伏阵列故障检测仿真平台,通过断路故障仿真实验对结果进行验证,结果表明,改善信号能有效增强相关峰辨识能力,使光伏组件检测数量增加4块;最后,综合考虑检测盲区和衰减特性对检测性能的影响,提出基于SSTDR的光伏阵列故障检测信号选择策略,用以确定测距范围和最优信号参数。展开更多
The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine (MICSE). The objective of this paper is to investigate the constant spee...The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine (MICSE). The objective of this paper is to investigate the constant speed control models of four-stroke MICSE The operation principle of the four-stroke MICSE is presented based on the description of MICSE prototype. A two-level Petri net based hybrid mode/ is proposed to mode/ the four-stroke MICSE engine cycle. The Petri net subsystem at the upper level controls and synchronizes the four Petri net subsystems at the lower level. The continuous sub-models, including breathing dynamics of intake manifold, thermodynamics of the chamber and dynamics of the torque generation, are investigated and integrated with the discrete model in MATLAB Simulink. Through the comparison of experimental data and simulated DC voltage output, it is demonstrated that the hybrid model is valid for the four-stroke MICSE system. A nonlinear model is obtained from the cycle average data via the regression method, and it is linearized around a given nominal equilibrium point for the controller design. The feedback controller of the spark timing and valve duration timing is designed with a sequential loop closing design approach. The simulation of the sequential loop closure control design applied to the hybrid model is implemented in MATLAB. The simulation results show that the system is able to reach its desired operating point within 0.2 s, and the designed controller shows good MICSE engine performance with a constant speed. This paper presents the constant speed control models of four-stroke MICSE and carries out the simulation tests, the models and the simulation results can be used for further study on the precision control of four-stroke MICSE.展开更多
The needle placement accuracy of millimeters is required in many needle-based surgeries. The tissue deformation, especially that occurring on the surface of organ tissue, affects the needle-targeting accuracy of both ...The needle placement accuracy of millimeters is required in many needle-based surgeries. The tissue deformation, especially that occurring on the surface of organ tissue, affects the needle-targeting accuracy of both manual and robotic needle insertions. It is necessary to understand the mechanism of tissue deformation during needle insertion into soft tissue. In this paper, soft tissue surface deformation is investigated on the basis of continuum mechanics, where a geometry model is presented to quantitatively approximate the volume of tissue deformation. The energy-based method is presented to the dynamic process of needle insertion into soft tissue based on continuum mechanics, and the volume of the cone is exploited to quantitatively approximate the deformation on the surface of soft tissue. The external work is converted into potential, kinetic, dissipated, and strain energies during the dynamic rigid needle-tissue interactive process. The needle insertion experimental setup, consisting of a linear actuator, force sensor, needle, tissue container, and a light, is constructed while an image-based method for measuring the depth and radius of the soft tissue surface deformations is introduced to obtain the experimental data. The relationship between the changed volume of tissue deformation and the insertion parameters is created based on the law of conservation of energy, with the volume of tissue deformation having been obtained using image-based measurements. The experiments are performed on phantom specimens, and an energy-based analytical fitted model is presented to estimate the volume of tissue deformation. The experimental results show that the energy-based analytical fitted model can predict the volume of soft tissue deformation, and the root mean squared errors of the fitting model and experimental data are 0.61 and 0.25 at the velocities 2.50 mm/s and 5.00 mm/s. The estimating parameters of the soft tissue surface deformations are proven to be useful for compensating the needle-targeting error in the rigid needle insertion procedure, especially for percutaneous needle insertion into organs.展开更多
Needle insertion is a common surgical procedure used in diagnosis and treatment.The needle steering technologies make continuous developments in theoretical and practical aspects along with the in-depth research on ne...Needle insertion is a common surgical procedure used in diagnosis and treatment.The needle steering technologies make continuous developments in theoretical and practical aspects along with the in-depth research on needle insertion.It is necessary to summarize and analyze the existing results to promote the future development of theories and applications of needle insertion.Thus,a survey of the state of the art of research is presented on algorithms of needle steering techniques,the surgical robots and devices.Based on the analysis of the needle insertion procedure,the concept of needle steering is defined as a kinematics problem,which is to place the needle at the target and avoid the obstacles.The needle steering techniques,including the artificial potential field method and the nonholonomic model,are introduced to control the needles for improving the accuracy.Based on the quasi-static thinking,the virtual spring model and the cantilever-beam model are developed to calculate the amount of needle deflection and generate the needle path.The phantoms instead of the real tissue are used to verify the models mentioned in most of the experimentations.For the desired needle trajectories,the image-guided robotic devices and some novel needles are presented to achieve the needle steering.Finally,the challenges are provided involving the controllability of the long flexible needle and the properties of soft tissue.The results and investigations can be used for further study on the precision and accuracy of needle insertion.展开更多
文摘基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信号参数对检测范围和精度的影响;其次,根据光伏电池的动态模型和排布规律,搭建光伏阵列故障检测仿真平台,通过断路故障仿真实验对结果进行验证,结果表明,改善信号能有效增强相关峰辨识能力,使光伏组件检测数量增加4块;最后,综合考虑检测盲区和衰减特性对检测性能的影响,提出基于SSTDR的光伏阵列故障检测信号选择策略,用以确定测距范围和最优信号参数。
基金Supported by National Natural Science Foundation of China(Grant No.51475422)Science Fund for Creative Research Groups of National Natural Science Foundation of China(Grant No.51221004)
文摘The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine (MICSE). The objective of this paper is to investigate the constant speed control models of four-stroke MICSE The operation principle of the four-stroke MICSE is presented based on the description of MICSE prototype. A two-level Petri net based hybrid mode/ is proposed to mode/ the four-stroke MICSE engine cycle. The Petri net subsystem at the upper level controls and synchronizes the four Petri net subsystems at the lower level. The continuous sub-models, including breathing dynamics of intake manifold, thermodynamics of the chamber and dynamics of the torque generation, are investigated and integrated with the discrete model in MATLAB Simulink. Through the comparison of experimental data and simulated DC voltage output, it is demonstrated that the hybrid model is valid for the four-stroke MICSE system. A nonlinear model is obtained from the cycle average data via the regression method, and it is linearized around a given nominal equilibrium point for the controller design. The feedback controller of the spark timing and valve duration timing is designed with a sequential loop closing design approach. The simulation of the sequential loop closure control design applied to the hybrid model is implemented in MATLAB. The simulation results show that the system is able to reach its desired operating point within 0.2 s, and the designed controller shows good MICSE engine performance with a constant speed. This paper presents the constant speed control models of four-stroke MICSE and carries out the simulation tests, the models and the simulation results can be used for further study on the precision control of four-stroke MICSE.
基金Supported by National Natural Science Foundation of China(Grant No.51665049,51165040)Science Fund for Creative Research Groups of National Natural Science Foundation of China(Grant No.51521064)Qinghai Provincial Natural Science Foundation of China(Grant No.2015-ZJ-906)
文摘The needle placement accuracy of millimeters is required in many needle-based surgeries. The tissue deformation, especially that occurring on the surface of organ tissue, affects the needle-targeting accuracy of both manual and robotic needle insertions. It is necessary to understand the mechanism of tissue deformation during needle insertion into soft tissue. In this paper, soft tissue surface deformation is investigated on the basis of continuum mechanics, where a geometry model is presented to quantitatively approximate the volume of tissue deformation. The energy-based method is presented to the dynamic process of needle insertion into soft tissue based on continuum mechanics, and the volume of the cone is exploited to quantitatively approximate the deformation on the surface of soft tissue. The external work is converted into potential, kinetic, dissipated, and strain energies during the dynamic rigid needle-tissue interactive process. The needle insertion experimental setup, consisting of a linear actuator, force sensor, needle, tissue container, and a light, is constructed while an image-based method for measuring the depth and radius of the soft tissue surface deformations is introduced to obtain the experimental data. The relationship between the changed volume of tissue deformation and the insertion parameters is created based on the law of conservation of energy, with the volume of tissue deformation having been obtained using image-based measurements. The experiments are performed on phantom specimens, and an energy-based analytical fitted model is presented to estimate the volume of tissue deformation. The experimental results show that the energy-based analytical fitted model can predict the volume of soft tissue deformation, and the root mean squared errors of the fitting model and experimental data are 0.61 and 0.25 at the velocities 2.50 mm/s and 5.00 mm/s. The estimating parameters of the soft tissue surface deformations are proven to be useful for compensating the needle-targeting error in the rigid needle insertion procedure, especially for percutaneous needle insertion into organs.
基金supported by National Natural Science Foundation of China (Grant Nos. 51165040,50775119)Visiting Scholar Foundation of Key Lab in University of China (Grant No. GZKF-201020)
文摘Needle insertion is a common surgical procedure used in diagnosis and treatment.The needle steering technologies make continuous developments in theoretical and practical aspects along with the in-depth research on needle insertion.It is necessary to summarize and analyze the existing results to promote the future development of theories and applications of needle insertion.Thus,a survey of the state of the art of research is presented on algorithms of needle steering techniques,the surgical robots and devices.Based on the analysis of the needle insertion procedure,the concept of needle steering is defined as a kinematics problem,which is to place the needle at the target and avoid the obstacles.The needle steering techniques,including the artificial potential field method and the nonholonomic model,are introduced to control the needles for improving the accuracy.Based on the quasi-static thinking,the virtual spring model and the cantilever-beam model are developed to calculate the amount of needle deflection and generate the needle path.The phantoms instead of the real tissue are used to verify the models mentioned in most of the experimentations.For the desired needle trajectories,the image-guided robotic devices and some novel needles are presented to achieve the needle steering.Finally,the challenges are provided involving the controllability of the long flexible needle and the properties of soft tissue.The results and investigations can be used for further study on the precision and accuracy of needle insertion.