The aim of the research was to examine the influence of organo-modified Indian bentonite （IB） nanoclay dispersed in vinyisster on the mechanical properties of nanoclaylvinylesterlglass nanocomposRes. Nanoclay was or...The aim of the research was to examine the influence of organo-modified Indian bentonite （IB） nanoclay dispersed in vinyisster on the mechanical properties of nanoclaylvinylesterlglass nanocomposRes. Nanoclay was organically modified using cationic surfactant hexadecyltrimethylammonium bromide （HDTMA-Br） by cation exchange method and dispersed in vinylester using ultrasonication and twin screw extrusion. XRD of nanoclaylvinylester revealed exfoliaUon at 4 wt.% nanoclay indicating uniform dispersion in the polymer. DSC results showed improvement in glass transition temperature by 22.3% in 4 wt.% nanoclaylvinylester/glass when compared with that of vinylester/glass. Nanoclay/vinylester/glass with 4 wt,% nanoclay showed 29.23%, 23.84% and 60.87% improvement in ultimate tensile strength （UTS）, fiexural strength （FS） and interlaminar shear strength （ILSS） respectively when compared with those of vinylester! glass. The mode of tensile failure examined by SEM showed no agglomeration of nanoclay in 4 wt.% nanoclayNinylester/glass specimens.展开更多
The dispersion of montmorillonite （MMT） in vinylester for preparing nanoclay/vinylester gel coat was reported. Two sets of MMT/vinylester specimens, namely Type I and Type 2, were prepared for comparative studies. T...The dispersion of montmorillonite （MMT） in vinylester for preparing nanoclay/vinylester gel coat was reported. Two sets of MMT/vinylester specimens, namely Type I and Type 2, were prepared for comparative studies. Type I specimens were prepared using ultrasonication only, and Type 2 specimens were prepared using both ultrasonication and twin-screw extrusion. According to XRD and TEM results, Type 2 specimens showed lower levels of nanoclay agglomeration and higher levels o! exfoliation. DSC results showed that the glass transition temperatures of Type 2 specimens are higher than those of Type 1 specimens. TGA results showed that the residual weight of 4 wt.% MMT/vinylester of Type 1 was 7.38%, while the corresponding value of Type 2 was 13,5%, indicating lower thermal degradation in the latter. MMTt vinylester/glass and MMT/vinylester/carbon specimens were fabricated and tested for mechanical and fire retardation behaviours. Type 2 based nanocomposite laminates showed greater values of ultimate tensile strength, flexural strength, interlaminar shear strength, impact strength, horizontal burning rate, and vertical burning rate than Type 1 based laminates. SEM images of tensile fractured surfaces revealed that Type 2 based laminates have no or less agglomeration of nanoclay than Type 1 based laminates.展开更多
文摘The aim of the research was to examine the influence of organo-modified Indian bentonite （IB） nanoclay dispersed in vinyisster on the mechanical properties of nanoclaylvinylesterlglass nanocomposRes. Nanoclay was organically modified using cationic surfactant hexadecyltrimethylammonium bromide （HDTMA-Br） by cation exchange method and dispersed in vinylester using ultrasonication and twin screw extrusion. XRD of nanoclaylvinylester revealed exfoliaUon at 4 wt.% nanoclay indicating uniform dispersion in the polymer. DSC results showed improvement in glass transition temperature by 22.3% in 4 wt.% nanoclaylvinylester/glass when compared with that of vinylester/glass. Nanoclay/vinylester/glass with 4 wt,% nanoclay showed 29.23%, 23.84% and 60.87% improvement in ultimate tensile strength （UTS）, fiexural strength （FS） and interlaminar shear strength （ILSS） respectively when compared with those of vinylester! glass. The mode of tensile failure examined by SEM showed no agglomeration of nanoclay in 4 wt.% nanoclayNinylester/glass specimens.
文摘The dispersion of montmorillonite （MMT） in vinylester for preparing nanoclay/vinylester gel coat was reported. Two sets of MMT/vinylester specimens, namely Type I and Type 2, were prepared for comparative studies. Type I specimens were prepared using ultrasonication only, and Type 2 specimens were prepared using both ultrasonication and twin-screw extrusion. According to XRD and TEM results, Type 2 specimens showed lower levels of nanoclay agglomeration and higher levels o! exfoliation. DSC results showed that the glass transition temperatures of Type 2 specimens are higher than those of Type 1 specimens. TGA results showed that the residual weight of 4 wt.% MMT/vinylester of Type 1 was 7.38%, while the corresponding value of Type 2 was 13,5%, indicating lower thermal degradation in the latter. MMTt vinylester/glass and MMT/vinylester/carbon specimens were fabricated and tested for mechanical and fire retardation behaviours. Type 2 based nanocomposite laminates showed greater values of ultimate tensile strength, flexural strength, interlaminar shear strength, impact strength, horizontal burning rate, and vertical burning rate than Type 1 based laminates. SEM images of tensile fractured surfaces revealed that Type 2 based laminates have no or less agglomeration of nanoclay than Type 1 based laminates.
