Simulation of shear layers interaction and unsteady evolution under different double backward-facing steps

High-order accurate schemes are employed to numerically simulate the interaction of a supersonic jet and a co-directional supersonic inflow. A double backward-facing step model is proposed to investigate the interaction between the jet shear layer and the supersonic inflow shear layer. It is found that due to the interaction of the shear layer, a secondary jet is injected into the recirculation zone at the intersection of the two shear layers. The secondary jet produced by the interaction of the two shear layers has a periodicity because of shear layers interaction. The distinction in the shape of double backward-facing steps will induce changes in the period of the secondary jet. The analysis and discussion of the periodicity of the secondary jet are mainly focused in this letter.

Transitional wave configurations between Type Ⅲ and Type Ⅳ oblique-shock/bow-shock interactions

The interactions of oblique/bow shock waves are the key flow phenomena restricting the design and aerothermodynamic performance of high-speed vehicles.Type Ⅲ and Type Ⅳ Shock/Shock Interactions(SSIs)have been extensively investigated,as such interactions can induce abnormal aerodynamic heating problems in hypersonic flows of vehicles.The transition process between these two distinct types of shock/shock interactions remains unclear.In the present study,a subclass of shock/shock interaction configuration is revealed and defined as Type Ⅲa.Type Ⅲa interaction can induce much more severe aerodynamic heating than a Type Ⅳ interaction which was ever reported to be the most serious in literature.The intense aerodynamic heating observed in this configuration highlights a new design point for the thermal protection system of hypersonic vehicles.A secondary Mach interaction between shock waves in the supersonic flow path of a Type Ⅲ configuration is demonstrated to be the primary mechanism for such a subclass of shock/shock interaction configuration.

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster,higher and further.The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development.There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes.These wind tunnels are named as air-directly-heated hypersonic wind tunnel,light-gas-heated shock tunnel,free-piston-driven shock tunnel and detonation-driven shock tunnel,respectively.The critical technologies for developing the wind tunnels are introduced in this paper,and their merits and weakness are discussed based on wind tunnel performance evaluation.Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments.Three kinds of the measurement techniques considered to be of primary importance are introduced here,including the heat flux sensor,the aerodynamic balance,and optical diagnosis techniques.The techniques are developed usually for conventional wind tunnels,but further improved for hypersonic and high-enthalpy tunnels.The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future.Therefore,several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.

Noise reduction for temperature-sensitive paint measurement contaminated by strong background radiation in a high enthalpy hypersonic tunnel

The strong background radiation in high enthalpy hypersonic shock tunnels has posed severe challenges for measurement using luminescent coatings.We proposed a solution for reducing background radiation from time-resolved temperature-sensitive paint(TSP)measurement in a hypersonic flow with Ma=6.5 and T_(0)=3525 K.The TSP was applied on an inlet ramp model,and the images were taken by a high-speed camera at 2 kHz under a modulated excitation.The strong background radiation led to a low signal-to-noise ratio and significant errors for the first half of the 130-ms test duration.Accordingly,three noise reduction methods were developed and evaluated based on temporal reconstruction,spatial reconstruction and robust principal component analysis(RPCA),respectively.The RPCA method showed the best performance that successfully recovered high-quality TSP data for a majority of test duration(t≥40 ms).