Paratungstate-loaded titania catalysts were prepared %via% the addition of a series of aqueous solutions of paratungstate(denoted as W_ 7) into an isopropanol solution of Ti[OCH(CH_ 3)_ 2]_ 4 by means of the sol-gel m...Paratungstate-loaded titania catalysts were prepared %via% the addition of a series of aqueous solutions of paratungstate(denoted as W_ 7) into an isopropanol solution of Ti[OCH(CH_ 3)_ 2]_ 4 by means of the sol-gel method. The catalysts were characterized by EDX, BET, FTIR, UV-Vis DRS, XRD and the results indicate that such paratungstate-loaded catalysts maintained their heptatungstate structure in the anatase titania matrix up to 400 ℃. The catalysts were tested for the heterogeneous photodegradation of chlorobenzene in aqueous media and showed a better catalytic activity than P-25 TiO_ 2 because paratungstate can prevent the recombination of the holes and electrons produced during irradiation. Moreover, the paratungstate-loaded titania catalysts can resist the disaggregation during the photoirradiation and can be easily recycled from the aqueous suspensions after reactions.展开更多
Surface morphology, physical-chemical properties of skeletal iron catalysts prepared by leaching of the rapidly quenched(RQ) and naturally quenched(NQ) Fe-Al alloys with an aqueous solution of NaOH were characterized...Surface morphology, physical-chemical properties of skeletal iron catalysts prepared by leaching of the rapidly quenched(RQ) and naturally quenched(NQ) Fe-Al alloys with an aqueous solution of NaOH were characterized by using a series of techniques including XRD, BET, XPS, SEM, H_2 and CO-TPD. It was found that the RQ skeletal iron catalyst exhibits a smaller particle size, larger specific surface area and pore volume than the NQ one. The H_2 and CO-TPD experiments showed that the RQ skeletal iron exhibits stronger affinity for H_2 and milder affinity for CO compared with the NQ one. But the NQ skeletal catalyst shows a better thermal stability than the RQ catalyst.展开更多
文摘Paratungstate-loaded titania catalysts were prepared %via% the addition of a series of aqueous solutions of paratungstate(denoted as W_ 7) into an isopropanol solution of Ti[OCH(CH_ 3)_ 2]_ 4 by means of the sol-gel method. The catalysts were characterized by EDX, BET, FTIR, UV-Vis DRS, XRD and the results indicate that such paratungstate-loaded catalysts maintained their heptatungstate structure in the anatase titania matrix up to 400 ℃. The catalysts were tested for the heterogeneous photodegradation of chlorobenzene in aqueous media and showed a better catalytic activity than P-25 TiO_ 2 because paratungstate can prevent the recombination of the holes and electrons produced during irradiation. Moreover, the paratungstate-loaded titania catalysts can resist the disaggregation during the photoirradiation and can be easily recycled from the aqueous suspensions after reactions.
基金Supported by the State Key L aboratory of Coal Conversion ICC CAS and the Key L aboratory of Science and Technology of Controllable Chemical Reactions BU CT of Ministry of Education of China
文摘Surface morphology, physical-chemical properties of skeletal iron catalysts prepared by leaching of the rapidly quenched(RQ) and naturally quenched(NQ) Fe-Al alloys with an aqueous solution of NaOH were characterized by using a series of techniques including XRD, BET, XPS, SEM, H_2 and CO-TPD. It was found that the RQ skeletal iron catalyst exhibits a smaller particle size, larger specific surface area and pore volume than the NQ one. The H_2 and CO-TPD experiments showed that the RQ skeletal iron exhibits stronger affinity for H_2 and milder affinity for CO compared with the NQ one. But the NQ skeletal catalyst shows a better thermal stability than the RQ catalyst.
