Vacancy defect MoSeTe embedded in N and F co-doped carbon skeleton for high performance sodium ion batteries and hybrid capacitors

Sodium-ion batteries(SIBs) and hybrid capacitors(SIHCs) have garnered significant attention in energy storage due to their inherent advantages,including high energy density,cost-effectiveness,and enhanced safety.However,developing high-performance anode materials to improve sodium storage performa nce still remains a major challenge.Here,a facile one-pot method has been developed to fabricate a hybrid of MoSeTe nanosheets implanted within the N,F co-doped honeycomb carbon skeleton(MoSeTe/N,F@C).Experimental results demonstrate that the incorporation of large-sized Te atoms into MoSeTe nanosheets enlarges the layer spacing and creates abundant anion vacancies,which effectively facilitate the insertion/extraction of Na^(+) and provide numerous ion adsorption sites for rapid surface capacitive behavior.Additionally,the heteroatoms N,F co-doped honeycomb carbon skeleton with a highly conductive network can restrain the volume expansion and boost reaction kinetics within the electrode.As anticipated,the MoSeTe/N,F@C anode exhibits high reversible capacities along with exceptional cycle stability.When coupled with Na_(3)V_(2)(PO_(4))_(3)@C(NVPF@C) to form SIB full cells,the anode delivers a reversible specific capacity of 126 mA h g^(-1) after 100 cycles at 0.1 A g^(-1).Furthermore,when combined with AC to form SIHC full cells,the anode demonstrates excellent cycling stability with a reversible specific capacity of50 mA h g^(-1) keeping over 3700 cycles at 1.0 A g^(-1).In situ XRD,ex situ TEM characterization,and theoretical calculations(DFT) further confirm the reversibility of sodium storage in MoSeTe/N,F@C anode materials during electrochemical reactions,highlighting their potential for widespread practical application.This work provides new insights into the promising utilization of advanced transition metal dichalcogenides as anode materials for Na^(+)-based energy storage devices.

Digital Watermarking Secure Scheme for Remote Sensing Image Protection

As a means of copyright protection for multimedia data, digital watermarking technology has attracted more and more attention in various research fields. Researchers have begun to explore the feasibility of applying it to remote sensing data recently. Because of the particularity of remote sensing image, higher requirements are put forward for its security and management, especially for the copyright protection, illegal use and authenticity identification of remote sensing image data. Therefore, this paper proposes to use image watermarking technology to achieve comprehensive security protection of remote sensing image data, while the use of cryptography technology increases the applicability and security of watermarking technology. The experimental results show that the scheme of remote sensing image digital watermarking technology has good performance in the imperceptibility and robustness of watermarking.

Pore size distribution,their geometry and connectivity in deeply buried Paleogene Es1 sandstone reservoir,Nanpu Sag,East China

The study or pore characteristics is or great importance in reservoir evaluation,especially in deeply buried s andstone.It controls the storage mechanism and reservoir fluid properties of the permeable horizons.The first member of Eocene Shahejie Formation(Esl)sandstone is classified as feldspathic litharenite and lithic arkose.The present research investigates the pore characteristics and reservoir features of the deeply buried sandstone reservoir of Esl member of Shahejie Formation.The techniques including thin-section petrography,mercury injection capillary pressure(MICP),scanning electron microscopy and laser scanning confocal microscope images were used to demarcate the pores including primary intergranular pores and secondary intergranular,intragranular,dissolution and fracture pores.Mercury injection test and routine core analysis were led to demarcate the pore network characteristics of the studied reservoir.Pore size and pore throat size distribution are acquired from mercury injection test.Porosity values range from 0.5%to 30%,and permeability ranges 0.006-7000 mD.Pore radii of coarse-grained sandstone and fine-grained sandstone range from 0.2 to>4μm and 1 nm to 1.60μm,respectively,by MICP analysis.The mineral composition also plays an important role in protecting the pores with pressure from failure.Fractured sandstone and coarse-grained sandstone consist of large and interconnected pores that enhance the reservoir porosity and permeability,whereas fine-grained sandstone and siltstone consist of numerous pores but not well interconnected,and so they consist of high porosity with low permeability.

Progress in octahedral spherical hohlraum study

In this paper,we give a review of our theoretical and experimental progress in octahedral spherical hohlraum study.From our theoretical study,the octahedral spherical hohlraums with 6 Laser Entrance Holes(LEHs)of octahedral symmetry have robust high symmetry during the capsule implosion at hohlraum-to-capsule radius ratio larger than 3.7.In addition,the octahedral spherical hohlraums also have potential superiority on low backscattering without supplementary technology.We studied the laser arrangement and constraints of the octahedral spherical hohlraums,and gave a design on the laser arrangement for ignition octahedral hohlraums.As a result,the injection angle of laser beams of 50°-60°was proposed as the optimum candidate range for the octahedral spherical hohlraums.We proposed a novel octahedral spherical hohlraum with cylindrical LEHs and LEH shields,in order to increase the laser coupling efficiency and improve the capsule symmetry and to mitigate the influence of the wall blowoff on laser transport.We studied on the sensitivity of the octahedral spherical hohlraums to random errors and compared the sensitivity among the octahedral spherical hohlraums,the rugby hohlraums and the cylindrical hohlraums,and the results show that the octahedral spherical hohlraums are robust to these random errors while the cylindrical hohlraums are the most sensitive.Up till to now,we have carried out three experiments on the spherical hohlraum with 2 LEHs on Shenguang(SG)laser facilities,including demonstration of improving laser transport by using the cylindrical LEHs in the spherical hohlraums,spherical hohlraum energetics on the SGIII prototype laser facility,and comparisons of laser plasma instabilities between the spherical hohlraums and the cylindrical hohlraums on the SGIII laser facility.

An experimental study on dynamic coupling process of alkaline feldspar dissolution and secondary mineral precipitation

In order to clarify the dynamic process of feldspar dissolution-precipitation and explore the formation mechanism of secondary porosity,six batch reactor experiments were conducted at 200℃and pH=7 measured at room temperature.Temporal evolution of fluid chemistry was analyzed with an inductively coupled plasma optical emission spectrometer(ICP-OES).Solid reaction products were retrieved from six batch experiments terminated after 36,180,276,415,766 and 1008 h.Scanning electron microscopy(SEM)revealed dissolution features and significant secondary mineral adhered on the feldspar surface.The process of feldspar dissolution-precipitation proceeded slowly and full equilibrium was not achieved after 1008 h.Saturation indices suggested that the albite and K-feldspar dissolution occurred throughout the experiments.The average dissolution rates for albite and K-feldspar were 2.28×10^-10 and 8.51×10^-11 mol m^-2 s^-1,respectively.Based on the experimental data,the reaction process of alkaline feldspar was simulated and the secondary porosity had increased 0.3%after the experiment.

Facile synthesis and performance of polypyrrole-coated sulfur nanocomposite as cathode materials for lithium/sulfur batteries

In situ chemical oxidation polymerization of pyrrole on the surface of sulfur particles was carried out to synthesize a sulfur/polypyrrole （SIPPy） nanocomposite with core-shell structure. The composite was characterized by elemental analysis, X-ray diffraction, scanning/transmission electron microscopy, and electrochemical measurements. XRD and FTIR results showed that sulfur well dispersed in the core-shell structure and PPy structure was successfully obtained via in situ oxidative polymerization of pyrrole on the surface of sulfur particles. TEM observation revealed that PPy was formed and fixed to the surface of sulfur nanoparticle after polymerization, developing a well-defined core-shell structure and the thickness of PPy coating layer was in the range of 20-30 nm. In the composite, PPy worked as a conducting matrix as well as a coating agent, which confined the active materials within the electrode. Consequently, the as prepared SIPPy composite cathode exhibited good cycling and rate performances for rechargeable lithium/sulfur batteries. The resulting cell containing SIPPy composite cathode yields a discharge capacity of 1039 mAh·g^-1 at the initial cycle and retains 59% of this value over 50 cycles at 0.1 C rate. At 1 C rate, the SIPPy composite showed good cycle stability, and the discharge capacity was 475 mAh·g^-1 after 50 cycles.

Corrigendum to“First demonstration of improving laser propagation inside the spherical hohlraums by using the cylindrical laser entrance hole”[Matter Radiation Extremes 1(1)(2016)2-7]

Corrigendum Text:On page 2 of this letter,there is a misprint in the unit.The unit of the geometrical dimension of the spherical hohlraums on this page should always be“mm”rather than“mm”,i.e.in the second paragraph,“…with 800 J per beam at 0.35 mm…”should be“…with 800 J per beam at 0.35 mm…”,“The slit of 400 mm width is parallel…”should be“The slit of 400 mm width is parallel…”,“The laser focal diameter is about 500 mm…”should be“The laser focal diameter is about 500 mm…”;in the third paragraph,“…we take 850 mm as the radius…”should be“…we take 850 mm as the radius…”,“The LEH radius R_(L) is 400 mm…”should be“The LEH radius R_(L) is 400 mm…”,“…the radius of the cylindrical LEH outer ring is taken as 1.5 R_(L)=600 mm”should be“…the radius of the cylindrical LEH outer ring is taken as 1.5 R_(L)=600 mm”.This mistake does not affect any of the main results of the original letter.

First demonstration of improving laser propagation inside the spherical hohlraums by using the cylindrical laser entrance hole

The octahedral spherical hohlraums have natural superiority in maintaining high radiation symmetry during the entire capsule implosion process in indirect drive inertial confinement fusion.While,in contrast to the cylindrical hohlraums,the narrow space between the laser beams and the spherical hohlraum wall is usually commented.In this Letter,we address this crucial issue and report our experimental work conducted on the SGIII-prototype laser facility which unambiguously demonstrates that a simple design of cylindrical laser entrance hole(LEH)can dramatically improve the laser propagation inside the spherical hohlraums.In addition,the laser beam deflection in the hohlraum is observed for the first time in the experiments.Our 2-dimensional simulation results also verify qualitatively the advantages of the spherical hohlraums with cylindrical LEHs.Our results imply the prospect of adopting the cylindrical LEHs in future spherical ignition hohlraum design.

Will Coal Price Fluctuations Affect Renewable Energy Substitution and Carbon Emission? A Computable General Equilibrium-Based Study of China

Changes in the energy price system will determine the direction of evolution of the energy industry structure.As a country where coal is the dominant energy source,what is the effect of coal price fluctuations on China’s industry development costs and energy consumption structure?To investigate this problem,this paper utilized an economy–energy–environment computable general equilibrium model.In this study,four aspects were analyzed:Energy supply side,proportion of renewable energy consumption,macroeconomy,and changes in CO_(2) emissions.The results of this study show that an increase of 10%–20%in coal prices contributes to a shift into using renewable energy,which leads to energy saving and emission reduction.Renewable energy and clean energy rose by 0.57%–4.47%in the energy structure,but this has a certain negative impact on the macroeconomy.The gross domestic product(GDP)fell by 0.07%–0.18%.As a result,the decline in coal prices became an obstacle to renewable energy substitution and energy conservation.In addition,we put forward policy suggestions according to the results in energy,economic,and environmental effects.

Mixing processes and patterns of fluids in alkane-CO_(2)-water systems under high temperature and high pressure——Microscopic visual physical thermal simulations and molecular dynamics simulations

Various types of geofluids exist in deep and ultra-deep layers in petroliferous basins.The geofluids are much more active under high-temperature and high-pressure(HTHP)conditions,but their properties are unclear.We simulated the mixing of different fluids in CH_(4)/C_(3)H_(8)/C_(6)H_(14)/C_(8)H_(18)-water systems and C_(6)H_(14)/C_(8)H_(18)-CO_(2)-H_(2)O systems at temperatures of 25℃ to 425℃ and pressures of 5 MPa to 105 MPa,using an in-situ micron quartz capillary tube thermal simulation system and molecular dynamics numerical simulation software.The mixing processes,patterns,and mechanisms of various fluids were analyzed at microscale under increasing temperature and pressure conditions.The results show that the miscibility of fluids in the different alkane-H_(2)O and alkane-CO_(2)-H_(2)O systems is not instantaneous,but the miscibility degree between different fluid phases increases as the temperature and pressure rise during the experiments.The physical thermal experiments(PTEs)show that the mixing process can be divided into three stages:initial miscibility,segmented dynamic miscibility,and complete miscibility.The molecular dynamics numerical simulations(MDNSs)indicate that the mixing process of fluids in the alkane-H_(2)O and alkane CO_(2)-H_(2)O systems can be divided into seven and eight stages,respectively.The carbon number affects the miscibility of alkanes and water,and the temperature and pressure required to reach the same miscibility stage with water increase with the carbon number(C_(3)H_(8),C_(6)H_(14),CH_(4),C_(8)H_(18)).CO_(2) has a critical bridge role in the miscibility of alkanes and water,and its presence significantly reduces the temperatures required to reach the initial,dynamic,and complete miscibility of alkanes and water.The results are of great significance for analyzing and understanding the miscibility of geofluids in deep and ultra-deep HTHP systems.

Successive formation of secondary pores via feldspar dissolution in deeply buried feldspar-rich clastic reservoirs in typical petroliferous basins and its petroleum geological significance

Clastic rock reservoirs in petroliferous basins are generally rich in feldspars. Feldspar dissolution has developed widely in clastic reservoirs, and the resulting secondary pores are crucial in deeply buried reservoirs. Based on a study of the diagenesis of clastic reservoirs in the Bohai Bay Basin, Tarim Basin, and Pearl River Mouth Basin and physical and numerical simulation experiments of fluid-rock interactions, this paper proposed a successive formation model of secondary pores via feldspar dissolution in deeply buried clastic reservoirs, considering the global research progresses in feldspar dissolution in clastic rocks. Feldspar dissolution can occur from shallow open systems to deep-ultra deep closed systems in petroliferous basins, resulting in the successive formation of secondary pores at different diagenetic stages. The successive mechanism includes three aspects. The first aspect is the succession of corrosive fluids that dissolve minerals. Meteoric freshwater dominates at the Earth’s surface and the early diagenetic A stage. Subsequently, organic acids and COformed via kerogen maturation dominate at the early diagenetic B stage to the middle diagenetic stage. COand organic acids formed via hydrocarbon oxidation in hydrocarbon reservoirs dominate at the middle diagenetic B stage to the late diagenetic stage. The second aspect is the successive formation processes of secondary pores via feldspar dissolution. Large-scale feldspar secondary pores identified in deep reservoirs include secondary pores formed at shallow-medium depths that are subsequently preserved into deep layers, as well as secondary pores formed at deep depths. Existing secondary pores in deeply buried reservoirs are the superposition of successively feldspar dissolution caused by different acids at different stages. The third aspect is a successive change in the feldspar alteration pathways and porosity enhancement/preservation effect. Open to semi-open diagenetic systems are developed from the Earth’s surface to the early diagenetic stage, and feldspar dissolution forms enhanced secondary pores. Nearly closed to closed diagenetic systems develop in the middle to late diagenetic stages, and feldspar dissolution forms redistributional secondary pores. The associated cementation causes compression resistance of the rock, which is favorable for the preservation of secondary pores in deep layers. These new insights extend the formation window of secondary pores in petroliferous basins from the traditional acid-oil generation window to a high-temperature gas generation window after hydrocarbon charging. The proposed model explains the genesis of deep-ultra deep high-quality reservoirs with low-permeability, medium-porosity and dominating feldspar secondary pores, which is significant for hydrocarbon exploration in deep to ultra-deep layers.

On-chip photonic Fourier transform with surface plasmon polaritons

The Fourier transform(FT),a cornerstone of optical processing,enables rapid evaluation of fundamental mathematical operations,such as derivatives and integrals.Conventionally,a converging lens performs an optical FT in free space when light passes through it.The speed of the transformation is limited by the thickness and the focal length of the lens.By using the wave nature of surface plasmon polaritons(SPPs),here we demonstrate that the FT can be implemented in a planar configuration with a minimal propagation distance of around 10 mm,resulting in an increase of speed by four to five orders of magnitude.The photonic FT was tested by synthesizing intricate SPP waves with their Fourier components.The reduced dimensionality in the minuscule device allows the future development of an ultrafast on-chip photonic information processing platform for large-scale optical computing.

基于生物素的荧光有机小分子及其应用

生物素是一种水溶性维生素,在人体中作为一种重要的羧酸酶辅酶起作用,近年来受到化学家和生物学家的广泛青睐。此外,其在各种生理和病理过程中表现出低毒性,可以被设计成具有靶向选择性的药物载体,能将抗癌药物有效地传递给肿瘤细胞。如今含生物素的小分子已发展成一类具有显著应用价值的生物功能分子。该类化合物具有合成简便、易功能化和特异性强等优点。本文综述了生物素及其衍生物在生物传感、药物释放和其他领域的研究进展,并对其发展趋势做出了展望。

“Plasmonics”in free space:observation of giant wavevectors,vortices,and energy backflow in superoscillatory optical fields

Evanescent light can be localized at the nanoscale by resonant absorption in a plasmonic nanoparticle or taper or by transmission through a nanohole.However,a conventional lens cannot focus free-space light beyond half of the wavelength λ.Nevertheless,precisely tailored interference of multiple waves can form a hotspot in free space of an arbitrarily small size,which is known as superoscillation.Here,we report a new type of integrated metasurface interferometry that allows for the first time mapping of fields with a deep subwavelength resolution ~λ/100.The findings reveal that an electromagnetic field near the superoscillatory hotspot has many features similar to those found near resonant plasmonic nanoparticles or nanoholes:the hotspots are surrounded by nanoscale phase singularities and zones where the phase of the superoscillatory field changes more than tenfold faster than a freepropagating plane wave.Areas with high local wavevectors are pinned to phase vortices and zones of energy backflow(~λ/20 in size)that contribute to tightening of the main focal spot size beyond the Abbe-Rayleigh limit.Our observations reveal some analogy between plasmonic nanofocusing of evanescent waves and superoscillatory nanofocusing of free-space waves and prove the fundamental link between superoscillations and superfocusing,offering new opportunities for nanoscale metrology and imaging.

Interactions between hydrocarbon-bearing fluids and calcite in fused silica capillary capsules and geological implications for deeply-buried hydrocarbon reservoirs

During the burial processes of deep/ultra-deep hydrocarbon reservoirs,the interactions between hydrocarbon-bearing fluids and reservoirs significantly affect the quality evolution of hydrocarbons and reservoirs;thus,this topic requires further investigation.In this study,the continuous evolution and the coupling mechanisms in various anhydrous and hydrous nC_(16)H_(34)-(water)-(calcite)systems in fused silica capillary capsules(FSCCs)were investigated using laser Raman spectroscopy,fluorescence color analysis,and fluorescence spectroscopy,and the mineral alterations were analyzed using scanning electron microscopy(SEM).The experimental results show that extensive organic-inorganic interactions occur in the systems if water is present,and different inorganic components have different effects on hydrocarbon degradation.Distilled water promotes freeradical thermal cracking and steps oxidation,forming more low-molecular-weight hydrocarbons,CO_(2),and organic acids(e.g.,acetic acids)but suppresses the free-radical cross-linking,generating less high-molecular-weight hydrocarbons.However,in the presence of CaCl_(2) water,the yields of hydrocarbon gases are lower than in the distilled water system because high concentrations of Ca ions inhibit the generation of free radicals.Calcites,which exhibit different surface reactivities in different fluid conditions,affect hydrocarbon degradation in different ways.In the anhydrous nC16H34-calcite system,calcites promote the generation of both hydrocarbon gases and high-molecular-weight hydrocarbons.In contrast,in the hydrous nC16H34-distilled(CaCl_(2))watercalcite system,calcites promote the generation of hydrocarbon gases and suppress the generation of high-molecular-weight hydrocarbons.Calcite also reacts with organic acids via surface reactions to form secondary pores.Therefore,except for the formation temperature and pressure,organic-inorganic interactions are controlled by multiple factors,such as the water saturation,water type,water salinity,and the mineral content,resulting in different evolutions of the hydrocarbon degradation and reservoir properties.

Plasmonic evolution maps for planar metamaterials

Understanding the mode’s origin in planar metamaterials is fundamental for related applications in nanophotonics and plasmonics.For complex planar metamaterials,conventional analysis that directly obtains the final charge/current distribution of a mode is usually difficult in helping to understand the mode’s origin.In this paper,we propose a mode evolution method(MEM)with a core analysis tool,i.e.,plasmonic evolution maps(PEMs),to describe the mode evolution in several complementary planar metamaterials with designed plasmonic atoms/molecules.The PEMs could not only clearly explain a mode’s origin,but also reveal the role of a structure’s symmetry in the mode formation process.The MEM with PEMs can work as a simple,efficient,and universal approach for the mode analysis in different kinds of planar metamaterials.