In this work the microstructure, mechanical properties and wear resistance of Fe-Al based alloys with various alloying elements were studied. The microstructures were examined by optical and scanning electron microsco...In this work the microstructure, mechanical properties and wear resistance of Fe-Al based alloys with various alloying elements were studied. The microstructures were examined by optical and scanning electron microscopy （SEM） equipped with an energy dispersive X-ray spectroscope （EDS）. Two types of alloys were prepared by vacuum arc melting. One is Fe-28Al based alloys （D03 structured） with and without alloying elements such as Mo and Zr. The other one is Fe-35Al based alloys （B2 structured） produced with the same manner. For both types of alloys, Mo addition had found to exhibit an equiaxed microstructure, while dendritic structure was observed to show the effect of Zr addition. These microstructural features were more evinced with increasing content of alloying element. Concerning the mechanical properties and wear resistance, Fe-35Al based alloys were superior to Fe-28Al based alloys over the whole temperature range investigated.展开更多
In this study, we report on advanced Ni3Al based high temperature structural alloys with Zr and B addition in order to apply in the fields of die-casting and high temperature press forming as die materials. Microstruc...In this study, we report on advanced Ni3Al based high temperature structural alloys with Zr and B addition in order to apply in the fields of die-casting and high temperature press forming as die materials. Microstructures and mechanical properties of Ni3Al based intermetallic alloys produced by vacuum arc melting were investigated in terms of phase analysis by using a scanning electron microscope （SEM） equipped with an X-ray energy dispersive spectrometer （EDS）, an X-ray diffractometer （XRD） and tensile test. The duplex microstructural feature consisting of γ＇ matrix phase and small intermetallic dispersoids was observed to be distributed over the whole microstructure. The ultimate tensile strength of the present alloy was superior to commercial iron-based and Ni-based die-materials especially in the high temperature region.展开更多
Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strength...Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strengthening mechanisms of these EHEAs have not been thoroughly investigated.In this study,we developed a series of dual-phase Al_((18–2x))Co_(30)Cr_((11+x))Fe_((11+x))Ni_(3)0(x=-1,0,1)eutectic and neareutectic HEAs containing face-centered cubic(FCC)and body-centered cubic(BCC)phases.Despite the high amount of BCC,which is referred to as the brittle phase,newly developed EHEAs exhibited superior fracture toughness.Interestingly,we discovered that a fully eutectic HEA exhibited further improvements in both yield stress and fracture toughness,outperforming our off-eutectic and other previously reported HEAs.By combining experiments and theoretical models,we demonstrated that the synergistic increase in both strength and toughness in our fully eutectic HEA was derived from the high hetero-deformationinduced(HDI)strengthening/toughening associated with a high misorientation angle at the grain/phase boundaries.展开更多
文摘In this work the microstructure, mechanical properties and wear resistance of Fe-Al based alloys with various alloying elements were studied. The microstructures were examined by optical and scanning electron microscopy （SEM） equipped with an energy dispersive X-ray spectroscope （EDS）. Two types of alloys were prepared by vacuum arc melting. One is Fe-28Al based alloys （D03 structured） with and without alloying elements such as Mo and Zr. The other one is Fe-35Al based alloys （B2 structured） produced with the same manner. For both types of alloys, Mo addition had found to exhibit an equiaxed microstructure, while dendritic structure was observed to show the effect of Zr addition. These microstructural features were more evinced with increasing content of alloying element. Concerning the mechanical properties and wear resistance, Fe-35Al based alloys were superior to Fe-28Al based alloys over the whole temperature range investigated.
文摘In this study, we report on advanced Ni3Al based high temperature structural alloys with Zr and B addition in order to apply in the fields of die-casting and high temperature press forming as die materials. Microstructures and mechanical properties of Ni3Al based intermetallic alloys produced by vacuum arc melting were investigated in terms of phase analysis by using a scanning electron microscope （SEM） equipped with an X-ray energy dispersive spectrometer （EDS）, an X-ray diffractometer （XRD） and tensile test. The duplex microstructural feature consisting of γ＇ matrix phase and small intermetallic dispersoids was observed to be distributed over the whole microstructure. The ultimate tensile strength of the present alloy was superior to commercial iron-based and Ni-based die-materials especially in the high temperature region.
基金supported by the National Research Foundation of Korea(No.NRF-2021R1A6A3A0108674211)the Fundamental Research Program of the Korean Institute of Materials Science(No.PNK8730)by Research Grant Council(RGC),Hong Kong Government,through General Research Fund(Nos.CityU11213118,CityU11200719 and CityU11209317).
文摘Heterostructured eutectic high-entropy alloys(EHEAs)have attracted significant attention owing to their novel properties,such as balanced combinations of strength and fracture toughness.However,the toughening/strengthening mechanisms of these EHEAs have not been thoroughly investigated.In this study,we developed a series of dual-phase Al_((18–2x))Co_(30)Cr_((11+x))Fe_((11+x))Ni_(3)0(x=-1,0,1)eutectic and neareutectic HEAs containing face-centered cubic(FCC)and body-centered cubic(BCC)phases.Despite the high amount of BCC,which is referred to as the brittle phase,newly developed EHEAs exhibited superior fracture toughness.Interestingly,we discovered that a fully eutectic HEA exhibited further improvements in both yield stress and fracture toughness,outperforming our off-eutectic and other previously reported HEAs.By combining experiments and theoretical models,we demonstrated that the synergistic increase in both strength and toughness in our fully eutectic HEA was derived from the high hetero-deformationinduced(HDI)strengthening/toughening associated with a high misorientation angle at the grain/phase boundaries.
