Based on the optical engine,the ignition characteristics,combustion process and soot emission characteristics of diesel under different 2-Methylfuran(MF) atmospheres were investigated by high-speed photography and in-...Based on the optical engine,the ignition characteristics,combustion process and soot emission characteristics of diesel under different 2-Methylfuran(MF) atmospheres were investigated by high-speed photography and in-cylinder combustion analysis technology.The results show that at the same main injection timing,the ignition time of reactivity controlled compression ignition(RCCI) combustion mode is earlier than pure diesel combustion,and the ignition point is concentrated near the nozzle.Diesel acts as a spark plug to ignite the mixture,but the flame develops slowly in the early stages and the pressure in the cylinder rises slowly.Compared with pure diesel,RCCI combustion model has smaller peak values of in-cylinder pressure and heat release rate,shorter ignition delay period,earlier combustion phase and shorter combustion duration.At main spray time at 6℃A BTDC and 12℃A BTDC,with the increase of MF premixing ratio from 0 to 0.75,the peak cylinder pressure decreased by 19.6% and 26% respectively.In addition,with the increase of the MF heat value ratio,the area of KL factor> 1.5 in the combustion chamber decreased and the space integral natural luminescence(SINL) peak value decreased by 48.37%,and the soot formation rate and yield decreased significantly.However,when the MF heat value ratio was too large(75% of the total calorific value),the ignition delay period increased,and misfire occurred at the main injection timing of 0℃A BTDC.The RCCI mode of MF/diesel dual fuel has better stability,and better control effect can be obtained at different main inj ection timing.展开更多
基金the financial support of the Key Scientific Research Projects of Colleges and Universities in Henan Province (No.21B470002)。
文摘Based on the optical engine,the ignition characteristics,combustion process and soot emission characteristics of diesel under different 2-Methylfuran(MF) atmospheres were investigated by high-speed photography and in-cylinder combustion analysis technology.The results show that at the same main injection timing,the ignition time of reactivity controlled compression ignition(RCCI) combustion mode is earlier than pure diesel combustion,and the ignition point is concentrated near the nozzle.Diesel acts as a spark plug to ignite the mixture,but the flame develops slowly in the early stages and the pressure in the cylinder rises slowly.Compared with pure diesel,RCCI combustion model has smaller peak values of in-cylinder pressure and heat release rate,shorter ignition delay period,earlier combustion phase and shorter combustion duration.At main spray time at 6℃A BTDC and 12℃A BTDC,with the increase of MF premixing ratio from 0 to 0.75,the peak cylinder pressure decreased by 19.6% and 26% respectively.In addition,with the increase of the MF heat value ratio,the area of KL factor> 1.5 in the combustion chamber decreased and the space integral natural luminescence(SINL) peak value decreased by 48.37%,and the soot formation rate and yield decreased significantly.However,when the MF heat value ratio was too large(75% of the total calorific value),the ignition delay period increased,and misfire occurred at the main injection timing of 0℃A BTDC.The RCCI mode of MF/diesel dual fuel has better stability,and better control effect can be obtained at different main inj ection timing.