In this paper, the effect of RRA treatment on the microstructure evolution of a high strength aluminum alloy was investigated using DSC, TEM and SADP technology. The results show that the precipitation resulting from ...In this paper, the effect of RRA treatment on the microstructure evolution of a high strength aluminum alloy was investigated using DSC, TEM and SADP technology. The results show that the precipitation resulting from RRA is extremely fine and distributed homogeneously in the grains, being slightly coarser and more stable than that of T6 temper. While, the grain-boundary precipitation is very close to that of the alloy at T73 temper, being coarse and discontinuous. High retrogression temperature and long retrogression time leads to a more stable microstructure after re-aging.展开更多
This work aims to elucidate the impact of aluminum-content on microstructure and deformation mechanisms of transformation-induced plasticity(TRIP) steels through macroscale and nanoscale deformation experiments comb...This work aims to elucidate the impact of aluminum-content on microstructure and deformation mechanisms of transformation-induced plasticity(TRIP) steels through macroscale and nanoscale deformation experiments combined with post-mortem electron microscopy of the deformed region.The solid-state transformation-induced mechanical deformation varied with the Al contents,and influenced tensile strength-ductility combination.Steels with 2–4 wt% Al were characterized by TRIP effect.In contrast to 2 Al-TRIP and 4 Al-TRIP steels,twinning-induced plasticity(TWIP) was also observed in conjunction with strain-induced martensite in 6 Al-TRIP steel.This behavior is attributed to the increase in stacking fault energy with the increase of Al content and stability of austenite,which depends on the local chemical variation.The study addresses the knowledge gap with regard to the effect of Al content on austenite stability in medium-Mn TRIP steels.This combination is expected to potentially enable cost-effective alloy design with high strength-high ductility condition.展开更多
In the metallic components fabricated by the emerging selective laser melting(SLM)technology,most strategies used for strengthening the materials sacrifice the ductility,leading to the so-called strengthductility trad...In the metallic components fabricated by the emerging selective laser melting(SLM)technology,most strategies used for strengthening the materials sacrifice the ductility,leading to the so-called strengthductility trade-off.In the present study,we report that the strength and ductility of materials can be enhanced simultaneously by introducing nanoparticles,which can break the trade-off of the metallic materials.In the case of in-situ nano-TiB_(2)decorated AlSi10Mg composites,the introduced nanoparticles lead to columnar-to-equiaxed transition,grain refinement and texture elimination.With increasing content of nanoparticles,the strength increases continually.Significantly,the ductility first increases and then decreases.Our results show that the ductility is controlled by the competition between the crack-induced catastrophic fracture and ductile fracture associated with dislocation activities.The first increase of ductility is mainly attributed to the suppression of crack-induced catastrophic fracture when TiB_(2)nanoparticles present.With the further increase of TiB_(2)nanoparticles,the subsequent decrease of ductility is mainly controlled by dislocation activities.Thus,the materials will exhibit the optimum strength and ductility combination in a certain range of TiB_(2)nanoparticles.This study clarifies the physical mechanism controlling ductility for nano-TiB_(2)decorated Al Si10Mg composites,which provides the insights for the design of structural materials.展开更多
A local domain-free discretization-immersed boundary method(DFDIBM)is presented in this paper to solve incompressible Navier-Stokes equations in the primitive variable form.Like the conventional immersed boundary meth...A local domain-free discretization-immersed boundary method(DFDIBM)is presented in this paper to solve incompressible Navier-Stokes equations in the primitive variable form.Like the conventional immersed boundary method(IBM),the local DFD-IBM solves the governing equations in the whole domain including exterior and interior of the immersed object.The effect of immersed boundary to the surrounding fluids is through the evaluation of velocity at interior and exterior dependent points.To be specific,the velocity at interior dependent points is computed by approximate forms of solution and the velocity at exterior dependent points is set to the wall velocity.As compared to the conventional IBM,the present approach accurately implements the non-slip boundary condition.As a result,there is no flow penetration,which is often appeared in the conventional IBM results.The present approach is validated by its application to simulate incompressible viscous flows around a circular cylinder.The obtained numerical results agree very well with the data in the literature.展开更多
文摘In this paper, the effect of RRA treatment on the microstructure evolution of a high strength aluminum alloy was investigated using DSC, TEM and SADP technology. The results show that the precipitation resulting from RRA is extremely fine and distributed homogeneously in the grains, being slightly coarser and more stable than that of T6 temper. While, the grain-boundary precipitation is very close to that of the alloy at T73 temper, being coarse and discontinuous. High retrogression temperature and long retrogression time leads to a more stable microstructure after re-aging.
基金supported financially by the National Science Foundation,USA (No.#DMR-MRI 1530891)
文摘This work aims to elucidate the impact of aluminum-content on microstructure and deformation mechanisms of transformation-induced plasticity(TRIP) steels through macroscale and nanoscale deformation experiments combined with post-mortem electron microscopy of the deformed region.The solid-state transformation-induced mechanical deformation varied with the Al contents,and influenced tensile strength-ductility combination.Steels with 2–4 wt% Al were characterized by TRIP effect.In contrast to 2 Al-TRIP and 4 Al-TRIP steels,twinning-induced plasticity(TWIP) was also observed in conjunction with strain-induced martensite in 6 Al-TRIP steel.This behavior is attributed to the increase in stacking fault energy with the increase of Al content and stability of austenite,which depends on the local chemical variation.The study addresses the knowledge gap with regard to the effect of Al content on austenite stability in medium-Mn TRIP steels.This combination is expected to potentially enable cost-effective alloy design with high strength-high ductility condition.
基金financially supported by the National Key Research and Development Program of China(No.2018YFB1106302)。
文摘In the metallic components fabricated by the emerging selective laser melting(SLM)technology,most strategies used for strengthening the materials sacrifice the ductility,leading to the so-called strengthductility trade-off.In the present study,we report that the strength and ductility of materials can be enhanced simultaneously by introducing nanoparticles,which can break the trade-off of the metallic materials.In the case of in-situ nano-TiB_(2)decorated AlSi10Mg composites,the introduced nanoparticles lead to columnar-to-equiaxed transition,grain refinement and texture elimination.With increasing content of nanoparticles,the strength increases continually.Significantly,the ductility first increases and then decreases.Our results show that the ductility is controlled by the competition between the crack-induced catastrophic fracture and ductile fracture associated with dislocation activities.The first increase of ductility is mainly attributed to the suppression of crack-induced catastrophic fracture when TiB_(2)nanoparticles present.With the further increase of TiB_(2)nanoparticles,the subsequent decrease of ductility is mainly controlled by dislocation activities.Thus,the materials will exhibit the optimum strength and ductility combination in a certain range of TiB_(2)nanoparticles.This study clarifies the physical mechanism controlling ductility for nano-TiB_(2)decorated Al Si10Mg composites,which provides the insights for the design of structural materials.
文摘A local domain-free discretization-immersed boundary method(DFDIBM)is presented in this paper to solve incompressible Navier-Stokes equations in the primitive variable form.Like the conventional immersed boundary method(IBM),the local DFD-IBM solves the governing equations in the whole domain including exterior and interior of the immersed object.The effect of immersed boundary to the surrounding fluids is through the evaluation of velocity at interior and exterior dependent points.To be specific,the velocity at interior dependent points is computed by approximate forms of solution and the velocity at exterior dependent points is set to the wall velocity.As compared to the conventional IBM,the present approach accurately implements the non-slip boundary condition.As a result,there is no flow penetration,which is often appeared in the conventional IBM results.The present approach is validated by its application to simulate incompressible viscous flows around a circular cylinder.The obtained numerical results agree very well with the data in the literature.