Inherent thermal-responsive strategies for safe lithium batteries

Safe batteries are the basis for next-generation application scenarios such as portable energy storage devices and electric vehicles,which are crucial to achieving carbon neutralization.Electrolytes,separators,and electrodes as main components of lithium batteries strongly affect the occurrence of safety accidents.Responsive materials,which can respond to external stimuli or environmental change,have triggered extensive attentions recently,holding great promise in facilitating safe and smart batteries.This review thoroughly discusses recent advances regarding the construction of high-safety lithium batteries based on internal thermal-responsive strategies,together with the corresponding changes in electrochemical performance under external stimulus.Furthermore,the existing challenges and outlook for the design of safe batteries are presented,creating valuable insights and proposing directions for the practical implementation of safe lithium batteries.

Wellbore-heat-transfer-model-based optimization and control for cooling downhole drilling fluid

To address the two critical issues of evaluating the necessity of implementing cooling techniques and achieving real-time temperature control of drilling fluids underground in the current drilling fluid cooling technology,we first established a temperature and pressure coupled downhole heat transfer model,which can be used in both water-based and oil-based drilling fluid.Then,fourteen factors,which could affect wellbore temperature,were analyzed.Based on the standard deviation of the downhole temperature corresponding to each influencing factor,the influence of each factor was quantified.The influencing factors that can be used to guide the drilling fluid's cooling technology were drilling fluid thermal conductivity,drilling fluid heat capacity,drilling fluid density,drill strings rotation speed,pump rate,viscosity,ROP,and injection temperature.The nondominated sorting genetic algorithm was used to optimize these six parameters,but the optimization process took 182 min.Combining these eight parameters'influence rules with the nondominated sorting genetic algorithm can reduce the optimization time to 108 s.Theoretically,the downhole temperature has been demonstrated to increase with the inlet temperature increasing linearly under quasi-steady states.Combining this law and PID,the downhole temperature can be controlled,which can reduce the energy for cooling the surface drilling fluid and can ensure the downhole temperature reaches the set value as soon as possible.

Properties of the phase diagram from the Nambu-Jona-Lasino model with a scalar-vector interaction

We investigated the properties of the phase diagram of high-order susceptibilities,speed of sound,and polytropic index based on an extended Nambu-Jona-Lasinio model with an eight-quark scalar-vector interaction.Non-monotonic behavior was observed in all these quantities around the phase transition boundary,which also revealed the properties of the critical point.Further,this study indicated that the chiral phase transition boundary and critical point could vary depending on the scalarvector coupling constant G_(SV).At finite densities and temperatures,the negative G_(SV)term exhibited attractive interactions,which enhanced the critical point temperature and reduced the chemical potential.The G_(SV)term also affected the properties of the high-order susceptibilities,speed of sound,and polytropic index near the critical point.The non-monotonic(peak or dip)structures of these quantities shifted to a low baryon chemical potential(and high temperature)with a negative G_(SV).G_(SV)also changed the amplitude and range of the nonmonotonic regions.Therefore,the scalar-vector interaction was useful for locating the phase boundary and critical point in QCD phase diagram by comparing the experimental data.The study of the non-monotonic behavior of high-order susceptibilities,speed of sound,and polytropic index is of great interest,and further observations related to high-order susceptibilities,speed of sound,and polytropic index being found and applied to the search for critical points in heavy-ion collisions and the study of compact stars are eagerly awaited.

Mechanical characteristics and reservoir stimulation mechanisms of the Gulong shale oil reservoirs, the northern Songliao Basin

Shale oil of the Qingshankou Formation of the Gulong Sag,the northern Songliao Basin,represents the first attempt at large-scale development of pure-shale-type shale oil in China.By integrating the multiscale refined reservoir characterization with macro-micro-scale mechanical testing,it is clarified that the Gulong shale is characterized by high clay mineral content,high rock plasticity,highly-developed bedding,and prominent mechanical anisotropy.A three-dimensional(3D)fracture propagation model of hydraulic fracturing was built for the Gulong shale,which fully captures the hydraulic fracture distribution pattern affected by the high bedding density,in-situ stress,and fracturing treatment parameters.Our research showed that due to influences of bedding,hydraulic fracturing in the Gulong shale forms a complex fracture morphology featuring the main fracture with multiple perpendicular branches that have different lengths(like the outdoor directional TV antenna);however,the vertical propagation of fractures is inhibited,and the fracture height is commonly less than 10 m.The limited stimulated reservoir volume(SRV)is the main problem facing the fracturing stimulation of the Gulong shale oil.Bedding density has vital effects on fracture morphology,so case-specific fracturing designs shall be developed for shale intervals with different bedding development degrees.For reservoirs with welldeveloped bedding,it is suggested to properly increase the perforation cluster spacing and raise the volume and proportions of viscous fluids of the pad,so as to effectively promote vertical fracture propagation and improve reservoir stimulation performance.This study integrates multi-scale fine reservoir characterization and macro-micro-scale mechanical testing,as well as the construction and numerical simulation of hydraulic fracturing models for high-density layered shale reservoirs,providing a new approach and methodological framework for the fracturing research of high-density layered shale reservoirs.

Influence of ear tags on the results of body composition analysis in mice

Background:The aim of this study was to investigate the influence of marking meth-ods on the outcomes of body composition analysis and provide guidance for the se-lection of marking methods in mouse body composition analysis.Methods:Male C57BL/6J mice aged 6 weeks were randomly assigned for pre-and post-ear tagging measurements.The body composition of the mice was measured using a small animal body composition analyzer,which provided measurements of the mass of fat,lean,and free fluid.Then,the mass of fat,lean and free fluid to body weight ratio was gained.Further data analysis was conducted to obtain the range and coeffi-cient of variation in body composition measurements for each mouse.The distribution of fat and lean tissue in the mice was also analyzed by comparing the fat-to-lean ratio.Results:(1)The mass of all body composition components in the ear tagging group was significantly lower than that in the control group.(2)There was a significant in-crease in the range and coefficient of variation of body composition measurements between the ear tagging group and the control group.(3)The fat-to-lean ratio in the ear tagging group was significantly lower than that in the control group.Conclusions:Ear tagging significantly lowered the results of body composition analy-sis in mice and higher the results of measurement error.Therefore,ear tagging should be avoided as much as possible when conducting body composition analysis experi-ments in mice.

Molecular mechanisms of bitterness and astringency in the oral cavity induced by soyasaponin

The interaction mechanism between soyasaponin(Ssa)and bitter receptors/mucin,as well as the saliva interface behavior of Ssa,were investigated to explore the presentation mechanism of Ssa bitterness and astringency(BA).Strong bitterness arising from high Ssa concentrations(0.5–1.5 mg/mL)had a masking effect on astringency.At Ssa concentrations of 1.0–1.5 mg/mL,Ssa micelles altered the structure of mucin,exposing its internal tryptophan to a more polar environment.At Ssa concentrations of 0.05–1.50 mg/mL,its reaction with mucin increased the aggregation of particles in artificial saliva,which reduced the frictional lubricating properties of oral saliva.Ssa-mucin interactions affected the salivary interfacial adsorption layer,and their complexes synergistically reduced the interfacial tension.Ssa monomers and soyasapogenols bind to bitter receptors/mucin via hydrogen bonding and hydrophobic interactions.Class A Ssa binds more strongly than class B Ssa,and thus likely presents a higher BA.In conclusion,Ssa interacts with bitter receptors/mucin causing conformational changes and aggregation of salivary mucin,resulting in diminished frictional lubricating properties of oral saliva.This,in turn,affects taste perception and gustatory transmission.

Lactulose enhances neuroplasticity to improve cognitive function in early hepatic encephalopathy

Lactulose is known to improve cognitive function in patients with early hepatic encephalopa- thy; however, the underlying mechanism remains poorly understood. In the present study, we investigated the behavioral and neurochemical effects of lactulose in a rat model of early hepatic encephalopathy induced by carbon tetrachloride. Immunohistochemistry showed that lactulose treatment promoted neurogenesis and increased the number of neurons and astrocytes in the hippocampus. Moreover, lactulose-treated rats showed shorter escape latencies than model rats in the Morris water maze, indicating that lactulose improved the cognitive impairments caused by hepatic encephalopathy. The present findings suggest that lactulose effectively improves cog- nitive function by enhancing neuroplasticity in a rat model of early hepatic encephalopathy.

Advancement and prospects of tumor gene therapy

Gene therapy is one of the most attractive fields in tumor therapy. In past decades, significant progress has been achieved. Various approaches, such as viral and non-viral vectors and physical methods, have been developed to make gene delivery safer and more efficient. Several therapeutic strategies have evolved, including gene-based (tumor suppressor genes, suicide genes, antiangiogenic genes, cytokine and oxidative stress-based genes) and RNA-based (antisense oligonucleotides and RNA interference) approaches. In addition, immune response-based strategies (dendritic cell- and T cell-based therapy) are also under investigation in tumor gene therapy. This review highlights the progress and recent developments in gene delivery systems, therapeutic strategies, and possible clinical directions for gene therapy.

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

Lithium(Li) metal anode has received extensive attentions due to its ultrahigh theoretical capacity and the most negative electrode potential. However, dendrite growth severely impedes the practical applications of the Li metal anode in rechargeable batteries. In this contribution, a mesoporous graphene with a high specific surface area was synthesized to host the Li metal anode. The mesoporous graphene host(MGH) has a high specific surface area(2090 m^2/g), which affords free space and an interconnected conductive pathway for Li plating and stripping, thus alleviating the volume variation and reducing the generation of dead Li during repeated cycles. More importantly, the high specific surface area of MGH efficiently reduces the local current density of the electrode, which favors a uniform Li nucleation and plating behavior, rendering a dendritefree deposition morphology at a low overpotential. These factors synergistically boost the Li utilization(90.1% vs. 70.1% for Cu foil) and life span(150 cycles vs. 100 cycles for Cu foil) with a low polarization of MGH electrode at an ultrahigh current of 15.0 mA/cm^2. The as-prepared MGH can provide fresh insights into the electrode design of the Li metal anode operating at high rates.

A"One Engine with Six Gears"System Engineering Methodology for the Economic Development of Unconventional Oil and Gas in China

Unconventional oil and gas resources have become the most important and realistic field for increasing China’s domestic oil and gas reserves and production.At present,the production scale does not match the massive amount of resources and the rapid growth of proven geological reserves.The challenges of technology,cost,management,and methodology restrict large-scale and economic development.Based on successful practices,a"one engine with six gears"system engineering methodology is put forward,which includes life-cycle management,overall synergy,interdisciplinary cross-service integration,marketoriented operation,socialized support,digitalized management,and low-carbon and green development.The methodology has been proved to be effective in multiple unconventional oil and gas national demonstration areas,including the Jimusar continental shale oil demonstration area.Disruptive views are introduced-namely,that unconventional oil and gas do not necessarily yield a low return,nor do they necessarily have a low recovery factor.A determination to achieve economic benefit must be a pervasive underlying goal for managers and experts.Return and recovery factors,as primary focuses,must be adhered to during China’s development of unconventional oil and gas.The required methodology transformation includes a revolution in management systems to significantly decrease cost and increase production,resulting in technological innovation.

Characterization of Phenol Biodegradation by Comamonas testosteroni ZD4-1 and Pseudomonas aeruginosa ZD4-3

To investigate the characteristic and biochemical mechanism about the phenol biodegradation by bacterial strains ZD 4-1 and ZD 4-3. Methods Bacterial strains ZD 4-1 and ZD 4-3 were isolated by using phenol as the sole source of carbon and energy, and identified by 16S rDNA sequence analysis. The concentrations of phenol and total organic carbon (TOC) were monitored to explore the degradation mechanism. The biodegradation intermediates were scanned at 375 nm by using a uv-vis spectrophotometer. The enzyme assays were performed to detect the activities of dioxygenases. Results Bacterial strains ZD 4-1 and ZD 4-3 were identified as Comamonas testosteroni and Pseudomonas aeruginosa by 16S rDNA sequence analysis, respectively. The growth of the two strains was observed on a variety of aromatic hydrocarbons. The strains ZD 4-1 and ZD 4-3 metabolized phenol via ortho-pathways and meta-pathways, respectively. In addition, the results of enzyme assays showed that the biodegradation efficiency of phenol by meta-pathways was higher than that by ortho-pathways. Finally, the results of induction experiment indicated that the catechol dioxygenases, both catechol 1,2-dioxygenase (C12O) and catechol 2,3-dioxygenase (C23O), were all inducible. Conclusion The strains ZD 4-1 and ZD 4-3 metabolize phenol through ortho-pathways and meta-pathway, respectively. Furthermore, the biodegradation efficiency of phenol by meta-pathways is higher than that by ortho-pathways.

The Geoscience Frontier of Gulong Shale Oil:Revealing the Role of Continental Shale from Oil Generation to Production

The clay mineral content of Daqing Gulong shale is in the range of about 35%–45%,with particle sizes less than 0.0039 mm.The horizontal fluidity of oil in Gulong shale is poor,with near-zero vertical flowability.As a result,Gulong shale has been considered to lack commercial value.In recent years,however,interdisciplinary research in geoscience,percolation mechanics,thermodynamics,and surface mechanics has demonstrated that Gulong shale oil has a high degree of maturity and a high residual hydrocarbon content.The expulsion efficiency of Gulong shale in the high mature stage is 32%–48%.Favorable storage spaces in Gulong shale include connecting pores and lamellar fractures developed between and within organic matter and clay mineral complexes.The shale oil mainly occurs in micro-and nano-pores,bedding fractures,and lamellar fractures,with a high gas–oil ratio and medium–high movable oil saturation.Gulong shale has the characteristics of high hardness,a high elastic modulus,and high fracture toughness.This study achieves breakthroughs in the exploration and development of Gulong shale,including the theories of hydrocarbon generation and accumulation,the technologies of mobility and fracturing,and recoverability.It confirms the major transition of Gulong shale from oil generation to oil production,which has extremely significant scientific value and application potential for China’s petroleum industry.

Acoustic reflection well logging modeling using the frequency-domain finite-element method with a hybrid PML

In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can better suppress the numerical instability in some extreme models, and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finite-element method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling （LWD）, in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.

Stable interfaces constructed by concentrated ether electrolytes to render robust lithium metal batteries

Lithium metal batteries(LMBs)are highly considered as promising candidates for next-generation energy storage systems.However,routine electrolytes cannot tolerate the high potential at cathodes and low potential at anodes simultaneously,leading to severe interfacial reactions.Herein,a highly concentrated electrolyte(HCE)region trapped in porous carbon coating layer is adopted to form a stable and highly conductive solid electrolyte interphase(SEI)on Li metal surface.The protected Li metal anode can potentially match the high-voltage cathode in ester electrolytes.Synergistically,this ingenious design promises high-voltage-resistant interfaces at cathodes and stable SEI with abundance of inorganic components at anodes simultaneously in high-voltage LMBs.The feasibility of this interface-regulation strategy is demonstrated in Li|LiFePO_(4) batteries,realizing a lifespan twice as long as the routine cells,with a huge capacity retention enhancement from 46.4%to 88.7%after 100 cycles.This contribution proof-ofconcepts the emerging principles on the formation and regulation of stable electrode/electrolyte interfaces in the cathode and anode simultaneously towards the next-generation high-energy-density batteries.

Dual-layer vermiculite nanosheet based hybrid film to suppress dendrite growth in lithium metal batteries

Lithium metal anode has become a favorable candidate for next-generation rechargeable batteries.However, the unstable interface between lithium metal and electrolyte leads to the growth of dendrites,resulting in the low Coulombic efficiency and even the safety concerns. Herein, a rigid-flexible dual-layer vermiculite nanosheet(VN) based organic-inorganic hybrid film on lithium metal anode is proposed to suppress dendrite growth and relieve volume fluctuations. The inner mechanically robust VN layer(3 μm thick) enhances the mechanical properties of the protective layer, while the outer polymer(4 μm thick) can enhance the flexibility of the hybrid layer. The Li | Li symmetric cell with protected lithium shows an extended life of over 670 h. The full cell with Li anode protected by dual-layer interface exhibits a better capacity retention of 80% after 174 cycles in comparison to bare Li anode with 94 cycles.This study provides a novel approach and a significant step towards prolonging lifespan of lithium metal batteries.

Ethical Reflection on the Emergency Engineering Management of COVID-19 Epidemic Prevention and Control

1.引言新冠肺炎防控是复杂的系统工程,每一个环节都必须紧紧相扣,工作十分艰巨,特别是应急工程管理面临着巨大挑战。如将抗击新冠肺炎的过程看作一场大规模的道德实践[1],可以将参与其中的利益相关者按照角色归为属地决策者、医学科学家、医务工作者、社会公众等不同群体。不同的利益相关者群体承担不同的社会义务和职业责任,也享有相应的权力和利益。

QSAR of Estrogen of Bisphenol A with 3D Vector of Atomic Property Correlation

Considering atomic property vector and atomic correlative function, the 3-dimensional structural vector of atomic property correlation （3D-VAPC）, a novel descriptor,is defined to characterize a 3-dimensional molecular structure by introducing self-adaptability regulation mechanism and the idea of orientating to customers. Characterizing the structures of 25 bisphenol A compounds by this vector, the QSAR models of three kinds of estrogen activities （ER affinities, gene induction and cell proliferation） have high multiple correlation coefficient （Rcum^2=0.933, 0.813, 0.959） and cross verification coefficient （Qcum^2=0.847, 0.953, 0.798） by support vector machine （SVM）, which suits for nonlinear circumstances. The above results show that the models successfully express the correlation between structure and three kinds of estrogen activities. Therefore, 3D-VAPC exactly reflects the molecular structural information and SVM method correctly describes the correlation between information and property of the compounds.

Rare earth elemental and Sr isotopic evidence for seawater intrusion event of the Songliao Basin 91 million years ago

Petrogenesis of lacustrine dolostone is closely related with paleo-lake water conditions.Here we report the high spatial-resolution petrographic and geochemical results of a lacustrine dolomite nodule from the Qingshankou Formation,the Songliao Basin.Sedimentary and elemental signatures confirm the protogenetic origin of this nodule and its effectiveness in recording geochemical characteristics of paleo-lake water during dolomitization.The low Y/Ho ratios,middle rare earth element(MREE)enrichment and subtle positive Eu anomalies within the nodule indicate a fresh water source.However,the Sr isotope values in the core of the nodule(0.7076-0.7080)are close to contemporaneous seawater(0.7074),yet different from the modern river(0.7120)and the host black shale(0.7100).On the premise of excluding the influence of hydrothermal fluids,the significantly low strontium isotope values of the lacustrine dolomite might be caused by seawater interference during dolomitization.Our findings demonstrate that lacustrine dolomite within black shales is not only a faithful tracer of diagenetic water environment,but also a novel and easily identified mineralogical evidence for episodic seawater intrusion event(91 Ma)in the Songliao Basin,which supplements other paleontological and geochemical evidence.

Geochemistry of subducted metabasites exhumed from the Mariana forearc:Implications for Pacific seamount subduction

Seamounts on the drifting oceanic crust are inevitably carried by plate motions and eventually accreted or subducted.However,the geochemical signatures of the subducted seamounts and the significance of seamount subduction are not well constrained.Hundreds of seamounts have subducted beneath the Philippine Sea Plate following the westward subduction of the Pacific Plate since the Eocene(~52 Ma).The subducted oceanic crust and seamount materials can be exhumed from the mantle depth to the seafloor in the Mariana forearc region by serpentinite mud volcanoes,providing exceptional opportunities to directly study the subducted oceanic crust and seamounts.The International Ocean Discovery Program(IODP)expedition 366 has recovered a few metamorphosed mafic clasts exhumed from the Mariana forearc serpentinite mud volcanoes,e.g.,the Fantangis?a and Asùt Tesoru seamounts.These mafic clasts have tholeiitic to alkaline affinities with distinct trace elements and Nd-Hf isotopes characteristics,suggesting different provenances and mantle sources.The tholeiites from the Fantangisna Seamount have trace element characteristics typical of mid-ocean ridge basalt.The Pacific-type Hf-Nd isotopic compositions,combined with the greenschist metamorphism of these tholeiites further suggest that they came from the subducted Pacific oceanic crust.The alkali basalts-dolerites from the Fantangisna and Asùt Tesoru seamounts show ocean island basalt(OIB)-like geochemical characteristics.The OIB-like geochemical signatures and the low-grade metamorphism of these alkali basalts-dolerites suggest they came from subducted seamounts that originally formed in an intraplate setting on the Pacific Plate.The Pacific Plate origin of these metabasites suggests they were formed in the Early Cretaceous or earlier.Two types of OIBs have been recognized from alkali metabasites,one of which is geochemically similar to the HIMU-EMI-type OIBs from the West Pacific Seamount Province,and another is similar to the EMII-type OIBs from the Samoa Island in southern Pacific,with negative Nb-Ta-Ti anomalies and enriched Nd-Hf isotopes.Generally,these alkali metabasites are sourced from the heterogeneous mantle sources that are similar to the present South Pacific Isotopic and Thermal Anomaly.This study provides direct evidence for seamount subduction in the Mariana convergent margins.We suggest seamount subduction is significant to element cycling,mantle heterogeneity,and mantle oxidation in subduction zones.

Spatially resolved micron-scale wrinkle structures at asphaltene films induced by mild thermal treatment and its impact on emulsion stability

Mild thermal treatment is an important partial upgrading technique to enable bitumen pipeline transportation,but no attention has been paid to the impact of mild thermal treatment on the emulsification behavior of emerging partially upgraded bitumen.Asphaltene compounds are active emulsion stabilizers in bitumen oil.The emulsion stabilizing capacity of bitumen asphaltenes was investigated,before and after a mild thermal treatment at 400℃.The structural morphology and mechanical property of the asphaltene interfacial films were analyzed by using a combination of cryo-SEM,Langmuir trough,and Brewster angle microscopy.The thermal treatment significantly enhanced the emulsion stabilizing capacity of bitumen asphaltenes;the interfacial films formed by the thermally treated asphaltene samples appeared to be rougher and thicker with more abundant micron-scale wrinkle structures.The interfacial corrugation may intensify the mechanical stability/flexibility of the asphaltene films and consequently strengthen the stability of emulsion droplet.