期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
石蜡/碱改性硅藻土/膨胀石墨复合相变储热材料的制备及性能
1
作者 陈丽梅 赵梦菲 +4 位作者 陈琳 李丁 李巍 韩维野 王鸿斌 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第3期533-543,共11页
通过碱处理,优化了硅藻土(DIA)的孔隙结构,提高了孔隙率,增加了石蜡(paraffin)负载量。通过直接浸渍法制备了新型性状稳定的石蜡/碱改性DIA/膨胀石墨(EG-alDIAP)复合材料,并研究了其结构与性能的关系。结果表明,复合相变材料的石蜡负载... 通过碱处理,优化了硅藻土(DIA)的孔隙结构,提高了孔隙率,增加了石蜡(paraffin)负载量。通过直接浸渍法制备了新型性状稳定的石蜡/碱改性DIA/膨胀石墨(EG-alDIAP)复合材料,并研究了其结构与性能的关系。结果表明,复合相变材料的石蜡负载量从47.4%提高到了61.1%,进而提高了复合材料的储热性能;向改性DIA中添加膨胀石墨(EG)提高了复合材料的传热能力,添加质量分数10%EG时导热系数提高了113%(从0.276 W·m^(-1)·K^(-1)提高到了0.589 W·m^(-1)·K^(-1))。随着EG含量的升高,复合相变材料的相变潜热有所增加,但化学相容性、稳定性等无明显变化。含10%EG的石蜡/碱改性DIA复合材料具有可靠的储能性能、良好的温度调节性能和蓄放热能力。 展开更多
关键词 复合相变材料 石蜡 碱改性硅藻土 膨胀石墨
下载PDF
发泡水泥砖的制备及性能 被引量:1
2
作者 韩维业 马瑞廷 《沈阳理工大学学报》 CAS 2018年第2期44-48,共5页
以普通硅酸盐水泥和煤矸石为主要原料,过氧化氢为发泡剂,镍锌铁氧体为吸波剂,采用四因素三水平[L_9(3~4)]正交试验制备发泡水泥砖。用极差分析方法确定发泡水泥的最优制备方案,结果为:煤矸石掺量为30%,水料比为0.46,发泡剂掺量为5%,聚... 以普通硅酸盐水泥和煤矸石为主要原料,过氧化氢为发泡剂,镍锌铁氧体为吸波剂,采用四因素三水平[L_9(3~4)]正交试验制备发泡水泥砖。用极差分析方法确定发泡水泥的最优制备方案,结果为:煤矸石掺量为30%,水料比为0.46,发泡剂掺量为5%,聚丙烯纤维掺量为0.4%。采用矢量网络分析仪测试了该组发泡水泥的介电常数和反射率,试样的介电损耗在0.17~0.31之间,测试频率在18GHz时,试样出现极大的反射损耗,为-6.2d B。 展开更多
关键词 发泡水泥 正交试验 微波吸收性能
下载PDF
Technical status and development direction of workover operation of PetroChina
3
作者 LEI Qun LI Yiliang +7 位作者 LI Tao LI Hui GUAN Baoshan BI Guoqiang WANG Jialu WENG Dingwei HUANG Shouzhi han weiye 《Petroleum Exploration and Development》 2020年第1期161-170,共10页
Through a comprehensive review of the development status of workover technology of PetroChina Company Limited(PetroChina), this paper presents the connotation of workover operation under the background of the new era,... Through a comprehensive review of the development status of workover technology of PetroChina Company Limited(PetroChina), this paper presents the connotation of workover operation under the background of the new era, the latest progress of workover operation in the respects of equipment, tools, technology and the construction of information and standardization. The gaps between PetroChina and foreign counterpart in workover technology are as follows: the level of automation and intellectualization of tools and equipment is relatively low, the snubbing operation in gas wells characterized by HT/HP and high H2 S is lagged behind;water plugging in the long horizontal wellbore needs to be further developed, coiled tubing and its relevant equipment for ultra-deep well operation has to be optimized;informationization, standardization and big data application of workover operation need to be started. Based on this as well as the development status of workover technology in China and the technical difficulties faced in the future, eight suggestions for future development are put forward:(1) strengthen the dynamic understanding of reservoir and improve the pertinence of workover schemes;(2) develop the general overhaul technology in a systematical way to tackle issues of seriously problematic wells;(3) put more efforts into the research of horizontal well workover operation and develop relevant technology for long horizontal section operation;(4) improve the snubbing technology and extend its applications;(5) expand the capacity of coiled tubing operation and improve the level of special operations;(6) develop automatic workover technology into the field of artificial intelligence;(7) promote clean operation in an all-round way and build green oil and gas fields;(8) perfect the informationization construction to realize the sharing of workover resources. 展开更多
关键词 WORKOVER operation WORKOVER EQUIPMENT WORKOVER TOOLS WORKOVER technology DEVELOPMENT STATUS DEVELOPMENT direction
下载PDF
碳化硅-硅化钼复合涂层的修补和性能研究
4
作者 韩维业 马瑞廷 《沈阳理工大学学报》 CAS 2020年第6期73-75,81,共4页
采用涂刷法与氩弧焊熔覆技术相结合方法,在碳/碳复合材料表面制备碳化硅-硅化钼复合修补涂层,研究复合修补涂层的抗氧化和耐烧蚀性能。扫描电镜(SEM)和金相显微镜结果表明,制备的修补涂层与基体结合紧密,修补涂层厚度约为60μm;试样在1... 采用涂刷法与氩弧焊熔覆技术相结合方法,在碳/碳复合材料表面制备碳化硅-硅化钼复合修补涂层,研究复合修补涂层的抗氧化和耐烧蚀性能。扫描电镜(SEM)和金相显微镜结果表明,制备的修补涂层与基体结合紧密,修补涂层厚度约为60μm;试样在1600℃高温下氧化4h后涂层质量增加约为0.36%;修补涂层的平均质量烧蚀率约为10.14mg/s。复合修补涂层表现出良好的抗氧化和耐烧蚀性能。 展开更多
关键词 修补涂层 氧化性能 烧蚀性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部