The microstructure,dielectric and ferroelectric properties of(1-y)Ba(Zr0.1Ti0.9)O3-yBa(Zn1/3Nb2/3)O3(y=0-0.05)ceramics prepared by traditional solid state method were investigated by X-ray diffractometer,scanning elec...The microstructure,dielectric and ferroelectric properties of(1-y)Ba(Zr0.1Ti0.9)O3-yBa(Zn1/3Nb2/3)O3(y=0-0.05)ceramics prepared by traditional solid state method were investigated by X-ray diffractometer,scanning electron microscope,electric parameter testing system and ferroelectric tester.It is found that the barium zirconate titanate based ceramics are single-phase perovskites as y increases up to 0.05 and their average grain size decreases with the increase of y.The permittivity maximumεr,max is suppressed from 8948 to 1611 at 1 kHz with increasing y,and the ferroelectric-paraelectric phase transition temperature Tm decreases from 93 to-89℃at 1 kHz as y increases.The composition-induced diffuse phase transition is enhanced with increasingy.The relaxor-like ferroelectric behavior with a strong frequency dispersion of Tm and permittivity at T<Tm accompanied by a strong diffuse phase transition is found for the system with high y value.The remnant polarization decreases with increasing y,while the coercive field decreases remarkably and then increases with the increase of y.展开更多
The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD a...The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD and LCR measure system.It is found that with the increase ofδ,(Ba0.75Sr0.25)Ti1-δO3-2δceramics transform from single phase solid solutions with typical cubic perovskite structure to multiphase compounds while(Ba0.75Sr0.25)Ti0.998O2.996ceramics remain to be single-phase with the increasing Sb2O3content.The distortion of the ABO3perovskite lattice caused by VTi″″and VO..induces the drop of Curie temperature and the rise of relative dielectric constant in(Ba0.75Sr0.25)Ti1-δO3-2δceramics with increasingδvalue.The orientation of VO??elastic dipoles results in the domain-wall pinning and thus the reduction of the dielectric loss.With increasing Sb2O3content,the relative dielectric constant,dielectric constant maximum and Curie temperature of(Ba0.75Sr0.25)Ti0.998O2.996ceramics decrease dramatically while the dielectric loss increases.展开更多
Elastic properties are important in fundamental understanding of multiferroic materials. However, up to now, there is no work about anisotropy of elastic properties in orthorhombic Ca_3Mn_2O_7. In this study, using co...Elastic properties are important in fundamental understanding of multiferroic materials. However, up to now, there is no work about anisotropy of elastic properties in orthorhombic Ca_3Mn_2O_7. In this study, using coordinate transformation method, we investigated basic elastic parameters(elastic constants c'_(ij)) and engineering elastic parameters(Young's modulus E, Poisson's ratio v, and the rigidity modulus G') of orthorhombic Ca_3Mn_2O_7 along arbitrary orientations. The detailed anisotropic characteristics of these parameters were presented. The results reveal the orientation related elastic properties in mm2 point group orthorhombic Ca_3Mn_2O_7.展开更多
基金sponsored by the National Demonstration Center for Experimental Materials Science and Engineering Education (Jiangsu University of Science and Technology, China)the Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions, China
文摘The microstructure,dielectric and ferroelectric properties of(1-y)Ba(Zr0.1Ti0.9)O3-yBa(Zn1/3Nb2/3)O3(y=0-0.05)ceramics prepared by traditional solid state method were investigated by X-ray diffractometer,scanning electron microscope,electric parameter testing system and ferroelectric tester.It is found that the barium zirconate titanate based ceramics are single-phase perovskites as y increases up to 0.05 and their average grain size decreases with the increase of y.The permittivity maximumεr,max is suppressed from 8948 to 1611 at 1 kHz with increasing y,and the ferroelectric-paraelectric phase transition temperature Tm decreases from 93 to-89℃at 1 kHz as y increases.The composition-induced diffuse phase transition is enhanced with increasingy.The relaxor-like ferroelectric behavior with a strong frequency dispersion of Tm and permittivity at T<Tm accompanied by a strong diffuse phase transition is found for the system with high y value.The remnant polarization decreases with increasing y,while the coercive field decreases remarkably and then increases with the increase of y.
基金Project(BK20140517)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(14KJB430011)supported by Jiangsu Provincial Natural Science Foundation for Colleges and Universities,China
文摘The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD and LCR measure system.It is found that with the increase ofδ,(Ba0.75Sr0.25)Ti1-δO3-2δceramics transform from single phase solid solutions with typical cubic perovskite structure to multiphase compounds while(Ba0.75Sr0.25)Ti0.998O2.996ceramics remain to be single-phase with the increasing Sb2O3content.The distortion of the ABO3perovskite lattice caused by VTi″″and VO..induces the drop of Curie temperature and the rise of relative dielectric constant in(Ba0.75Sr0.25)Ti1-δO3-2δceramics with increasingδvalue.The orientation of VO??elastic dipoles results in the domain-wall pinning and thus the reduction of the dielectric loss.With increasing Sb2O3content,the relative dielectric constant,dielectric constant maximum and Curie temperature of(Ba0.75Sr0.25)Ti0.998O2.996ceramics decrease dramatically while the dielectric loss increases.
文摘Elastic properties are important in fundamental understanding of multiferroic materials. However, up to now, there is no work about anisotropy of elastic properties in orthorhombic Ca_3Mn_2O_7. In this study, using coordinate transformation method, we investigated basic elastic parameters(elastic constants c'_(ij)) and engineering elastic parameters(Young's modulus E, Poisson's ratio v, and the rigidity modulus G') of orthorhombic Ca_3Mn_2O_7 along arbitrary orientations. The detailed anisotropic characteristics of these parameters were presented. The results reveal the orientation related elastic properties in mm2 point group orthorhombic Ca_3Mn_2O_7.
