Owing to its low cost,short process and low energy consumption,semi-solid processing(SSP)of aluminum(Al)and magnesium(Mg)alloys has been considered as a competitive approach to fabricate complicated components with ex...Owing to its low cost,short process and low energy consumption,semi-solid processing(SSP)of aluminum(Al)and magnesium(Mg)alloys has been considered as a competitive approach to fabricate complicated components with excellent performance.Over the past decade,significant progress has been achieved in deeply understanding the SSP process,the microstructure and performance of the fabricated components in China.This paper starts with a retrospective overview of some common slurry preparation methods,followed by presenting the performance and the underlying mechanisms of SSP fabricated alloys.Then,the mainstream opinions on the microstructure evolution and rheological flow behavior of semi-solid slurry are discussed.Subsequently,the general situation and some recent examples of industrial applications of SSP are presented.Finally,special attention is paid to the unresolved issues and the future directions in SSP of Al and Mg alloys in China.展开更多
The additive manufacturing(AM)of Ni-based superalloys has attracted extensive interest from both academia and industry due to its unique capabilities to fabricate complex and high-performance components for use in hig...The additive manufacturing(AM)of Ni-based superalloys has attracted extensive interest from both academia and industry due to its unique capabilities to fabricate complex and high-performance components for use in high-end industrial systems.However,the intense temperature gradient induced by the rapid heating and cooling processes of AM can generate high levels of residual stress and metastable chemical and structural states,inevitably leading to severe metallurgical defects in Ni-based superalloys.Cracks are the greatest threat to these materials’integrity as they can rapidly propagate and thereby cause sudden and non-predictable failure.Consequently,there is a need for a deeper understanding of residual stress and cracking mechanisms in additively manufactured Ni-based superalloys and ways to potentially prevent cracking,as this knowledge will enable the wider application of these unique materials.To this end,this paper comprehensively reviews the residual stress and the various mechanisms of crack formation in Ni-based superalloys during AM.In addition,several common methods for inhibiting crack formation are presented to assist the research community to develop methods for the fabrication of crack-free additively manufactured components.展开更多
Chronic spinal cord compression(CSCC)is induced by disc herniation and other reasons,leading to movement and sensation dysfunction,with a serious impact on quality of life.Spontaneous disc herniation rarely occurs in ...Chronic spinal cord compression(CSCC)is induced by disc herniation and other reasons,leading to movement and sensation dysfunction,with a serious impact on quality of life.Spontaneous disc herniation rarely occurs in rodents,and therefore establishing a chronic spinal cord compression(CSCC)animal model is of crucial importance to explore the pathogenesis and treatment of CSCC.The absence of secreted protein,acidic,and rich in cysteine(SPARC)leads to spontaneous intervertebral disc degeneration in mice,which resembles human disc degeneration.In this study,we evaluated whether SPARC-null mice may serve as an animal model for CSCC.We performed rod rotation test,pain threshold test,gait analysis,and Basso Mouse Scale score.Our results showed that the motor function of SPARC-null mice was weakened,and magnetic resonance images revealed compression at different spinal cord levels,particularly in the lumbar segments.Immunofluorescence staining and western blot assay showed that the absence of SPARC induced apoptosis of neurons and oligodendrocytes,activation of microglia/macrophages with M1/M2 phenotype and astrocytes with A1/A2 phenotype;it also activated the expression of the NOD-like receptor protein 3 inflammasome and inhibited brain-derived neurotrophic factor/tyrosine kinase B signaling pathway.Notably,these findings are characteristics of CSCC.Therefore,we propose that SPARC-null mice may be an animal model for studying CSCC caused by disc herniation.展开更多
基金financial supports from the Shenzhen Science and Technology Innovation Commission, China (Nos. KQTD20170328154443162, JCYJ20180305123432756)。
文摘Owing to its low cost,short process and low energy consumption,semi-solid processing(SSP)of aluminum(Al)and magnesium(Mg)alloys has been considered as a competitive approach to fabricate complicated components with excellent performance.Over the past decade,significant progress has been achieved in deeply understanding the SSP process,the microstructure and performance of the fabricated components in China.This paper starts with a retrospective overview of some common slurry preparation methods,followed by presenting the performance and the underlying mechanisms of SSP fabricated alloys.Then,the mainstream opinions on the microstructure evolution and rheological flow behavior of semi-solid slurry are discussed.Subsequently,the general situation and some recent examples of industrial applications of SSP are presented.Finally,special attention is paid to the unresolved issues and the future directions in SSP of Al and Mg alloys in China.
基金This work was supported by Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone Shenzhen Park Project:HZQB-KCZYB-2020030the National Natural Science Foundation of China(No.91860131and No.52074157)+2 种基金Guangdong Provincial Department of Science and Technology,Key-Area Research and Development Program of Guangdong Province(No.2020B090923002)the National Key Research and Development Program of China(No.2017YFB0702901)the Shenzhen Science and Technology Innovation Commission(No.JCYJ20170817111811303,No.KQTD20170328154443162and No.ZDSYS201703031748354).
文摘The additive manufacturing(AM)of Ni-based superalloys has attracted extensive interest from both academia and industry due to its unique capabilities to fabricate complex and high-performance components for use in high-end industrial systems.However,the intense temperature gradient induced by the rapid heating and cooling processes of AM can generate high levels of residual stress and metastable chemical and structural states,inevitably leading to severe metallurgical defects in Ni-based superalloys.Cracks are the greatest threat to these materials’integrity as they can rapidly propagate and thereby cause sudden and non-predictable failure.Consequently,there is a need for a deeper understanding of residual stress and cracking mechanisms in additively manufactured Ni-based superalloys and ways to potentially prevent cracking,as this knowledge will enable the wider application of these unique materials.To this end,this paper comprehensively reviews the residual stress and the various mechanisms of crack formation in Ni-based superalloys during AM.In addition,several common methods for inhibiting crack formation are presented to assist the research community to develop methods for the fabrication of crack-free additively manufactured components.
基金supported by the National Natural Science Foundation of China,Nos.82074454(to XJC),82174409(to MY),81930116(to YJW),81873317(to XJC)the National Key R&D Program of China,No.2018YFC1704300(to YJW)the Natural Science Foundation of Shanghai,No.20ZR1459000(to MY)。
文摘Chronic spinal cord compression(CSCC)is induced by disc herniation and other reasons,leading to movement and sensation dysfunction,with a serious impact on quality of life.Spontaneous disc herniation rarely occurs in rodents,and therefore establishing a chronic spinal cord compression(CSCC)animal model is of crucial importance to explore the pathogenesis and treatment of CSCC.The absence of secreted protein,acidic,and rich in cysteine(SPARC)leads to spontaneous intervertebral disc degeneration in mice,which resembles human disc degeneration.In this study,we evaluated whether SPARC-null mice may serve as an animal model for CSCC.We performed rod rotation test,pain threshold test,gait analysis,and Basso Mouse Scale score.Our results showed that the motor function of SPARC-null mice was weakened,and magnetic resonance images revealed compression at different spinal cord levels,particularly in the lumbar segments.Immunofluorescence staining and western blot assay showed that the absence of SPARC induced apoptosis of neurons and oligodendrocytes,activation of microglia/macrophages with M1/M2 phenotype and astrocytes with A1/A2 phenotype;it also activated the expression of the NOD-like receptor protein 3 inflammasome and inhibited brain-derived neurotrophic factor/tyrosine kinase B signaling pathway.Notably,these findings are characteristics of CSCC.Therefore,we propose that SPARC-null mice may be an animal model for studying CSCC caused by disc herniation.