A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- stru...A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- structure, mechanical and corrosion properties of these alloys. The results show that these alloys have a balanced ferrite-austenite relation. In addition, the alloys are free of precipitation of sigma phase and Cr-nitride when solution- treated at 750 to 1300℃ for 30 min. The yield strength, tensile strength and fracture elongation values of experi- mental alloys solution-treated at 1050 ℃ for 30 min are about 500, 750 MPa and 40.0%, respectively. Low-temper- ature impact properties can be improved distinctly with the increase of nickel content. Among the designed DSS al- loys, the alloy with Ni of 2.0% is found to be an optimum alloy with proper phase proportion, better low-tempera- ture impact properties and higher pitting corrosion resistance compared with those o~ other alloys. The mechanical and corrosion properties and lower production cost of the designed DSSs are better than those of AISI 304.展开更多
A new family of resource saving, high chromium and manganese super duplex stainless steels （DSSs）, with a composition in mass percent, % of Cr 0.29, Mn 0.12, Ni 2.0, Mo i. 0, and N 0. 51-0. 68, has been developed by...A new family of resource saving, high chromium and manganese super duplex stainless steels （DSSs）, with a composition in mass percent, % of Cr 0.29, Mn 0.12, Ni 2.0, Mo i. 0, and N 0. 51-0. 68, has been developed by examining the effect of N on the microstructure, mechanical properties and corrosion properties. The results show that these alloys have a balanced ferrite-austenite relation. The austenite volume fraction decreases with the solution treatment temperature, but it increases with an increase in N content. The increases in nitrogen enhance the ultimate tensile strength （UTS） and reduce the ductility of the material slightly. The pitting corrosion potential increases first and then decreases with an increase in nitrogen content when the amount of N arrives to 0.68%. The yield stress and ultimate tensile strength of solution treated samples were more than 680 and 900 MPa, the elongation of experimental alloys are higher than 30%, respectively, what is more, the pitting potentials were beyond 1 100 mV.展开更多
The acid dissociation constants of N-carboxymethyl-N-(p-hydroxy phenyl carbamoyl- methyl)-2,3-dihydroxy-5-carbomethoxy benzylamine(CHDCB) and the stability constants of its 1:1 complexes with alkaline earth, Cd(Ⅱ), ...The acid dissociation constants of N-carboxymethyl-N-(p-hydroxy phenyl carbamoyl- methyl)-2,3-dihydroxy-5-carbomethoxy benzylamine(CHDCB) and the stability constants of its 1:1 complexes with alkaline earth, Cd(Ⅱ), Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), Zn(Ⅱ), Fe(Ⅲ),Th(Ⅳ)and U(Ⅵ)ions have been determined at 25.0±0.1℃ and at an ionic strength of 0.1(KNO_3)by pH titration method. The probable coordination sites have also been discussed.展开更多
基金Sponsored by Innovation Fund of Education Commission of Shanghai Municipality of China (09yz20)
文摘A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composi- tion of 22Cr-8.0Mn-xNi-1.0Mo-0.7Cu-0.7W-0.3N （x = 0.5 -- 2.0） have been developed by examining the micro- structure, mechanical and corrosion properties of these alloys. The results show that these alloys have a balanced ferrite-austenite relation. In addition, the alloys are free of precipitation of sigma phase and Cr-nitride when solution- treated at 750 to 1300℃ for 30 min. The yield strength, tensile strength and fracture elongation values of experi- mental alloys solution-treated at 1050 ℃ for 30 min are about 500, 750 MPa and 40.0%, respectively. Low-temper- ature impact properties can be improved distinctly with the increase of nickel content. Among the designed DSS al- loys, the alloy with Ni of 2.0% is found to be an optimum alloy with proper phase proportion, better low-tempera- ture impact properties and higher pitting corrosion resistance compared with those o~ other alloys. The mechanical and corrosion properties and lower production cost of the designed DSSs are better than those of AISI 304.
基金Item Sponsored by Innovation Fund of Education Commission of Shanghai Municipality of China(09yz20)
文摘A new family of resource saving, high chromium and manganese super duplex stainless steels （DSSs）, with a composition in mass percent, % of Cr 0.29, Mn 0.12, Ni 2.0, Mo i. 0, and N 0. 51-0. 68, has been developed by examining the effect of N on the microstructure, mechanical properties and corrosion properties. The results show that these alloys have a balanced ferrite-austenite relation. The austenite volume fraction decreases with the solution treatment temperature, but it increases with an increase in N content. The increases in nitrogen enhance the ultimate tensile strength （UTS） and reduce the ductility of the material slightly. The pitting corrosion potential increases first and then decreases with an increase in nitrogen content when the amount of N arrives to 0.68%. The yield stress and ultimate tensile strength of solution treated samples were more than 680 and 900 MPa, the elongation of experimental alloys are higher than 30%, respectively, what is more, the pitting potentials were beyond 1 100 mV.
文摘The acid dissociation constants of N-carboxymethyl-N-(p-hydroxy phenyl carbamoyl- methyl)-2,3-dihydroxy-5-carbomethoxy benzylamine(CHDCB) and the stability constants of its 1:1 complexes with alkaline earth, Cd(Ⅱ), Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), Zn(Ⅱ), Fe(Ⅲ),Th(Ⅳ)and U(Ⅵ)ions have been determined at 25.0±0.1℃ and at an ionic strength of 0.1(KNO_3)by pH titration method. The probable coordination sites have also been discussed.
