Yellowish nitrogen-doped titania was produced through sol-gel method in mild condition, with the elemental nitrogen derived from aqua ammonia. The titania catalysts were characterized using XRD, BET, TEM, XPS, and UV-...Yellowish nitrogen-doped titania was produced through sol-gel method in mild condition, with the elemental nitrogen derived from aqua ammonia. The titania catalysts were characterized using XRD, BET, TEM, XPS, and UV-Vis diffuse reflectance spectrophotometer, and their photocatalytic activities were evaluated under UV and visible light, respec tively. The XRD results showed that all titania catalysts were anatase. More significantly, the crystallite size of nitrogen-doped titania increased with an increase in N/Ti proportion, and the doping of nitrogen could extend the absorption shoulder into the visible-light region, thus it possessed a higher visible-light activity illustrated by decolorization of methyl orange (65.3%) under the irradiation of visible light, whereas pure titania showed little of such kind of visible light activity. The UV-light activity of nitrogen-doped titania catalysts was worse than that of pure titania and Degussa P25. In the range of N/Ti proportion of 4-10 mol%, the activity of nitrogen-doped titania weakened appreciably in the visible-light region as the N/Ti proportion increased, whereas a reverse relationship existed under the irradiation of UV light.展开更多
Platinum, palladium and rhodium of the raw feeds extracted and separated with a new sulfoxide extractant (MSO) were studied in the paper. The pilot test results showed that the percentage extractions are more than 9...Platinum, palladium and rhodium of the raw feeds extracted and separated with a new sulfoxide extractant (MSO) were studied in the paper. The pilot test results showed that the percentage extractions are more than 99% for platinum and palladium in Pt-Pd feed, and the percentage strippings are 100% and 99.2% with HCl and ammonia, respectively. The ratio of palladium to platinum is 0.0016 in stripping platinum solution, and the ratio of platinum to palladium is 0.0020 in stripping palladium solution. The percentage extraction of platinum is 99% in Pt-Rh feed, and the percentage stripping is 100%. The ratio of rhodium to platinum is 0.0002 in stripping platinum solution. Therefore, platinum, palladium, and rhodium feeds are separated effectively with MSO.展开更多
基金the Open Fund of the Key Laboratory of Enhanced Heat and Energy Conservation of Chinese Ministry of Education, South China University of Technology.
文摘Yellowish nitrogen-doped titania was produced through sol-gel method in mild condition, with the elemental nitrogen derived from aqua ammonia. The titania catalysts were characterized using XRD, BET, TEM, XPS, and UV-Vis diffuse reflectance spectrophotometer, and their photocatalytic activities were evaluated under UV and visible light, respec tively. The XRD results showed that all titania catalysts were anatase. More significantly, the crystallite size of nitrogen-doped titania increased with an increase in N/Ti proportion, and the doping of nitrogen could extend the absorption shoulder into the visible-light region, thus it possessed a higher visible-light activity illustrated by decolorization of methyl orange (65.3%) under the irradiation of visible light, whereas pure titania showed little of such kind of visible light activity. The UV-light activity of nitrogen-doped titania catalysts was worse than that of pure titania and Degussa P25. In the range of N/Ti proportion of 4-10 mol%, the activity of nitrogen-doped titania weakened appreciably in the visible-light region as the N/Ti proportion increased, whereas a reverse relationship existed under the irradiation of UV light.
文摘Platinum, palladium and rhodium of the raw feeds extracted and separated with a new sulfoxide extractant (MSO) were studied in the paper. The pilot test results showed that the percentage extractions are more than 99% for platinum and palladium in Pt-Pd feed, and the percentage strippings are 100% and 99.2% with HCl and ammonia, respectively. The ratio of palladium to platinum is 0.0016 in stripping platinum solution, and the ratio of platinum to palladium is 0.0020 in stripping palladium solution. The percentage extraction of platinum is 99% in Pt-Rh feed, and the percentage stripping is 100%. The ratio of rhodium to platinum is 0.0002 in stripping platinum solution. Therefore, platinum, palladium, and rhodium feeds are separated effectively with MSO.