Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubricat...Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubrication.Bionic models of regular hexagonal convex texture and circular concave texture inspired by the beetle were established and verified by numerical calculations and simulations.Further tribological experiments were performed and the results show that the circle texture has the lowest coefficient,which is consistent with the numerical calculations.The research may be further applied to new bionic surface texture designs and also work as a biological template for new bionic inventions.展开更多
为了提升电火花线切割(Wire cut Electric Discharge Machining,WEDM)加工后的TC4钛合金表面质量,减少表面重熔层厚度,采用不同浓度配比(1∶4、1∶6和1∶8)的HF-HNO_(3)酸蚀溶液对钛合金试件进行化学抛光处理。实验结果表明,HF-HNO_(3)...为了提升电火花线切割(Wire cut Electric Discharge Machining,WEDM)加工后的TC4钛合金表面质量,减少表面重熔层厚度,采用不同浓度配比(1∶4、1∶6和1∶8)的HF-HNO_(3)酸蚀溶液对钛合金试件进行化学抛光处理。实验结果表明,HF-HNO_(3)酸蚀溶液能使钛合金重熔层得到显著去除,表面微裂纹得到有效控制;当HF-HNO_(3)酸蚀溶液的浓度配比为1:6时,试件能获得最低的表面粗糙度和最大的表面粗糙度下降率,并且抛光前后钛合金表面元素含量发生了不同程度的变化,Ti、Al和V元素质量分数分别提高了21.5%、41.3%和13.2%,而O、C元素质量分数分别降低了82.5%和33.6%;HF-HNO_(3)酸蚀溶液可显著改善TC4钛合金试件电火花线切割加工后的表面缺陷。钛合金重熔层结构的主要成分与化学抛光后氧化膜的主要成分相似,但与氧化膜的结构不同,这对TC4钛合金试件表面质量提升具有重要意义。展开更多
基金supported in part by the National Natural Science Foundation of China(Nos.51175249,51475230)
文摘Super depth digital microscope was employed to observe the macro-/micro-structure of Coleoptera's elytra.The non-smooth surface textures of elytra have shown superior performance of friction reduction and lubrication.Bionic models of regular hexagonal convex texture and circular concave texture inspired by the beetle were established and verified by numerical calculations and simulations.Further tribological experiments were performed and the results show that the circle texture has the lowest coefficient,which is consistent with the numerical calculations.The research may be further applied to new bionic surface texture designs and also work as a biological template for new bionic inventions.
文摘为了提升电火花线切割(Wire cut Electric Discharge Machining,WEDM)加工后的TC4钛合金表面质量,减少表面重熔层厚度,采用不同浓度配比(1∶4、1∶6和1∶8)的HF-HNO_(3)酸蚀溶液对钛合金试件进行化学抛光处理。实验结果表明,HF-HNO_(3)酸蚀溶液能使钛合金重熔层得到显著去除,表面微裂纹得到有效控制;当HF-HNO_(3)酸蚀溶液的浓度配比为1:6时,试件能获得最低的表面粗糙度和最大的表面粗糙度下降率,并且抛光前后钛合金表面元素含量发生了不同程度的变化,Ti、Al和V元素质量分数分别提高了21.5%、41.3%和13.2%,而O、C元素质量分数分别降低了82.5%和33.6%;HF-HNO_(3)酸蚀溶液可显著改善TC4钛合金试件电火花线切割加工后的表面缺陷。钛合金重熔层结构的主要成分与化学抛光后氧化膜的主要成分相似,但与氧化膜的结构不同,这对TC4钛合金试件表面质量提升具有重要意义。
