The prediction of the influent load is of great importance for the improvement of the control system to a large wastewater treatment plant. A systematic data analysis method is presented in this paper in order to esti...The prediction of the influent load is of great importance for the improvement of the control system to a large wastewater treatment plant. A systematic data analysis method is presented in this paper in order to estimate and predict the periodicity of the influent flow rate and ammonia （NH3） concentrations： 1） data filtering using wavelet decomposition and reconstruction; 2） typical cycle identification using power spectrum density analysis; 3） fitting and prediction model establishment based on an autoregressive model. To give meaningful information for feedforward control systems, predictions in different time scales are tested to compare the corresponding predicting accuracy. Considering the influence of the rainfalls, a linear fitting model is derived to estimate the relationship between flow rate trend and rain events. Measurements used to support coefficient fitting and model testing are acquired from two municipal wastewater treatment plants in China. The results show that 1） for both of the two plants, the periodicity affects the flow rate and NH3 concentrations in different cycles （especially cycles longer than 1 day）; 2） when the flow rate and NH3 concentrations present an obvious periodicity, the decreasing of prediction accuracy is not distinct with increasing of the prediction time scales; 3） the periodicity influence is larger than rainfalls; 4） the rainfalls will make the periodicity of flow rate less obvious in intensive rainy periods.展开更多
Full-scale experiments have been carried out to adapt the activated sludge model ASM2d to include the influence of metal dosage （Fe^3＋ and Al^3＋） for phosphorus removal. Phosphorus removal rates, nitrification rat...Full-scale experiments have been carried out to adapt the activated sludge model ASM2d to include the influence of metal dosage （Fe^3＋ and Al^3＋） for phosphorus removal. Phosphorus removal rates, nitrification rates, as well as pH and sludge settling performance, were evaluated as functions of the metal dosages. Furthermore, models relating certain parameters to the dosage of chemicals have been derived. Corresponding parameters in the ASM2d and the secondary settler models, included in the Benchmark Simulation Model No 1 （BSM1）, have been modified to take the metal influence into consideration. Based on the effluent limits and penalty policy of China, an equivalent evaluation method was derived for the total cost assessment. A large number of 300-day steady-state and 14-day open-loop dynamic simulations were performed to demonstrate the difference in behavior between the original and the modified BSM1. The results show that 1） both in low and high mole concentrations, Fe^3＋ addition results in a higher phosphorus removal rate than Al^3＋; 2） the sludge settling velocity will increase due to the metal addition; 3） the respiration rate of the activated sludge is decreased more by the dosage of Al^3＋ than Fe^3＋; 4） the inhibition of Al^3＋ on the nitrification rate is stronger than that of Fe^3＋; 5） the total operating cost will reach the minimum point for smaller dosages of Fe^3＋, but always increase with Al^3＋ addition.展开更多
文摘The prediction of the influent load is of great importance for the improvement of the control system to a large wastewater treatment plant. A systematic data analysis method is presented in this paper in order to estimate and predict the periodicity of the influent flow rate and ammonia （NH3） concentrations： 1） data filtering using wavelet decomposition and reconstruction; 2） typical cycle identification using power spectrum density analysis; 3） fitting and prediction model establishment based on an autoregressive model. To give meaningful information for feedforward control systems, predictions in different time scales are tested to compare the corresponding predicting accuracy. Considering the influence of the rainfalls, a linear fitting model is derived to estimate the relationship between flow rate trend and rain events. Measurements used to support coefficient fitting and model testing are acquired from two municipal wastewater treatment plants in China. The results show that 1） for both of the two plants, the periodicity affects the flow rate and NH3 concentrations in different cycles （especially cycles longer than 1 day）; 2） when the flow rate and NH3 concentrations present an obvious periodicity, the decreasing of prediction accuracy is not distinct with increasing of the prediction time scales; 3） the periodicity influence is larger than rainfalls; 4） the rainfalls will make the periodicity of flow rate less obvious in intensive rainy periods.
文摘Full-scale experiments have been carried out to adapt the activated sludge model ASM2d to include the influence of metal dosage （Fe^3＋ and Al^3＋） for phosphorus removal. Phosphorus removal rates, nitrification rates, as well as pH and sludge settling performance, were evaluated as functions of the metal dosages. Furthermore, models relating certain parameters to the dosage of chemicals have been derived. Corresponding parameters in the ASM2d and the secondary settler models, included in the Benchmark Simulation Model No 1 （BSM1）, have been modified to take the metal influence into consideration. Based on the effluent limits and penalty policy of China, an equivalent evaluation method was derived for the total cost assessment. A large number of 300-day steady-state and 14-day open-loop dynamic simulations were performed to demonstrate the difference in behavior between the original and the modified BSM1. The results show that 1） both in low and high mole concentrations, Fe^3＋ addition results in a higher phosphorus removal rate than Al^3＋; 2） the sludge settling velocity will increase due to the metal addition; 3） the respiration rate of the activated sludge is decreased more by the dosage of Al^3＋ than Fe^3＋; 4） the inhibition of Al^3＋ on the nitrification rate is stronger than that of Fe^3＋; 5） the total operating cost will reach the minimum point for smaller dosages of Fe^3＋, but always increase with Al^3＋ addition.
