The China dual-functional lithium–lead test blanket module(DFLL-TBM) is a liquid Li Pb blanket concept developed by the Institute of Nuclear Energy Safety Technology of the Chinese Academy of Sciences for testing in ...The China dual-functional lithium–lead test blanket module(DFLL-TBM) is a liquid Li Pb blanket concept developed by the Institute of Nuclear Energy Safety Technology of the Chinese Academy of Sciences for testing in ITER to validate relevant tritium breeding and shielding technologies. In this study, neutronic calculations of DFLL-TBM were carried out using a massively parallel three-dimensional transport code, Hydra, with the Fusion Evaluated Nuclear Data Library/MG. Hydra was developed by the Nuclear Engineering Computational Physics Lab based on the discrete ordinates method and has been devoted to neutronic analysis and shielding evaluation for nuclear facilities. An in-house Monte Carlo code(MCX) was employed to verify the discretized calculation model used by Hydra for the DFLL-TBM calculations. The results showed two key aspects:(1) In most material zones,Hydra solutions are in good agreement with the reference MCX results within 1%, and the maximal relative difference of the neutron flux is merely 3%, demonstrating the correctness of the calculation model;(2) while the current DFLL-TBM design meets the operation shielding requirement of ITER for 4 years, it does not satisfy the tritium self-sufficiency requirement. Compared to the two-step approach, Hydra produces higher accuracies as it does not rely on the homogenization technique during the calculation process. The parallel efficiency tests of Hydra using the DFLL-TBM model also showed that this code maintains a high parallel efficiency on O(100) processors and, as a result, is able to significantly improve computing performance through parallelization. Parameter studies have been carried out by varying the thickness of the beryllium armor layer and the tritium breeding zone to understand the influence of the beryllium layer and breeding zone thickness on tritium breeding performance. This establishes a foundation for further improvement in the tritium production performance of DFLL-TBM.展开更多
Three-arm and four-arm star-like polybutadienes (PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the az...Three-arm and four-arm star-like polybutadienes (PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 ℃ in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.展开更多
基金the National Key Research and Development Program of China(Nos.2018YFB0204301,2017YFB0202104,and 2017YFE0302200)。
文摘The China dual-functional lithium–lead test blanket module(DFLL-TBM) is a liquid Li Pb blanket concept developed by the Institute of Nuclear Energy Safety Technology of the Chinese Academy of Sciences for testing in ITER to validate relevant tritium breeding and shielding technologies. In this study, neutronic calculations of DFLL-TBM were carried out using a massively parallel three-dimensional transport code, Hydra, with the Fusion Evaluated Nuclear Data Library/MG. Hydra was developed by the Nuclear Engineering Computational Physics Lab based on the discrete ordinates method and has been devoted to neutronic analysis and shielding evaluation for nuclear facilities. An in-house Monte Carlo code(MCX) was employed to verify the discretized calculation model used by Hydra for the DFLL-TBM calculations. The results showed two key aspects:(1) In most material zones,Hydra solutions are in good agreement with the reference MCX results within 1%, and the maximal relative difference of the neutron flux is merely 3%, demonstrating the correctness of the calculation model;(2) while the current DFLL-TBM design meets the operation shielding requirement of ITER for 4 years, it does not satisfy the tritium self-sufficiency requirement. Compared to the two-step approach, Hydra produces higher accuracies as it does not rely on the homogenization technique during the calculation process. The parallel efficiency tests of Hydra using the DFLL-TBM model also showed that this code maintains a high parallel efficiency on O(100) processors and, as a result, is able to significantly improve computing performance through parallelization. Parameter studies have been carried out by varying the thickness of the beryllium armor layer and the tritium breeding zone to understand the influence of the beryllium layer and breeding zone thickness on tritium breeding performance. This establishes a foundation for further improvement in the tritium production performance of DFLL-TBM.
基金financially supported by the National Natural Science Foundation of China(Nos.51233005,21004060 and 51073149)
文摘Three-arm and four-arm star-like polybutadienes (PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 ℃ in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.