Parameter sensitivities analysis for classical flutter speed of a horizontal axis wind turbine blade

The parameter sensitivities affecting the flutter speed of the NREL （National Renewable Energy Laboratory） 5-MW baseline HAWT （horizontal axis wind turbine） blades are analyzed. An aeroelastic model, which comprises an aerodynamic part to calculate the aerodynamic loads and a structural part to determine the structural dynamic responses, is established to describe the classical flutter of the blades. For the aerodynamic part, Theodorsen unsteady aerodynamics model is used. For the structural part, Lagrange’s equation is employed. The flutter speed is determined by introducing “V–g” method to the aeroelastic model, which converts the issue of classical flutter speed determination into an eigenvalue problem. Furthermore, the time domain aeroelastic response of the wind turbine blade section is obtained with employing Runge-Kutta method. The results show that four cases （i.e., reducing the blade torsional stiffness, moving the center of gravity or the elastic axis towards the trailing edge of the section, and placing the turbine in high air density area） will decrease the flutter speed. Therefore, the judicious selection of the four parameters （the torsional stiffness, the chordwise position of the center of gravity, the elastic axis position and air density） can increase the relative inflow speed at the blade section associated with the onset of flutter.