Waste Mg alloys hydrogen production from seawater:An integrative overview of medium optimization,hydrogen-producing materials,underlying mechanisms,innovative technologies,and device development

In response to global carbon neutrality targets,there is an urgent need for large-scale,clean hydrogen production technologies to supplant fossil fuels and underpin the establishment of a‘hydrogen economy’.The prospect of large-scale on-site green hydrolysis of Mg-based materials for hydrogen production has attracted wide attention.Aiming at the problems of easy formation of inert oxide layer on its surface and the production of Mg(OH)_(2) to hinder the hydrolysis process,it is urgent to explore efficient,low-cost and green modification strategies.In this work,the green modification strategy for hydrolyzing hydrogen production of Mg-based materials was summarized,and the fast initial kinetics and high hydrogen production rate could be achieved by adjusting hydrolysis medium conditions and modifying Mg-based material.The significance of hydrolytic hydrogen production technology and device development for the realization of Mg-based hydrolytic hydrogen production was evaluated.Meanwhile,this work looks forward to the future direction of hydrogen production modification by hydrolysis of Mg-based alloy,and gradually optimizes the hydrolysis performance of industrial multi-component waste Mg alloy under the premise of green hydrogen production,and proposes the goal of efficient modification of waste Mg alloy,high-quality utilization of seawater,and low-cost and controllable hydrogen production process.

Effects of the Solution Treatment on Microstructural Evolution, Mechanical Properties, and Fracture Mechanism of Nickel-Based GH4099 Superalloy

Grain growth, mechanical properties, and fracture mechanism of nickel-based GH4099 superalloy are investigated using heat treatments, tensile tests, optical microscopy (OM), and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS). The OM observation shows that the matrix grains (γ-grains) undergo an apparent growth during the solution treatment. The grain size diameter increases from 100 to 174 μm when the solution temperature rises from 1100℃ to 1160℃ for 30 min. When the holding time increases from 15 to 60 min at 1140℃, the grain size diameter increases from 140 to 176 μm, indicating that the γ-grain growth is more sensitive to temperature than time. Standard deviation, Sv, and the grain size distribution are utilized to characterize the microstructural uniformity. To predict the grain size more accurately, we develop the grain growth kinetics and find that the growth index is close to 5. The yield strength (Rp0.2), tensile strength (Rm), and ductility (Af) are also measured. It is found that the effect decreases in the order cooling rate, solution temperature, time. Rp0.2 reduces by 47% with the increase in the cooling rate from 1℃ to 8000℃/min, while both strength and ductility exhibit little changes with time. The SEM results show that the fracture surfaces have typical mixed brittle and ductile characteristics when specimens are subjected to water quenching and air cooling. However, a complete brittle fracture occurs under furnace cooling conditions. The EDS analysis indicates that the brittle γ' (Ni3Ti) phase precipitates around the γ-grain boundary during the slow cooling process, which is the main factor yielding the complete brittle fracture. Finally, the optimal solution treatment scheme for the GH4099 superalloy is proposed—a temperature of 1140℃ for 30 min followed by air cooling.