Impact of photoneutrons on reactivity measurements for TMSR-SF1

The solid-fueled thorium molten salt reactor(TMSR-SF1) is a 10 MW_(th) test reactor design to be deployed in 5-10 years by the TMSR group.Its design combines coated particle fuel and molten FLiBe coolant for great intrinsic safety features and economic advantages.Due to a large amount of beryllium in the coolant salt,photoneutrons are produced by(y,n) reaction,hence the increasing fraction of effective delayed neutrons in the core by the photoneutrons originating from the long-lived fission products.Some of the delayed photoneutron groups are of long lifetime,so a direct effect is resulted in the transient process and reactivity measurement.To study the impact of photoneutrons for TMSR-SF1,the effective photoneutron fraction is estimated using k-ratio method and performed by the Monte Carlo code(MCNP5) with ENDF/B-Ⅶ cross sections.Based on the coupled neutronphoton point kinetics equations,influence of the photoneutrons is analyzed.The results show that the impact of photoneutrons is not negligible in reactivity measurement.Without considering photoneutrons in on-line reactivity measurement based on inverse point kinetics can result in overestimation of the positive reactivity and underestimation of the negative reactivity.The photoneutrons also lead to more waiting time for the doubling time measurement.Since the photoneutron precursors take extremely long time to achieve equilibrium,a "steady" power operation may not directly imply a "real" criticality.

Effect of 37Cl enrichment on neutrons in a molten chloride salt fast reactor

A molten chloride salt fast reactor(MCFR)is well suited to fuel breeding and the transmutation of transuranium(TRU)elements owing to its advantageous features of fast neutron spectrum and high TRU solubility.However,the neutron absorption cross section of 35Cl is approximately 1000 times greater than for 37Cl,which has a significant impact on the neutron physical characteristics of a MCFR.Based on an automatic online refueling and reprocessing procedure,the influences of 37Cl enrichment on neutron economy,breeding performance,and the production of harmful nuclides were analyzed.Results show that 37Cl enrichment strongly influences the neutron properties of a MCFR.With natural chlorine,233U breeding cannot be achieved and the yields of S and 36Cl are very high.Increasing the 37Cl enrichment to 97%brings a clear improvement in its neutronics property,making it almost equal to that corresponding to 100%enrichment.Moreover,when 37Cl is enriched to 99%,its neutronics parameters are almost the same as for 100%enrichment.Considering the enrichment cost and the neutron properties,a 37Cl enrichment of 97%is recommended.Achieving an optimal neutronics performance requires 99%37Cl enrichment.

Th–U cycle performance analysis based on molten chloride salt and molten fluoride salt fast reactors

The recent development of molten salt fast reactors has generated a renewed interest in them. As compared to traditional solid fuel fast neutron systems, it has many unique advantages, e.g., lower fissile inventory,no initial criticality reserve, waste reduction, and a simplified fuel cycle. It has been recognized as an ideal reactor for achieving a closed Th–U cycle. Based on the carrier salt, molten salt fast reactors could be divided into either a molten chloride salt fast reactor(MCFR) or a molten fluoride salt fast reactor(MFFR);to compare their Th–U cycle performance, the neutronic parameters in a breeding and burning(B&B) transition scenario were studied based on similar core geometry and power. The results demonstrated that the required reprocessing rate for an MCFR to achieve self-breeding was lower than that of an MFFR.Moreover, the breeding capability of an MCFR was better than that of an MFFR;at a reprocessing rate of 40 L/day,using LEU and Pu as start-up fissile materials, the doubling time(DT) of an MFFR and MCFR were 88.0 years and 48.0 years, and 16.5 years and 16.2 years, respectively.Besides, an MCFR has lower radio-toxicity due to lower buildup of fission products(FPs) and transuranium(TRU),while an MFFR has a larger, delayed neutron fraction with smaller changes during the entire operation.

Study on inherent neutron sources in MSR

The molten salt reactor(MSR) has received much recent attention. The presence of beryllium and the mixing of actinides with light nuclei in the fuel salt result in a relatively strong neutron source that can affect the surveillance at subcritical and transient characteristics during operation. In this study, we predict the inherent neutron sources based on a MSR model. The calculation shows that in the fresh core, the inherent neutron sources are mainly from alpha-induced neutrons. After power operation, the inherent neutron sources become remarkably stronger due to photoneutrons. Although being an insignificant part in the total neutron population during operation, the inherent neutron sources can be used as the installed neutron source after shutdown. If the MSR has continuously operated at full power(2 MWt) for 10 days,then there would be no need for the installed source within80 days after shutdown. After operating constantly for500 days, the installed neutron source can be eliminated within 2 years after shutdown.

Evaluation of the fraction of delayed photoneutrons for TMSR-SF1

The 10 MW_(th) solid-fueled thorium molten salt reactor(TMSR-SF1) is a FLi Be salt-cooled pebble bed reactor to be deployed in 5–10 years, designed by the TMSR group. Due to a large amount of beryllium in the core, the photoneutrons are produced via(γ , n) reactions.Some of them are generated a long time after the fission event and therefore are considered as delayed neutrons. In this paper, we redefine the effective delayed neutrons into two fractions: the delayed fission neutron fraction and the delayed photoneutron fraction. With some reasonable assumptions, the inner product method and the k-ratio method are adopted for studying the effective delayed photoneutron fraction. In the k-ratio method, the Monte Carlo code MCNP6 is used to evaluate the effective photoneutron fraction as the ratio between the multiplication factors with and without contribution of the delayed neutrons and photoneutrons. In the inner product method, with the Monte Carlo and deterministic codes together, we use the adjoint neutron flux as a weighting function for the neutrons and photoneutrons generated in the core. Results of the two methods agree well with each other, but the k-ratio method requires much more computing time for the same precision.

Reactor protection system testing for the solid fuel thorium molten salt reactor

Safety system testing is one of the most rigorous and time-consuming requirements in the verification and validation process for reactor protection systems(RPSs).This paper presents the development of a test system for the fully digital and field-programmable gate array-based RPS of the solid fuel(SF) thorium-breeding molten salt pebble bed fluoride salt-cooled reactor(TMSR),denoted as the TMSR-SF1 project,developed by the Chinese Academy of Sciences.The test system is applied to the RPS to ensure that it fully meets its designed functions and system specifications.We first introduce the testing principles and methods.Then,the hardware component designs and the software program development of the test system are discussed.Finally,the test process and test results are discussed and summarized.

Bubble formation and evolution behavior from vertical wall orifice

Bubble formation is an integral part of the twophase flow science.Through numerical simulation and experiments using different air flow rates and orifice diameters,the present study aims at investigating the behavior of bubble formation and evolution from vertical wall orifice in quiescent pure water.For the experiments,the images of the bubble formation process under different working conditions were recorded using a high-speed camera and analyzed the entire process.The bubble formation process can be divided into three stages,namely nucleation,stable growth,and necking.According to the obtained results,bubble forms only when the air-phase pressure exceeds the threshold pressure at wall orifice.Due to the influence of the threshold pressure and buoyancy,the bubble volume decreases with an increase in the wall orifice diameter for the same flow rate.Moreover,the volume of fluid method is applied to simulate bubble formation in a three-dimensional model and the"buffer volume"is considered in the simulation model.The simulation results matched well with the experimental data,which proves the existence of threshold pressure and the periodic pressure fluctuation at the wall orifice.